BFCN-7350+

LTCC Bandpass Filter 50Ω BFCN-7350+ 7150 to 7550 MHz The Big Deal CASE STYLE: FV1206-4 • Small size 3.2mm x 1.6mm • Pass band (7150-7550 MHz) • Low Insertion Loss (1.8 dB typical) • Sharp rejection peaks close to stop band Product Overview The BFCN-7350+ LTCC Band Pass Filter is constructed with 5 layers in order to achieve a miniature size and high repeatability of performance. Wrap-around terminations minimize variations in performance due to parasitics. Covering 7350 MHz ±200 MHz, these units offer low insertion loss and good rejection at the band reject edges. Key Features Feature Advantages Small Size (3.20mm x1.6 mm) Allows for high layout density of circuit boards, while minimizing affects of parasitics. Rejection peaks close to pass band Provides good rejection of signals close to the pass band, for improved system performance. Wrap around termination Provides excellent solderability and easy visual inspection capability. LTCC construction Provides a rugged package that is well suited for tough environments including high humidity and high temperature extremes. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 2 Ceramic Bandpass Filter 50Ω BFCN-7350+ 7150 to 7550 MHz Maximum Ratings Features Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* 2W max. at 25°C *Passband rating, derate linearly to 0.5W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN 1 RF OUT 3 • Small size • Temperature stable • Hermetically sealed • LTCC construction Generic photo used for illustration purposes only CASE STYLE: FV1206-4 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • Harmonic Rejection • Transmitters / Receivers Reel Size 7” GROUND 2,4 Product Marking: 43 Electrical Specifications1,2 at 25°C Outline Drawing Parameter Pass Band Stop Band, Lower Center Frequency Insertion Loss VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit — F1-F2 F1-F2 — 7150-7550 7150-7550 — — — 7350 1.8 1.3 — 3.5 MHz dB :1 DC-F3 DC-F3 DC-6325 DC-6325 — — 15 30 — — dB :1 Insertion Loss VSWR F4-F5 8700-14000 — 15 — dB F4-F5 8700-14000 — 30 — :1 1. Measured on Mini-Circuits Characterization Test Board TB-518+. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. Stop Band, Upper (ON TOP) and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000 (ON TOP) Typical Frequency Response ATTENUATION (dB) Functional Schematic PCB Land Pattern DC Suggested Layout, Tolerance to be within ±.002 F3 F1 F2 F4 FREQUENCY (MHz) Typical Performance Data at 25°C Outline Dimensions ( B .063 1.60 C .037 0.94 D .026 0.66 E .075 1.91 F .012 0.30 G .182 4.62 K .119 3.02 L .041 1.04 M .039 0.99 N .013 0.33 P .024 0.61 Q .020 0.51 R .039 0.99 inch mm H .104 2.64 ) J .069 1.75 wt grams .020 Demo Board MCL P/N: TB-518+ Suggested PCB Layout (PL-305) Insertion Loss (dB) VSWR (:1) 100.00 800.00 1500.00 2550.00 5000.00 46.71 28.74 23.56 19.77 17.29 1737.18 579.06 217.15 102.19 34.75 6050.00 6750.00 7100.00 7300.00 8000.00 21.72 7.32 1.84 1.81 6.33 42.38 32.79 5.72 1.96 4.24 9000.00 10050.00 12050.00 13050.00 14050.00 24.85 14.90 17.49 20.61 20.66 22.58 23.49 10.02 7.70 6.76 3.0 50 2.5 2.0 40 1.5 7150 7250 7350 7450 7550 30 20 10 0 0 BFCN-7350+ INSERTION LOSS 40 BFCN-7350+ INSERTION LOSS 60 INSERTION LOSS (dB) Frequency (MHz) A .126 3.20 F5 2000 4000 6000 8000 10000 12000 14000 FREQUENCY (MHz) BFCN-7350+ VSWR 10000 3.0 2.0 30 1.0 7150 VSWR INSERTION LOSS (dB) 4.0 20 7250 7350 7450 7550 100 10 0 6300 1 6780 7260 7740 FREQUENCY (MHz) 8220 8700 0 2000 4000 6000 8000 10000 12000 14000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. D M151107 BFCN-7350+ ED-13661/5 AD/CP/AM 190725 Page 2 of 2