AMK-2-13+

X2 Frequency Multiplier 50Ω AMK-2-13+ Output 20 to 1000 MHz Maximum Ratings Operating Temperature Storage Temperature CASE STYLE: CD542 Features • broadband • low conversion loss, 11.4 dB typ. • high rejection F1 and F3, -45 dBc typ. • low cost • aqueous washable -40°C to 85°C -55°C to 100°C RF Input Power 23 dBm Permanent damage may occur if any of these limits are exceeded. Pin Connections +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • synthesizers • local oscillators • satellite up and down converters INPUT 3 OUTPUT 6 GROUND 1,4,5 NOT USED 2 and Reel Available Tape cost at no extra Devices/Reel 10, 20, 50, 100, 200, 500 500, 1000 Reel Size 7” 13” Electrical Specifications MULTIPLICATION FACTOR Outline Drawing 2 FREQUENCY (MHz) INPUT POWER (dBm) F1 F2 Input Output 10-500 20-1000 CONVERSION LOSS (dB) Min. Max. 4 10 Typ. Max. 11.4 14.5 *HARMONIC OUTPUT (dBc) F1 F3 Typ. Min. 45 20 F4 Typ. Min. 45 25 Typ. Min. 22 12 * Harmonics of input frequency below the power level of F2 Typical Performance Data INPUT RF= 4 dBm Input Frequency (MHz) PCB Land Pattern Suggested Layout, Tolerance to be within ± � .002 Conversion Loss (dB) F2 F1 INPUT RF= 10 dBm Harmonic Output Below F2 (-dBc) F3 F4 Conversion Loss (dB) F2 F1 Harmonic Output Below F2 (-dBc) F3 F4 10.00 60.00 100.00 150.00 200.00 11.14 45.65 50.28 15.24 11.14 48.90 66.44 15.25 11.22 45.52 65.65 15.06 11.22 43.05 59.50 14.95 11.31 40.43 53.67 15.06 11.61 54.24 65.09 21.97 11.94 50.38 65.74 21.45 11.70 46.86 61.85 20.36 11.67 43.30 55.49 20.72 11.67 41.16 50.45 22.99 250.00 300.00 350.00 400.00 450.00 500.00 11.23 37.72 49.84 15.65 11.15 36.08 47.09 16.63 11.09 34.61 45.52 18.06 10.99 32.56 42.50 19.34 11.16 31.45 43.20 20.09 11.41 29.56 43.75 20.71 11.72 38.29 47.40 25.43 11.69 36.49 44.07 30.03 11.88 34.46 41.61 31.49 11.97 33.87 39.61 36.48 12.21 32.85 39.01 25.48 12.72 33.56 39.13 25.56 C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .112 2.84 F .055 1.40 G .100 2.54 wt grams 0.20 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) AMK-2-13+ CONVERSION LOSS 15 INPUT RF=4 dBm INPUT RF=10 dBm 14 AMK-2-13+ HARMONIC OUTPUT F1 70 HARMONIC OUTPUT (-dBc) B .310 7.87 CONVERSION LOSS (dB) Outline Dimensions ( inch mm ) A .272 6.91 13 12 11 10 INPUT RF=4 dBm 60 INPUT RF=10 dBm 50 40 30 20 0 200 400 600 800 1000 0 100 OUTPUT FREQUENCY (MHz) AMK-2-13+ HARMONIC OUTPUT F3 300 400 500 AMK-2-13+ HARMONIC OUTPUT F4 60 INPUT RF=4 dBm INPUT RF=10 dBm 50 70 HARMONIC OUTPUT (-dBc) HARMONIC OUTPUT (-dBc) 80 200 F1 FREQUENCY (MHz) 60 40 50 30 40 20 INPUT RF=4 dBm INPUT RF=10 dBm 30 10 20 0 300 600 900 1200 1500 0 0 F3 FREQUENCY (MHz) 500 1000 1500 F4 FREQUENCY(MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com 2000 REV.A M151107 AMK-2-13+ ED-11679/1 DJ/CP/AM 150527