HFCN-3500+

Ceramic High Pass Filter 50Ω HFCN-3500+ 3900 to 9800 MHz Maximum Ratings Operating Temperature -55oC to 100oC Storage Temperature -55 C to 100 C o RF Power Input* o 7W max. at 25ºC *Passband rating, derate linearly to 3W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN 1 RF OUT 3 GROUND 2,4,5,6 Features Generic photo used for illustration purposes only • Low cost • Small size • 5 sections • Temperature stable • Excellent power handling, 7W • Hermetically sealed • LTCC construction • Protected by US Patent 7,760,485 CASE STYLE: FV1206-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500,1000, 3000 Reel Size 7” • Sub-harmonic rejection • Transmitters / receivers Electrical Specifications(1,2) at 25°C Outline Drawing STOPBAND (MHz) VSWR POWER NO. OF Typ. INPUT SECTIONS (W) Frequency (MHz) (Loss > 30dB) (Loss > 20dB) (Loss 3 dB) (Loss < 1.5dB) (Loss < 2dB) 1.5:1 Typ. Min. Typ. Max. Max. Stopband Max. (ON TOP) 2900 (ON TOP) fco, MHz Nom. 2800 3500 PASSBAND (MHz) 4000-8800 3900-9800 20:1 3650-9500 7 5 (1) In Application where DC voltage is present at either input or output ports, coupling capacitors are required. Alternatively, Mini-Circuits’ “D” suffix version of this model will provide>100 MOhm isolation to ground. (2) Measured on Mini-Circuits Characterization Test Board TB-285. electrical schematic typical frequency response AT T E NUAT ION PCB Land Pattern R F IN 40dB 3dB F co F R E QUE NC Y Suggested Layout, Tolerance to be within ±.002 Outline Dimensions (inch mm ) A .126 3.20 B .063 1.60 C .035 0.89 D .024 0.61 G .039 0.99 H .024 0.61 J .042 1.07 K .123 3.12 E .022 0.56 F .011 0.28 wt grams .020 Demo Board MCL P/N: TB-285 Suggested PCB Layout (PL-158) F 1.3dB Typical Performance Data at 25oC Frequency (MHz) Insertion Loss (dB) VSWR (:1) 50 400 1500 2800 2900 3050 59.26 41.60 38.09 35.62 38.74 24.44 1737.18 434.30 115.81 34.75 30.49 24.14 3250 3400 3500 3650 3900 4000 12.48 6.15 3.42 1.63 1.17 1.14 12.61 5.42 2.92 1.53 1.51 1.59 6000 8800 9500 9800 14000 0.71 0.74 1.36 1.41 2.60 1.06 1.23 1.48 1.87 1.49 HFCN-3500+ INSERTION LOSS 70 HFCN-3500+ VSWR 10000 60 1000 50 VSWR INSERTION LOSS(dB) R F OUT 20dB 40 30 20 100 10 10 0 0 3000 6000 9000 12000 FREQUENCY (MHz) 15000 1 0 3000 6000 9000 12000 15000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E M151107 EDR-8120/2 HFCN-3500+ RAV/CP/AM 150729page 1 of 1 Page 1 of 1 Ceramic High Pass Filter HFCN-3500+ Typical Performance Data INSERTION LOSS (dB) FREQ. (MHz) 50 100 200 500 1000 1500 2000 2500 2800 2850 2900 3000 3100 3200 3300 3400 3500 3650 3700 3900 4000 4500 5000 5500 6000 7000 8000 8800 9300 9500 9800 11000 12050 13000 14300 14600 16000 17000 18000 19000 20000 INPUT RETURN LOSS (dB) OUTPUT RETURNLOSS (dB) @ -55˚ C @ +25˚ C @ +100˚ C @ -55˚ C @ +25˚ C @ +100˚ C @ -55˚ C @ +25˚ C @ +100˚ C 59.91 53.31 47.47 39.77 35.91 37.56 52.98 32.40 34.36 36.84 39.48 31.05 22.70 16.41 11.15 6.88 3.73 1.53 1.27 0.98 0.93 0.76 0.61 0.56 0.57 0.50 0.42 0.44 1.21 0.96 1.21 1.62 2.19 2.56 4.56 9.11 10.19 5.35 8.88 9.64 11.33 60.08 53.23 47.26 39.85 35.96 37.96 49.79 32.26 35.48 38.30 38.50 28.37 20.92 15.06 10.09 6.16 3.41 1.63 1.40 1.18 1.13 0.93 0.77 0.73 0.74 0.71 0.62 0.76 1.15 1.29 1.30 2.11 2.69 2.29 5.68 10.48 10.02 7.24 9.66 10.28 11.76 58.78 52.94 47.04 39.83 36.12 38.36 47.86 32.25 36.63 38.86 35.95 26.19 19.38 13.86 9.18 5.57 3.17 1.69 1.51 1.31 1.26 1.08 0.92 0.91 0.88 0.90 0.79 1.09 1.32 1.56 1.45 2.42 3.11 2.51 6.73 11.53 9.85 8.98 11.31 11.63 10.86 0.03 0.04 0.03 0.04 0.01 0.07 0.19 0.29 0.32 0.40 0.41 0.46 0.57 0.81 1.27 2.47 4.96 12.17 14.62 14.21 13.21 13.76 19.17 26.53 39.85 24.07 23.33 20.66 21.47 15.29 10.58 7.16 6.28 5.81 6.50 3.64 3.34 7.10 5.94 6.72 2.43 0.02 0.03 0.01 0.01 0.05 0.14 0.27 0.38 0.44 0.52 0.55 0.62 0.76 1.09 1.71 3.23 6.16 13.49 15.34 13.69 12.85 13.97 18.90 27.15 34.15 24.40 28.95 19.30 19.00 14.70 10.61 6.69 5.87 7.72 6.40 4.15 4.24 