BFCN-152W-75+

Ceramic Bandpass Filter 75Ω BFCN-152W-75+ 950 to 1970 MHz Features • Wideband, 950-1970 MHz • Low loss, 1.9 dB typ. • Small size, 1206 (3.2mm x 1.6mm) • Temperature stable • LTCC construction Generic photo used for illustration purposes only CASE STYLE: FV1206-7 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications and Reel Available Tape st at no extra co • CATV/MOCA • Harmonic Rejection • Transmitters / receivers Reel Size 7” Electrical Specifications1,2 at 25°C Specification Definition INSERTION LOSS (dB) Parameter DC F3 F1 F2 F4 FREQUENCY (MHz) Devices/Reel 20, 50, 100, 200, 500,1000, 3000 F5 F# Frequency (MHz) Pass Band Center Frequency Insertion Loss VSWR — F1 - F2 F1 - F2 Stop Band, Lower Insertion Loss DC - F3 Stop Band, Upper Insertion Loss F4 - F5 950 - 1970 950 - 1970 DC - 470 470 - 630 630 - 730 2300 - 2500 2500 - 3000 Min. Typ. — — 38 50 — 18 — 1460 1.9 1.6 44 60 22 22 20 Max. Unit MHz dB :1 2.5 — — — — — — dB dB 1. Measured on Mini-Circuits Characterization Test Board TB-812+. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. Functional Schematic Maximum Ratings Operating Temperature Storage Temperature* RF Power Input** -55°C to +100°C -55°C to +100°C 1W at 25°C * 12 months max. **Passband rating, derate linearly to 0.5W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. BFCN-152W-75+ INSERTION LOSS (Full Band) BFCN-152W-75+ INSERTION LOSS (Pass Band) Top View 2 20 40 60 80 1 0.0 INSERTION LOSS (dB) INSERTION LOSS (dB) 0 3 0 500 1000 1500 2000 2500 1.0 2.0 3.0 4.0 3000 FREQUENCY (MHz) 900 1100 1300 1500 1700 1900 2100 FREQUENCY (MHz) BFCN-152W-75+ VSWR 2.0 VSWR 1.8 Pad Connections Input Output Ground 1.6 1.4 1.2 1 3 2 1.0 900 1100 1300 1500 1700 1900 2100 Notes FREQUENCY (MHz) A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 ED-16419/32 BFCN-152W-75+ MY/CP/AM 190726 Page 1 of 2 BFCN-152W-75+ Bandpass Filter Full Band Performance Frequency (MHz) Insertion Loss (dB) 10 100 470 630 690 730 790 810 1200 1970 2050 2300 2500 2800 3000 64.84 47.86 70.01 64.47 40.38 26.32 7.63 5.17 1.01 1.64 2.83 27.57 28.16 21.71 25.87 Pass Band Performance VSWR (:1) Frequency (MHz) 162.19 361.27 76.30 27.45 16.60 10.08 2.27 1.80 1.24 1.42 1.36 9.19 19.37 31.77 34.97 900 950 980 1100 1200 1300 1400 1500 1600 1700 1800 1900 1970 2000 2050 Insertion Loss (dB) 2.39 1.91 1.72 1.22 1.01 0.88 0.82 0.82 0.88 0.99 1.12 1.32 1.64 1.91 2.83 VSWR (:1) 1.23 1.41 1.41 1.27 1.24 1.23 1.23 1.32 1.44 1.55 1.58 1.52 1.42 1.38 1.36 Pad Connections Input Output Ground 1 Demo Board MCL P/N: TB-812+ Suggested PCB Layout (PL-439) 3 2 Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .126 3.20 B .063 1.60 C .051 1.30 E .051 1.30 F .014 0.36 G .183 4.65 H .104 2.64 J .051 1.30 M .063 1.60 N .014 0.36 P .024 0.61 Q .020 0.51 R wt .039 grams 0.99 .020 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2