ADE-1LH+

Surface Mount Frequency Mixer ADE-1LH+ Level 10 (LO Power +10 dBm) 0.5 to 500 MHz Features Maximum Ratings Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power 50mW IF Current 40mA Permanent damage may occur if any of these limits are exceeded. Pin Connections Generic photo used for illustration purposes only • low conversion loss, 5.0 dB typ. • excellent L-R isolation, 55 dB typ. and L-I isolation, 45 dB typ. • good IP3, 15 dBm typ. • aqueous washable • protected by US Patent 6,133,525 CASE STYLE: CD636 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications LO 6 Reel Size 7” 13” • VHF/UHF receivers RF 3 and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200 500,1000 IF 2 GROUND 1,4,5 Electrical Specifications FREQUENCY (MHz) Outline Drawing LO/RF CONVERSION LOSS (dB) Mid-Band m IF fL-fU 0.5-500 DC-500 — X σ Max. 5.0 0.10 6.5 LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) L M U L M U Total Range Max. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. 8.2 1 dB COMP.: +5 dBm typ. 65 50 55 35 47 L = low range [fL to 10 fL] m= mid band [2fL to fU/2] 26 52 40 45 22 M = mid range [10 fL to fU/2] 34 IP3 at center band (dBm) Typ. 20 15 U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) PCB Land Pattern RF Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) A .272 6.91 B .310 7.87 C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .162 4.11 F .055 1.40 G .100 2.54 wt grams 0.25 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) LO 0.50 0.80 1.00 5.00 10.00 30.50 30.80 31.00 35.00 40.00 Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +10dBm LO +10dBm LO +10dBm LO +10dBm LO +10dBm 5.87 5.68 5.70 5.21 5.08 67.00 66.83 67.01 65.67 64.17 52.50 52.17 52.00 50.33 50.17 1.54 1.37 1.33 1.23 1.22 2.56 2.56 2.61 2.61 2.67 50.00 71.52 100.00 142.94 150.00 80.00 101.52 130.00 172.94 180.00 5.30 5.27 5.31 5.47 5.48 59.16 57.66 56.51 55.83 55.34 43.84 42.17 40.51 38.33 38.00 1.15 1.13 1.12 1.16 1.16 2.56 2.61 2.62 2.67 2.61 200.00 214.36 250.00 285.79 300.00 230.00 244.36 280.00 315.79 330.00 5.49 5.48 5.54 5.76 5.85 52.67 52.01 51.34 46.84 45.83 37.50 37.34 36.67 34.51 33.67 1.14 1.13 1.08 1.09 1.09 2.73 2.73 2.56 2.67 2.67 350.00 400.00 428.63 470.00 500.00 380.00 430.00 458.63 500.00 530.00 5.67 5.74 6.00 6.30 6.61 48.00 47.01 46.66 48.34 44.33 30.67 27.33 27.00 27.67 27.33 1.14 1.16 1.12 1.06 1.10 2.56 2.86 2.80 3.01 2.93 Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E M158496 ADE-1LH ED-7693/1 WL/TD/CP/AM 200421 Page 1 of 2 ADE-1LH+ Performance Charts LO=+7 dBm 9.0 LO=+10 dBm 6.0 5.0 4.0 3.0 40 30 10 90 80 0 500 LO=+7 dBm LO=+10 dBm 100 200 300 FREQUENCY (MHz) 400 500 ADE-1LH+ RF VSWR 2.0 LO=+13 dBm LO=+7 dBm LO=+10 dBm LO=+13 dBm 1.8 70 VSWR 60 50 40 30 1.6 1.4 1.2 20 1.0 10 0 100 200 300 FREQUENCY (MHz) 400 0 500 100 200 300 FREQUENCY (MHz) ADE-1LH+ LO VSWR 8.0 400 500 ADE-1LH+ IF VSWR 4.0 7.0 LO=+7 dBm LO=+10 dBm LO=+13 dBm LO=+7 dBm 3.5 6.0 LO=+10 dBm LO=+13 dBm 3.0 5.0 VSWR VSWR 50 1.0 ADE-1LH+ L-I ISOLATION LO=+13 dBm 60 20 400 LO=+10 dBm 70 2.0 200 300 FREQUENCY (MHz) LO=+7 dBm 80 7.0 100 ADE-1LH+ L-R ISOLATION 90 LO=+13 dBm 8.0 0 ISOLATION (dB) ADE-1LH+ CONVERSION LOSS ISOLATION (dB) CONVERSION LOSS (dB) 10.0 at IF Freq of 30 MHz 4.0 2.5 3.0 2.0 2.0 1.5 1.0 0 100 200 300 FREQUENCY (MHz) 400 500 1.0 0 100 200 300 FREQUENCY (MHz) 400 500 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2