BFCW-542+

Ceramic Bandpass Filter 50Ω BFCW-542+ 4700 to 6000 MHz Features • Wide passband, 4700-6000 MHz • Low loss, 1.3 dB typ. • Small size 0603(1.6 x 0.8 mm ) • Temperature stable • LTCC construction CASE STYLE:JC0603C-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications and Reel Available Tape st at no extra co • Wireless communication (ISM) • Harmonic Rejection • Transmitters / receivers Reel Size 7” Electrical Specifications1,2 at 25°C Specification Definition Parameter INSERTION LOSS (dB) DC F3 F1 F2 F4 FREQUENCY (MHz) F5 Functional Schematic Devices/Reel 20, 50, 100, 200, 500,1000, 4000 F# Frequency (MHz) Min. Typ. Max. Unit 4700 - 6000 4700 - 6000 — — 5350 1.3 1.5 1.8 2.0 MHz dB :1 DC - F3 DC - 2500 30 34 — dB F4 - F5 9800 - 12000 26 34 — dB Pass Band Center Frequency Insertion Loss VSWR — F1 - F2 F1 - F2 Stop Band, Lower Insertion Loss Stop Band, Upper Insertion Loss 1. Measured on Mini-Circuits Characterization Test Board TB-720+. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. Maximum Ratings Operating Temperature Storage Temperature* RF Power Input** -55°C to +100°C -55°C to +100°C 1W at 25°C * 12 months max. **Passband rating, derate linearly to 0.5W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. BFCW-542+ INSERTION LOSS (Pass Band) BFCW-542+ INSERTION LOSS (Full Band) Top View 0.0 INSERTION LOSS (dB) INSERTION LOSS (dB) 0 20 40 60 80 0 3000 6000 9000 12000 FREQUENCY (MHz) 1.0 2.0 3.0 4.0 4700 5025 5350 5675 6000 FREQUENCY (MHz) BFCW-542+ VSWR 2.0 VSWR 1.8 Pad Connections Input Output Ground 1.6 1.4 1.2 1 3 2,4 1.0 4700 5025 5350 5675 6000 Notes FREQUENCY (MHz) A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 ED-16419/31 BFCW-542+ MY/CP/AM 150601 Page 1 of 2 BFCW-542+ Bandpass Filter Full Band Performance Frequency (MHz) Insertion Loss (dB) 10 100 500 1000 2500 3300 4200 4700 5000 6000 6800 8000 9800 11000 12000 77.28 57.45 44.18 38.54 39.92 21.56 3.47 1.35 1.16 1.34 3.36 28.56 33.73 36.32 37.56 Pass Band Performance VSWR (:1) 508.40 289.52 127.06 85.51 55.73 31.19 2.94 1.35 1.28 1.13 2.06 17.19 23.08 20.32 25.90 Frequency (MHz) 4500 4600 4700 4800 4900 5000 5100 5200 5400 5500 5600 5700 5800 5900 6000 Insertion Loss (dB) 1.74 1.51 1.35 1.26 1.19 1.16 1.14 1.12 1.12 1.13 1.15 1.18 1.21 1.26 1.34 VSWR (:1) 1.61 1.45 1.35 1.29 1.27 1.28 1.29 1.30 1.32 1.31 1.30 1.26 1.22 1.14 1.13 Pad Connections Input Output Ground 1 3 2,4 Demo Board MCL P/N: TB-720+ Suggested PCB Layout (PL-412) Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .063 1.60 B .031 0.79 C .024 0.61 D .018 0.46 E .028 0.71 F .006 0.15 G .012 0.30 K .032 0.81 L .028 0.71 M .012 0.30 N .049 1.24 P .026 0.66 Q .016 0.41 R .014 0.36 H .100 2.54 J .071 1.80 wt grams 0.005 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2