BFCQ-1162+

CERAMIC Bandpass Filter 50Ω BFCQ-1162+ 10.7 to 12.7 GHz THE BIG DEAL y Standard small 1008 (2.5mm x 2.0mm) case style y Low Insertion Loss – Mid band 1.3 dB typical y Wide rejection band y Shielded construction preventing filter from de-tuning y Reduced footprint area by employing LGA (land grid array) y Surface mountable pick and place standard case style Generic photo used for illustration purposes only CASE STYLE: NL1008C-7 APPLICATIONS y Satellite Communications PRODUCT OVERVIEW The BFCQ-1162+ LTCC Band Pass Filter achieves a miniature size and high repeatability of performance by utilizing a proprietary LTCC material system and distributed filter topology. The typical passband loss at 10.7 – 12.7 GHz is as low as 1.3 dB, with typical stopband rejections at 40 dB up to 27 GHz. This model handles up to 1W RF input power, and provides a wide operating temperature range from -55 to +125°C. Utilizing a proprietary LTCC material system and a distributed filter topology, this filter is able to achieve repeatable performance on a lot-to-lot basis. KEY FEATURES Feature Advantages Cost effective LTCC is scalable technology that is cost effective due to ease of production in high quantities. Small size (2.5mm x 2.0mm) Allows for high layout density of circuit boards, while minimizing effects of parasitics. Surface Mountable Suitable for very high volume automated assembly process. REV. A ECO-015831 BFCQ-1162+ CG/CP/AM 221118 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 4 CERAMIC Bandpass Filter 50Ω BFCQ-1162+ 10.7 to 12.7 GHz ELECTRICAL SPECIFICATIONS1 AT 25°C F# Frequency (MHz) Min. Typ. Max. Units Center Frequency — — — 11.6 — GHz Insertion Loss F1-F2 10.7 - 12.7 — 1.3 3.0 dB Return Loss F1-F2 10.7 - 12.7 — 13.0 — dB 0.1 - 7.0 40 46 — Insertion Loss DC-F3 7.0 - 8.8 20 40 — 15.1 - 17.0 25 38 — 17.0 - 27.0 35 40 — Parameter Passband Stop Band, Lower Stop Band, Upper Insertion Loss dB F4-F5 dB 1. Measured on Mini-Circuits Test Board TB-BFCQ-1162C+ with connectors and feedline de-embedded with 2xThru. MAXIMUM RATINGS Operating temperature -55°C to +125°C Storage temperature -55°C to +125°C RF Power Input TYPICAL FREQUENCY RESPONSE Ratings FREQUENCY (MHz) DC F3 F1 F2 F4 F5 INSERTION LOSS (dB) Parameter 1W max. Permanent damage may occur if any of these limits are exceeded. FUNCTIONAL SCHEMATIC RF IN www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com RF OUT PAGE 2 OF 4 CERAMIC Bandpass Filter 50Ω BFCQ-1162+ 10.7 to 12.7 GHz PAD CONNECTIONS INPUT 1 OUTPUT 2 GROUND 3 OUTLINE DRAWING PRODUCT MARKING: UA DEMO BOARD MCL P/N: TB-BFCQ-1162C+ SUGGESTED PCB LAYOUT (PL-707) OUTLINE DIMENSIONS (Inches mm ) A .098 2.49 B .079 2.01 C .028 0.71 D .012 0.30 E .024 0.61 F .024 0.61 G .008 0.20 H .028 0.71 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com J .043 1.09 K wt .024 grams .019 0.61 PAGE 3 OF 4 CERAMIC Bandpass Filter 50Ω BFCQ-1162+ 10.7 to 12.7 GHz TYPICAL PERFORMANCE DATA AT 25°C Frequency (MHz) Insertion Loss (dB) Return Loss (dB) 10 79.96 0.02 1000 72.99 0.00 2000 67.82 0.02 3000 65.21 0.01 4000 65.11 0.00 7000 53.68 0.05 8800 52.98 0.46 9200 29.94 0.70 10200 1.49 22.55 10700 1.04 22.26 11600 0.95 22.45 12700 1.21 18.86 15100 44.00 0.33 17000 40.93 0.20 20000 44.75 0.16 22000 45.29 0.22 27000 44.39 0.03 30000 24.44 0.23 32000 45.53 0.41 36000 34.07 0.32 40000 15.37 1.00 BFCQ-1162+ INSERTION LOSS 0 INSERTION LOSS (dB) INSERTION LOSS (dB) 0 20 40 60 80 100 0 10000 20000 30000 1 2 3 4 5 10000 40000 11000 12000 13000 FREQUENCY (MHz) FREQUENCY (MHz) BFCQ-1162+ RETURN LOSS 0 RETURN LOSS (dB) BFCQ-1162+ INSERTION LOSS (Zoomed) 20 40 0 10000 20000 30000 FREQUENCY (MHz) 40000 NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/terms/viewterm.html www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 4 OF 4