ADP-2-1W+

Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω 1 to 650 MHz Maximum Ratings Operating Temperature Storage Temperature Features Power Input (as a splitter) 2W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections SUM PORT 1 PORT 1 3 PORT 2 4 CASE STYLE: CD636 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Reel Size 7” 13” • VHF/UHF receivers/transmitters e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200 500, 1000 Electrical Specifications GROUND 6 NOT USED Generic photo used for illustration purposes only • low insertion loss, 0.25 dB typ. • excellent amplitude unbalance, 0.01 dB typ. • very good phase unbalance, 0.2 deg. typ. • aqueous washable • protected under U.S. Patent 6,133,525 -40°C to 85°C -55°C to 100°C Internal Dissipation ADP-2-1W+ FREQ. RANGE (MHz) 2,5 Outline Drawing fL-fU 1-650 L = 1-10 MHz ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) L M U L M U L M U L M U Typ. Min. Typ. Min. Typ. Min. Typ. Max. Typ. Max. Typ. Max. Max. Max. Max. Max. Max. Max. 0.2 0.25 0.8 0.5 2.0 2.0 3.0 0.15 0.2 0.3 30 20 30 M = 10-325 MHz 20 24 20 0.8 1.0 U = 325-650 MHz Typical Performance Data Frequency (MHz) PCB Land Pattern Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) A .272 6.91 B .310 7.87 C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .162 4.11 F .055 1.40 G .100 2.54 S-1 Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-2 1.00 30.00 60.00 90.00 150.00 3.33 3.33 3.18 3.17 3.21 3.21 3.22 3.22 3.26 3.25 0.00 0.01 0.00 0.00 0.01 29.22 44.81 39.19 36.18 32.49 0.03 0.03 0.01 0.00 0.12 1.08 1.26 1.11 1.15 1.13 1.15 1.11 1.14 1.14 1.14 1.26 1.15 1.15 1.15 1.15 200.00 250.00 300.00 350.00 425.00 3.31 3.28 3.33 3.32 3.37 3.35 3.40 3.36 3.47 3.42 0.03 0.02 0.02 0.04 0.05 29.34 29.13 27.54 26.57 25.55 0.09 0.06 0.17 0.09 0.28 1.17 1.18 1.16 1.18 1.22 1.14 1.14 1.15 1.14 1.15 1.13 1.13 1.15 1.14 1.13 475.00 525.00 575.00 625.00 650.00 3.51 3.44 3.56 3.49 3.59 3.50 3.68 3.54 3.72 3.58 0.07 0.07 0.09 0.14 0.14 25.55 25.05 25.75 25.60 25.51 0.30 0.30 0.30 0.47 0.52 1.23 1.23 1.25 1.23 1.26 1.17 1.17 1.18 1.22 1.23 1.16 1.16 1.15 1.16 1.18 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.25 ADP-2-1W+ TOTAL LOSS 4.0 ADP-2-1W+ ISOLATION 48 S-2(dB) 44 3.8 ISOLATION (dB) TOTAL LOSS (dB) S-1(dB) Demo Board MCL P/N: TB-48+ Suggested PCB Layout (PL-035) Amplitude Unbalance (dB) Total Loss1 (dB) 3.6 3.4 3.2 40 36 32 28 24 20 3.0 0 130 260 390 FREQUENCY (MHz) 520 650 0 130 260 390 FREQUENCY (MHz) 520 650 ADP-2-1W+ VSWR 1.42 1.36 #S-VSWR #1-VSWR electrical schematic #2-VSWR 1.30 VSWR 1.24 1.18 1.12 1.06 1.00 0 130 260 390 FREQUENCY (MHz) 520 650 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E M158496 ED-7943/1 ADP-2-1W+ HY/TD/CP/AM 200421 Page 1 of 1