ADP-2-20+

Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω 20 to 2000 MHz Maximum Ratings Operating Temperature Storage Temperature Generic photo used for illustration purposes only Features Power Input (as a splitter) CASE STYLE: CD542 • low insertion loss, 0.7 dB typ. • excellent insertion loss flatness, 0.4 dB peak to peak • excellent amplitude unbalance, 0.1 dB typ. • good phase unbalance, 1.1 deg. typ. • aqueous washable • protected under U.S. Patent 6,133,525 -40°C to 85°C -55°C to 100°C Internal Dissipation ADP-2-20+ 1W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size 7” 13” Applications SUM PORT 1 PORT 1 3 PORT 2 4 GROUND 6 NOT USED • instrumentation • PCS/cellular • GPS Electrical Specifications FREQ. RANGE (MHz) 2,5 Outline Drawing fL-fU 20-2000 e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200, 500 1000 ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) L M U L M U L M U L M U Typ. Min Typ. Min Typ. Min Typ. Max. Typ. Max. Typ. Max. Max. Max. Max. Max. Max. Max. 0.5 0.7 0.8 2.0 3.0 5.0 0.2 0.3 0.7 18 L = 20-200 MHz 15 18 15 18 M = 200-1000 MHz 15 0.8 1.0 1.5 U = 1000-2000 MHz Typical Performance Data Frequency (MHz) 20.00 70.00 100.00 200.00 300.00 Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) B .310 7.87 C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .112 2.84 F .055 1.40 G .100 2.54 VSWR S VSWR 1 VSWR 2 S-2 0.00 0.01 0.01 0.00 0.02 18.61 18.56 18.61 18.50 18.49 0.00 0.18 0.19 0.45 0.59 1.98 1.55 1.98 1.56 1.97 1.56 1.97 1.57 1.97 1.58 1.55 1.56 1.56 1.58 1.59 400.00 500.00 700.00 900.00 1100.00 3.75 3.78 3.74 3.77 3.70 3.74 3.55 3.61 3.71 3.78 0.02 0.03 0.03 0.06 0.06 18.55 18.38 17.99 17.94 17.96 0.68 0.88 1.04 1.35 1.43 1.98 1.98 2.00 2.01 2.00 1.59 1.60 1.60 1.61 1.60 1.60 1.61 1.62 1.63 1.64 1300.00 1500.00 1700.00 1900.00 2000.00 3.64 3.69 3.96 3.84 3.79 0.11 0.11 0.12 0.12 0.11 17.74 18.09 18.37 18.77 18.89 1.43 1.32 1.26 1.05 0.78 1.95 1.87 1.75 1.60 1.52 1.58 1.55 1.50 1.42 1.38 1.63 1.61 1.58 1.53 1.51 3.75 3.80 4.08 3.96 3.90 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.20 Demo Board MCL P/N: TB-48+ Suggested PCB Layout (PL-035) Phase Unbalance (deg.) 3.55 3.56 3.54 3.55 3.60 3.61 3.66 3.66 3.70 3.72 ADP-2-20+ TOTAL LOSS 4.4 TOTAL LOSS (dB) A .272 6.91 S-1 Isolation (dB) 4.2 S-1(dB) ADP-2-20+ ISOLATION 35 S-2(dB) ISOLATION (dB) PCB Land Pattern Amplitude Unbalance (dB) Total Loss1 (dB) 4.0 3.8 3.6 3.4 3.2 3.0 30 25 20 15 10 0 400 800 1200 1600 2000 FREQUENCY (MHz) #S-VSWR 2.6 #1-VSWR 400 800 1200 1600 2000 FREQUENCY (MHz) ADP-2-20+ VSWR 3.0 0 electrical schematic #2-VSWR VSWR 2.2 1.8 1.4 1.0 0 400 800 1200 1600 2000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. F M158496 ED-7369/1 ADP-2-20+ HY/TD/CP/AM 200420 Page 1 of 1