6.57 4.87 4.50 3.08 0.02 0.03 0.00 0.02 0.09 0.19 0.33 0.45 0.52 0.61 0.65 0.74 0.93 1.35 2.17 4.02 7.37 14.91 16.33 13.76 12.91 13.82 18.30 25.99 35.48 25.80 30.21 18.08 17.46 13.92 10.78 6.75 5.64 8.50 6.24 4.60 4.60 6.62 4.90 3.56 4.06 0.01 0.02 0.01 0.03 0.00 0.07 0.14 0.29 0.42 0.43 0.43 0.53 0.63 0.94 1.50 2.85 5.75 15.91 22.33 15.90 14.06 13.80 18.43 22.43 27.43 23.44 23.70 19.25 12.44 13.09 9.84 7.46 6.49 5.61 5.20 3.38 6.05 9.90 4.22 2.43 1.77 0.01 0.01 0.01 0.00 0.05 0.13 0.23 0.39 0.56 0.59 0.59 0.73 0.88 1.29 2.04 3.76 7.31 20.02 27.80 15.01 13.52 13.98 18.39 23.92 25.54 23.22 37.59 18.15 14.82 13.90 10.52 6.87 6.03 7.71 5.79 4.29 4.80 6.07 4.47 3.59 2.42 0.01 0.01 0.02 0.02 0.08 0.17 0.26 0.45 0.66 0.70 0.71 0.88 1.09 1.62 2.57 4.68 8.83 24.94 30.47 14.66 13.34 13.76 18.05 23.45 25.15 23.17 29.16 15.93 15.22 13.43 11.24 6.86 5.57 7.88 5.61 5.33 4.90 4.37 3.49 4.40 4.19 REV. X1 HFCN-3500+ 080723 Page 1 of 1 Ceramic High Pass Filter HFCN-3500+ Typical Performance Curves INSERTION LOSS vs. TEMPERATURE 0 10 (dB) 20 30 40 -55°C @ Input Power = 0 dBm +25°C @ Input Power = 0 dBm 50 +100°C @ Input Power = 0 dBm 60 70 0 2000 4000 6000 8000 10000 12000 Frequency (MHz) 14000 16000 18000 20000 INPUT RETURN LOSS vs. TEMPERATURE 0 5 10 (dB) 15 20 -55°C @ Input Power = 0 dBm 25 +25°C @ Input Power = 0 dBm 30 +100°C @ Input Power = 0 dBm 35 40 0 2000 4000 6000 8000 10000 12000 Frequency (MHz) 14000 16000 18000 20000 OUTPUT RETURN LOSS vs. TEMPERATURE 0 5 10 (dB) 15 20 -55°C @ Input Power = 0 dBm 25 +25°C @ Input Power = 0 dBm 30 +100°C @ Input Power = 0 dBm 35 40 0 2000 4000 6000 8000 10000 12000 Frequency (MHz) 14000 16000 18000 20000 REV. X1 HFCN-3500+ 080723 Page 1 of 1 Case Style FV FV1206-1 Outline Dimensions PCB Land Pattern Suggested Layout, Tolerance to be within .002 CASE # A B C D E F G H J K L M N P WT. GRAM FV1206-1 .126 (3.20) .063 (1.60) .035 (0.89) .024 (0.61) .022 (0.56) .011 (0.28) .039 (0.99) .024 (0.61) .042 (1.07) .123 (3.12) --- --- --- --- .020 Dimensions are in inches (mm). Tolerances: 2 Pl. + .01; 3 Pl. + .005 Notes: 1. Open style, ceramic base. 2. Termination finish: as shown below or indicated on Data Sheet. For RoHS Case Styles: Tin plate over Nickel plate. All models, (+) suffix. For RoHS-5 Case Styles: Tin-Lead plate. All models, no (+) suffix. 98-FV Rev.: V (12/1118) M171394 File: 98-FV.docx This document and its contents are the property of Mini-Circuits. Sheet 2 of 8 Tape & Reel Packaging TR-F75 Applicable Case Styles FV1206-1 FV1206-3 Applicable Case Styles FV1206-4 FV1206-5 FV1206-6 FV1206-7 FV1206-9 JC0603C-1 Tape Width, mm Device Cavity Pitch, mm Reel Size, inches Devices per Reel Small quantity standards (see note) 20 50 100 8 4 7 200 500 1000 Standard 3000 Note: Please consult individual model data sheet to determine device per reel availability. Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: www.minicircuits.com/pages/pdfs/tape.pdf 98-TR-F75 Rev.: H (02/17/21) ECO-006427 File: 98-TR-F75.doc This document and its contents are the property of Mini-Circuits. Sheet 1 of 1 Mini-Circuits Environmental Specifications ENV06 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55° to 100°C Ambient Environment Individual Model Data Sheet Storage Temperature -55° to 100° C Ambient Environment Individual Model Data Sheet Humidity 90 to 95% RH, 240 hours, 50°C MIL-STD-202, Method 103, Condition A, Except 50°C and end-point electrical test done within 12 hours Solder Reflow Heat Sn-Pb Eutetic Process: 225°C peak Pb-Free Process 245° - 250°C peak J-STD-020, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Vibration (High Frequency) 20g peak, 10-2000 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-202, Method 204, Condition D Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A ENV06 Rev: A 02/25/11 M130240 File: ENV06.pdf This document and its contents are the property of Mini-Circuits. Page: 1