HFCN-1150+

CERAMIC High Pass Filter 50Ω HFCN-1150+ 1220 to 4500 MHz THE BIG DEAL y Low cost y Small size y 7 sections y Temperature stable y DC block in/out, breakdown voltage, 1kV typ. y Excellent power handling, 7W y Hermetically sealed Generic photo used for illustration purposes only CASE STYLE: FV1206 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y Sub-harmonic rejection y Transmitters/receivers y Lab use PRODUCT OVERVIEW The HFCN-1150+ LTCC High Pass Filter is constructed with 12 layers in order to achieve a miniature size and high repeatability of performance. Wrap-around terminations minimize variations in performance due to parasitics. Covering 1220-4500 MHz, these units offer low insertion loss and good rejection. KEY FEATURES Feature Advantages Small Size (3.20mm x1.6 mm) Allows for high layout density of circuit boards, while minimizing affects of parasitics. Rejection peaks at harmonic frequencies Provides good rejection of signals at harmonic frequencies, for improved system performance. Wrap around termination Provides excellent solderability and easy visual inspection capability. LTCC construction Provides a rugged package that is well suited for tough environments including high humidity and high temperature extremes. REV. B ECO-011980 HFCN-1150+ AD/CP/AM 220221 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 4 CERAMIC High Pass Filter HFCN-1150+ ELECTRICAL SPECIFICATIONS 1,2 AT 25°C F# Frequency (MHz) Min. Typ. Max. DC-F1 DC-650 40 — — F1-F2 DC-850 20 — — Freq. Cut-Off F3 1150 — 3.0 — VSWR DC-F2 DC-850 — 20 — :1 F4-F7 1220-4500 — — 2.0 dB F5-F6 1320-3700 — — 1.4 dB F4-F7 1220-4500 — 2.0 — :1 Parameter Rejection Loss Stop Band Insertion Loss Pass Band VSWR Units dB dB 1. In Application where DC voltage is present at either input or output ports, coupling capacitors are required. 2. Measured on Mini-Circuits Characterization Test Board TB-270. MAXIMUM RATINGS TYPICAL FREQUENCY RESPONSE Ratings Operating temperature -55°C to +100°C Storage temperature -55°C to +100°C RF Power Input3 7W max.at 25°C 3. Passband rating, derate linearly to 3W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. ATTENUATION (dB) Parameter 40 20 3 2 1.3 DC F1 F2 F3 F4 F5 F6 F7 FREQUENCY FUNCTIONAL SCHEMATIC RF IN RF OUT www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 4 CERAMIC High Pass Filter HFCN-1150+ OUTLINE DRAWING PIN CONNECTIONS RF IN 1 RF OUT 3 GROUND (ON TOP) 2,4 (ON TOP) PRODUCT MARKING: N/A PCB Land Pattern DEMO BOARD MCL P/N: TB-270 SUGGESTED PCB LAYOUT (PL-137) Suggested Layout, Tolerance to be within ±.002 OUTLINE DIMENSIONS (Inches mm ) A .126 3.20 B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 G .169 4.29 H .087 2.21 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P wt .071 grams 1.80 .020 TAPE & REEL INFORMATION: F71 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 4 CERAMIC High Pass Filter HFCN-1150+ TYPICAL PERFORMANCE DATA AT 25°C Insertion Loss (dB) VSWR (:1) 10.0 97.78 1737.18 650.0 54.14 82.73 850.0 29.93 42.38 1150.0 3.39 2.91 1220.0 1.43 1.31 1300.0 1.01 1.23 3860.0 0.72 1.73 3940.0 0.79 1.82 4460.0 1.45 2.44 4520.0 1.49 2.66 HFCN-1150+ INSERTION LOSS 120 HFCN-1150+ VSWR 10000 100 1000 80 VSWR INSERTION LOSS (dB) Frequency (MHz) 60 40 100 10 20 1 0 0 500 1000 1500 2000 2500 3000 3500 4000 4500 FREQUENCY (MHz) 0 500 1000 1500 2000 2500 3000 3500 4000 4500 FREQUENCY (MHz) NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 4 OF 4