PB-CMQ1332-QH-0000

12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1332-QH Features 32 dBm (Typ) Saturated Output Power 33 dB (Typ) Linear Gain ESD Protection On Die Unconditionally Stable Low Cost, Surfae Mount Package 4x4x1.4 mm RoHS Compliant 7V, 770mA Applications Ku-Band VSAT Transmit Subsystems General Description The CMQ1332-QH is a pHEMT power amplifier packaged in a 4X4 QFN plastic package. The CMQ1332-QH is self contained with 50 ohm input and output terminals. The PAM is unconditionally stable and the internal matching allows for a reduction in external components making this product a simple and low cost solution. RoHS compliance and on-chip ESD protection make it an ideal solution in all manufacturing environments. The power amplifier is intended for use as the final RF amplifier in the extended Ku-Band satellite applications. Absolute Maximum Ratings Drain Voltage (+Vdd) Gate Voltage (Vgg) Quiescent Current (Idq) Gate Current (Ig) RF Input Power (Pin) Dissipated Power (Piss) Storage Temperature Operating Backside Temperature +8 V -3 V 1000 mA 5 mA +11 dBm 8W -50 ºC to +150 ºC -40 ºC to +80 ºC Electrical Characteristics (T = +25ºC,Vd = 7V, Id = 770mA) Parameter Operating Frequency (F) Drain Current (At Saturation) (Id) Drain Voltage (Vd) Gate Voltage (RF ON) (Vg) Linear Gain (S21) Input Reflection Coefficient (S11) Output Reflection Coefficient (S22) Noise Figure (NF) Saturated Output Power (Psat) Power @ 1dB Compression Gain (P1dB) Power Added Efficiency (At Saturation) (PAE) Gate Current (Igs) Units GHz mA Volts Volts dB dB dB dB dBm dBm % mA Min. 12.5 6 -2 Typ. 770 7 33 -11 -8 9 32 29 27 0.5 Max. 14.5 7.5 -0.2 31.0 - 5 Electrical Specifications (TA = -25C to 80C) Operation outside these limits can cause permanent damage. Parameter Condition Saturated Output Power Variation from room temperature Linear Gain Variation from room temperature Stability Units dB dB Min Typ Max -0.7 2.5 -2.5 Unconditional Stable Page 1 of 5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1332-QH Typical Performance Psat Vd = 7V, Iq = 770mA, Pin = 5dBm 34 33 32 31 30 Pout (dBm) 29 28 27 26 25 24 23 22 21 20 12.5 13 13.5 Frequency (GHz) 14 14.5 Psat Small Signal Performance 6V, 770mA 35 30 25 20 30 25 20 15 10 5 0 -5 -10 -15 -20 10 11 12 13 14 15 16 17 18 S21 (dB) 15 10 5 0 -5 -10 -15 S11, S22 (dB) S21 S11 S22 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1332-QH Recommended Application Circuit Schematic 1uF Biasing notes: 1. Dual bias is required. 2. 1000pf bypass capacitors are needed on PC board as close as possible to device as shown in the schematic. 3. No DC block is required at RF IN/OUT 4. Negative (-) bias must be applied to Vgg before applying positive (+) bias to Vdd. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1332-QH Physical Dimensions CMQ1332G Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1332-QH Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information Part Number for Ordering CMQ1332-QH-0G00 CMQ1332-QH-0G0T PB-CMQ1332-QH-0000 Description Matte Tin plated RoHS compliant QFN4X4 24L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN4X4 24L Surface mount package in tape and reel CMQ1332-QH Evaluation Board We also offer this part with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.