GALI-74+

Surface Mount Monolithic Amplifier Features • InGaP HBT IF and RF amplifier • Frequency range, DC to 1 GHz • High gain, 25.1 dB typ. at 0.1 GHz • Internally Matched to 50 Ohms • +19.2 dBm typ. output power at 0.1 GHz • High IP3, +38 dBm at 0.1 GHz • Low noise figure, 2.7 dB typ. • Unconditionally stable • Low thermal resistance • Transient protected • Aqueous washable • Protected by US patent, 6,943,629 DC-1 GHz Generic photo used for illustration purposes only Gali 74+ CASE STYLE: DF782 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • Cellular • Broadband • Communication receivers & transmitters General Description Gali 74+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot, and is enclosed in a SOT-89 package. It uses patented Transient Protected Darlington configuration and is fabricated using InGaP HBT technology. Expected MTTF is 500 years at 85°C case temperature. Gali 74+ is designed to be rugged for ESD and supply switch-on transients. simplified schematic and pin description RF-OUT and DC-IN RF IN 3 RF-OUT & DC-IN 4 2 GROUND 1 RF-IN GROUND Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”. GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E M151107 Gali-74+ ED-10887/6 MM/RS/CP/AM 200217 Page 1 of 4 Gali 74+ Monolithic InGaP HBT MMIC Amplifier Electrical Specifications at 25°C and 80mA, unless noted Parameter Min. Frequency Range* Typ. DC Gain Max. Units 1 GHz dB f=0.1 GHz — 25.1 — f=1 GHz 20 21.8 — f=2 GHz — 18.0 — f=3 GHz — 15.3 — f=4 GHz — 13.4 — Input Return Loss f= DC to 1 GHz 21 dB Output Return Loss f= DC to 1 GHz 12.5 dB Output Power @ 1 dB compression Output IP3 f=0.1 GHz 18 19.2 — f=0.5 GHz — 19 — f=1.0 GHz — 18.3 — f=0.1 GHz 38 f=0.5 GHz 37 f=1.0 GHz 33 dBm dBm Noise Figure 2.7 dB Recommended Device Operating Current 80 mA Device Operating Voltage 4.3 4.8 5.3 V Device Voltage Variation vs. Temperature at 80 mA -3.1 mV/°C Device Voltage Variation vs. Current at 25°C 2.8 mV/mA Thermal Resistance, junction-to-case1 120 °C/W *Guaranteed specification DC-1 GHz. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings Parameter Ratings Operating Temperature* -45°C to 85°C Storage Temperature -65°C to 150°C Operating Current 130mA Input Power 10dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1 Case is defined as ground leads. *Based on typical case temperature rise 6°C above ambient. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 4 Gali 74+ Monolithic InGaP HBT MMIC Amplifier Product Marking 4 74 1 2 3 Markings in addition to model number designation may appear for internal quality control purposes. Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Performance data, graphs, s-parameter data set (.zip file) Case Style: DF782 Plastic package, exposed paddle, lead finish: Matte-Tin Tape & Reel: F55 7” reels with 20, 50, 100, 200, 500, 1K devices. Suggested Layout for PCB Design: PL-019 Evaluation Board: TB-409-74+ Environmental Ratings: ENV08T2 Recommended Application Circuit R BIAS R bias (R equired) V cc Vcc “1%” Res. Values (ohms) for Optimum Biasing 7 8 9 10 11 12 13 14 15 28.7 41.2 53.6 66.5 78.7 90.9 102 115 127 C bypas s C block IN 4 Ibias R F C (Optional) 3 Vd 1 2 OUT C block Test Board includes case, connectors, and components (in bold) soldered to PCB Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 3 of 4 Gali 74+ Monolithic InGaP HBT MMIC Amplifier ESD Rating Human Body Model (HBM): Class 1C (1000v to < 2000v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100v to < 200v) in accordance with ANSI/ESD STM 5.2 - 1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C No. Test Required Condition Standard Quantity 1 Visual Inspection Low Power Microscope Magnification 40x MIP-IN-0003 (MCT spec) 45 units 2 Electrical Test Room Temperature SCD (MCL spec) 45 units 3 SAM Analysis Less than 10% growth in term of delamination J-Std-020C (Jedec Standard) 45 units 4 Moisture Sensitivity Level 1 Bake at 125°C for 24 hours Soak at 85°C/85%RH for 168 hours Reflow 3 cycles at 260°C peak J-Std-020C (Jedec Standard) 45 units MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 4 of 4