ADE-92LH

Frequency Mixer The Big Deal ADE-92LH+ Level 10 (LO Power +10 dBm) 400 to 900 MHz • Excellent IP3: +24dBm with reduced LO power (+10dBm) • High LO-RF Isolation across the entire band • Low cost, miniature size CASE STYLE: CD636 Product Overview The ADE-92LH+ is passive double balanced mixer featuring a FET quad in a ring configuration providing high dynamic range performance in a small, low cost, RoHS-compliant package. The ADE-92LH+ provides RF/LO response from 400 to 900 MHz and IF response from DC to 150 MHz. It is especially useful in systems where cost and performance are critical, such as GSM cellular system applications. This mixer is ideal for upconverter and downconverter applications and does not require external matching components or DC power. Key Features Feature Advantages High IP3, +24 dBm typ. with reduced LO Allows for improved dynamic range, a critical factor in receiver applications. power requirement. Low conversion loss, 7 dB typ. High LO to RF isolation, 40 dB typ. Broadband matching Insensitive to LO power level variations Small package 0.310” x 0.220” x 0.162” Enables lower NF front ends, which can improve system sensitivity. Reduced levels of unwanted responses that can interfere with system performance. The IF port VSWR is less than 1.6 to 1 over the specified frequency range, which simplifies impedance matching with adjoining components. Allows the use of an LO amplifier with less stringent gain flatness, enabling the use of lower cost amplifiers. Enables high density packaging. ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine IF/RF MICROWAVE COMPONENTS Mini-Circuits ® For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. Page 1 of 3 High IP3 Frequency Mixer Level 10 (LO Power +10 dBm) 400 to 900 MHz Maximum Ratings Operating Temperature Storage Temperature RF Power IF Current -40°C to 85°C -55°C to 100°C 100 mW 40 mA ADE-92LH+ Features Permanent damage may occur if any of these limits are exceeded. • high IP3, 24 dBm typ. • good L-R isolation, 40 dB typ. • good L-I isolation, 26 dB typ. • aqueous washable • patent pending CASE STYLE: CD636 PRICE: $ 5.45 ea. QTY. (10-49) + RoHS compliant in accordance with EU Directive (2002/95/EC) The +Suffix has been added in order to identify RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. Pin Connections LO RF IF GROUND 6 3 2 1,4,5 Applications • cellular • GSM • ISM Electrical Specifications FREQUENCY (MHz) LO/RF fL-fU IF X DC-150* 6.8 σ 0.1 Max. 9.5 Typ. 40 Min. 31 Typ. 26 Min. 18 Outline Drawing F B E MAX CONVERSION LOSS (dB) LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) IP3 at center band (dBm) Typ. 24 C A±.01 400-900 INDEX H TYP G TYP J REF. 1 dB COMP.: +14 dBm typ. * Conversion Loss increases up to 10dB @ IF Frequency 120-150MHz. PCB Land Pattern G TYP Typical Performance Data Frequency (MHz) Conversion Loss (dB) LO +10dBm 6.20 6.13 6.09 6.09 6.08 6.14 6.34 6.42 6.51 6.64 6.82 6.95 7.17 7.29 7.33 7.33 7.51 7.63 7.71 7.84 Isolation L-R (dB) LO +10dBm 40.91 41.31 41.99 42.30 42.21 41.80 40.68 39.89 39.15 38.42 37.37 37.26 37.77 38.66 39.66 39.87 39.14 38.82 38.55 38.38 Isolation L-I (dB) LO +10dBm 29.23 29.59 29.79 29.06 28.27 27.41 26.00 25.43 24.94 24.58 24.21 24.10 24.14 24.35 24.66 25.06 25.81 25.96 25.93 25.96 VSWR RF PORT (:1) LO +10dBm 1.96 1.97 2.03 2.15 2.18 2.21 2.39 2.49 2.58 2.62 2.79 2.91 2.98 3.04 3.06 3.02 3.07 3.18 3.26 3.31 VSWR LO PORT (:1) LO +10dBm 23.19 21.89 18.94 15.20 13.20 11.41 8.37 7.13 6.08 5.23 4.05 3.65 3.21 3.13 3.12 3.17 3.37 3.51 3.66 3.83 IP3 (dBm) LO +10dBm 19.62 19.85 20.67 22.3 22.9 23.42 25.68 27.57 28.71 28.63 28.3 26.13 24.34 25.79 29.27 28.2 28.53 28.36 27.7 27.45 K TYP D TYP L RF 400.10 420.10 460.10 500.10 520.10 540.10 580.10 600.10 620.10 640.10 680.10 700.10 740.10 760.10 780.10 800.10 840.10 860.10 880.10 900.10 LO 470.10 490.10 530.10 570.10 590.10 610.10 650.10 670.10 690.10 710.10 750.10 770.10 810.10 830.10 850.10 870.10 910.10 930.10 950.10 970.10 Suggested Layout Tolerance to be within ±.002 Outline Dimensions ( inch ) mm A .272 6.91 H .030 0.76 B .310 7.87 J .026 0.66 C .220 5.58 K .065 1.65 D .100 2.54 L .300 7.62 E .162 4.11 F .055 1.40 G .100 2.54 wt grams .25 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) Electrical Schematic RF LO Matching Network FET Quad Matching Network IF NOTES: 1. TRACE WIDTH IS SHOWN FOR ROGERS RO4350B WITH DIELECTRIC THICKNESS .030"± .002"; COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED. 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER) DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine IF/RF MICROWAVE COMPONENTS Mini-Circuits ® For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. REV. OR M121478 ADE-92LH+ EDR-9386/1F2 RAV 100729 Page 2 of 3 Performance Charts 8.8 at IF freq of 70MHz ADE-92LH+ 51 ADE-92LH+ CONVERSION LOSS LO=+10dBm LO=+13dBm ISOLATION (dB) ADE-92LH+ L-R ISOLATION LO=+7dBm LO=+10dBm LO=+13dBm CONVERSION LOSS (dB) 8.4 8.0 7.6 7.2 6.8 6.4 6.0 5.6 400 LO=+7dBm 49 47 45 43 41 39 37 35 400 500 600 700 RF FREQUENCY (MHz) 800 900 500 600 700 LO FREQUENCY (MHz) 800 900 38 36 ISOLATION (dB) ADE-92LH+ L-I ISOLATION LO=+7dBm LO=+10dBm LO=+13dBm 4.8 4.4 4.0 VSWR ADE-92LH+ RF VSWR LO=+7dBm LO=+10dBm LO=+13dBm 34 32 30 28 26 24 22 400 500 600 700 LO FREQUENCY (MHz) 800 900 3.6 3.2 2.8 2.4 2.0 1.6 400 500 600 700 RF FREQUENCY (MHz) 800 900 34 30 26 VSWR ADE-92LH+ LO VSWR LO=+7dBm LO=+10dBm LO=+13dBm 1.8 1.7 1.6 VSWR ADE-92LH+ IF VSWR LO=+7dBm LO=+10dBm LO=+13dBm 22 18 14 10 6 2 400 500 600 700 LO FREQUENCY (MHz) 800 900 1.5 1.4 1.3 1.2 1.1 1.0 0 30 60 90 IF FREQUENCY (MHz) 120 150 50 45 40 IP3 (dBm) 35 30 25 20 15 10 400 500 LO=+7dBm ADE-92LH+ IP3 LO=+10dBm LO=+13dBm 600 700 RF FREQUENCY (MHz) 800 ® 900 For detailed performance specs & shopping online see web site TM ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine IF/RF MICROWAVE COMPONENTS Mini-Circuits Provides ACTUAL Data Instantly at minicircuits.com Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. Page 3 of 3