GP2S+

MMIC SURFACE MOUNT Power Splitter/Combiner 2 Way-0° 50Ω GP2S+ 800 to 2100 MHz FEATURES y Wide bandwidth, 800 to 2100 MHz y Excellent isolation, 24 dB typ. y Excellent amplitude unbalance, 0.02 dB typ. y Good phase unbalance, 0.8 deg. typ. y Small size, 0.118”x0.118”x0.035” y High ESD level y Aqueous washable Generic photo used for illustration purposes only CASE STYLE: DQ1225 APPLICATIONS y Cellular y GPS y DCS y WCDMA y GSM y Korea PCS ELECTRICAL SPECIFICATIONS AT 25°C Parameter Frequency (MHz) Frequency Range Min. Typ. 800 Max. Units 2100 MHz Insertion Loss* (above 3.0 dB) 800-2100 — 0.8 1.4 dB Isolation 800-2100 17 24 — dB Amplitude Unbalance 800-2100 — — 0.2 dB Phase Unbalance 800-2100 — — 4 deg. VSWR (Port S) 800-2100 1.2 VSWR (Ports 1,2) 800-2100 1.2 :1 * De-embedded from demo board loss. MAXIMUM RATINGS Parameter Operating temperature Storage temperature Power Input (as a splitter) Internal Dissipation ELECTRICAL SCHEMATIC Ratings -40°C to 85°C PORT 1 PORT S -65°C to 150°C PORT 2 1.5W max. 0.75W max. Permanent damage may occur if any of these limits are exceeded. REV. D ECO-015315 GP2S+ MCL NY 220829 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 3 MMIC SURFACE MOUNT Power Splitter/Combiner 2 Way-0° 50Ω 800 to 2100 MHz PAD CONNECTIONS OUTLINE DRAWING SUM PORT 2 PORT 1 7 PORT 2 9 GROUND GP2S+ PCB L 1,3,4,5,6,8,10,11,12, paddle DEMO BOARD MCL P/N: TB-453-GP2S+ SUGGESTED PCB LAYOUT (PL-282) Sugg Tolerance PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 OUTLINE DIMENSIONS ( Inch mm ) PRODUCT MARKING index MCL GP2S XXXX black body A .118 3.00 B .118 3.00 C .035 0.89 D .008 0.20 E .057 1.45 F .057 1.45 G .009 0.23 K .020 0.51 L .127 3.23 M .127 3.23 N .049 1.24 P .010 0.25 Q .020 0.51 R .049 1.24 H ----- J .016 0.41 wt grams 0.02 model family designation Marking may contain other features or characters for internal lot control TAPE & REEL INFORMATION: F66 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 MMIC SURFACE MOUNT Power Splitter/Combiner 2 Way-0° 50Ω GP2S+ 800 to 2100 MHz TYPICAL PERFORMANCE DATA AND CHARTS Total Loss1 (dB) Frequency (MHz) 790.00 880.00 980.00 1070.00 1170.00 1260.00 1360.00 1450.00 1550.00 1640.00 1740.00 1830.00 1930.00 2020.00 2120.00 S-1 S-2 Amplitude Unbalance (dB) 3.61 3.60 3.61 3.64 3.69 3.74 3.79 3.84 3.88 3.91 3.93 3.95 3.96 3.98 4.00 3.61 3.60 3.62 3.65 3.72 3.77 3.83 3.88 3.92 3.94 3.96 3.97 3.98 3.99 4.01 0.00 0.00 0.01 0.01 0.02 0.04 0.04 0.04 0.04 0.03 0.03 0.02 0.02 0.01 0.01 Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 22.30 29.08 33.32 26.49 22.70 21.01 20.20 20.24 21.14 22.91 26.76 34.69 32.63 24.55 19.78 0.49 0.52 0.57 0.66 0.72 0.78 0.83 0.87 0.91 0.97 1.05 1.16 1.28 1.41 1.57 1.21 1.12 1.07 1.10 1.16 1.22 1.27 1.30 1.32 1.30 1.27 1.22 1.15 1.08 1.04 1.17 1.14 1.11 1.09 1.06 1.04 1.05 1.07 1.10 1.14 1.17 1.20 1.22 1.24 1.24 1.16 1.12 1.09 1.07 1.04 1.02 1.03 1.05 1.08 1.11 1.14 1.17 1.19 1.21 1.22 1. Total Loss = Insertion Loss + 3dB splitter loss. GP2S+ ISOLATION GP2S+ TOTAL LOSS 50 S-1 4.3 S-2 ISOLATION (dB) TOTAL LOSS (dB) 4.5 4.1 3.9 3.7 3.5 800 1000 1200 1400 1600 1800 2000 40 30 20 10 2200 800 1000 1200 1400 1600 1800 2000 2200 FREQUENCY (MHz) FREQUENCY (MHz) GP2S+ VSWR 1.8 #S-VSWR #1-VSWR #2-VSWR VSWR 1.6 1.4 1.2 1.0 800 1000 1200 1400 1600 1800 2000 2200 FREQUENCY (MHz) ESD RATING Human Body Model (HBM): Class 1A (250 to < 500V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100V to < 250V) in accordance with ANSI/ESD STM 5.2 - 1999 NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/terms/viewterm.html www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3