HSWA2-30DR+

SPDT RF SWITCH 50W DC-3000 MHz Absorptive RF Switch with internal driver. Single Supply Voltage , +3V Product Features • Very Low Insertion loss over entire frequency range • Super High Isolation over entire frequency range • High Input IP3, +55 dBm typ. • Single positive supply voltage, +3V • Very low DC current consumption, 8µA • Immune to latch up • Unique design-simultaneous switch off of RF1&RF2 HSWA2-30DR+ CASE STYLE: DG983-1 Typical Applications +RoHS Compliant • Base Station Infrastructure • Portable Wireless • CATV & DBS • MMDS & Wireless LAN RF • Band switch • Diplexer switches COMMON • Bypass switches The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications RF1 50Ω SW2 SW3 SW4 SW1 50Ω RF2 General Description 50Ω CONTROL The HSWA2-30DR+ is a 50Ω high isolation SPDT RF switch designed for wireless applications, covering DRIVER a broad frequency range from DC up to 3GHz with low insertion loss. The HSWA2-30DR+ operates on a single supply voltage +3V. See application note AN-80-006 for +5V supply voltage. This unit includes an internal CMOS control driver with two-pins control. The switchControl consumes very low 1 Control 2 supply current, 8 µA typ. The HSWA2-30DR+ switch is in a very small size and low profile package, 4x4mm and 0.9mm respectively. Functional Diagram RF COMMON 50Ω RF1 RF2 50Ω CONTROL 1 CONTROL 2 50Ω Internal Control Driver Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Rev. J M151108 HSWA2-30DR+ 161213 Page 1 of 11 HSWA2-30DR+ SPDT RF SWITCH RF Electrical Specifications, DC-3000 MHz, TAMB=25°C, VDD=+3V Parameter Condition DC Operating Frequency Insertion Loss Min. (note 4) Typ. 1 GHz 2 GHz 3 GHz (note 1) Max. Units 3000 MHz 1.0 1.2 1.4 dB 0.75 0.95 1.2 Isolation between Common port and RF1/RF2 ports 1 GHz 2 GHz 3 GHz 55 46 40 64 50 44 dB Isolation between RF1 and RF2 ports 1 GHz 2 GHz 3 GHz 57 54 40 63 60 48 dB Return Loss @ Common port 1 GHz 2 GHz 3 GHz 20 17 14 dB Return Loss @ RF1/RF2 ports 1 GHz 2 GHz 3 GHz 20 18 17 dB 5 MHz - 1000 MHz +80 dBm 10 MHz - 1000MHz 1000MHz - 3000MHz +55 +52 dBm +31 dBm Input IP2 Input IP3 (note 2) Input 1dB Compression (note 2,3) 1000 MHz +29 Notes: 1. I.LOSS values are de-embedded from test board Loss. 2. Device linearity degrades below 1 MHz. 3. Note absolute maximum ratings for input power. 4. Lowest Freq. determined by value of coupling capacitors at RF ports. DC Electrical Specifications Parameter Min. Typ. Max. 2.7 3 3.3 V — 8 20 µA Control Voltage Low 0 — 0.3xVdd V Control Voltage High 0.7xVdd — Vdd V Units Vdd, Supply Voltage (note 5) Supply Current (Vdd = 3V)(note 6) Units Note 5: See application note AN-80-006 for +5V supply voltage. Note 6: At Control Frequency of 1 kHz. Increases to 21 µA at 10 kHz and 56 µA at 50 kHz typically. Switching Specifications Parameter Switching Time, 50% CTRL to 90/10% RF Video Feedthrough, 5 MHz - 1000 MHz (note 7) Min. Typ. Max. — 2.0 — µSec — — 15 mVp-p Note 7: Measured with a 1 nSec risetime,0/3V pulse and 500 MHz bandwidth. Absolute Maximum Ratings Parameter Ratings Operating Temperature -40°C to 85°C Storage Temperature -65°C to 150°C Vdd, Supply Voltage -0.3V Min., 4V Max. Voltage control -0.3V Min., Vdd + 0.3V Max. ESD, HBM (ANSI/ESD STM 5.1 - 2001) 250V to < 500V (CLASS 1A) ESD, MM (ANSI/ESD STM 5.2 - 1999) RF input power: (note 8) 50V (CLASS M1) When the common port is connected to the RF port (RF1 or RF2) +33dBm When the RF port (RF1 or RF2) is not connected to the common port +24dBm When the common port is not connected to either RF1 or RF2 +24dBm Note 8: See Truth Table on page 3. Permanent damage may occur if any of these limits are exceeded. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 11 HSWA2-30DR+ SPDT RF SWITCH The RF switch control bits select the desired switch-state, as shown in Table 1: Truth Table. Table 1: Truth Table. STATE Control Input RF Input / Output RF1 Control 1 Control 2 RF1 to RF COMMON RF2 to RF COMMON 1 Low Low OFF OFF 2 Low High OFF 3 High 4 High RF SW2 Low High 50Ω SW3 ON ON OFF N/A N/A COMMON SW4 General notes: SW1 50Ω 1. When either of the RF1 or RF2 ports is closed (ON state), the closed port is connected to the RF Common port. RF2 the open port is connected to an internal 2. When either of the RF1 or RF2 ports is open (OFF state), 50Ω CONTROL 50Ω termination. 3. When both RF1 and RF2 ports are open (OFF state), the all threeDRIVER RF ports are connected to an internal 50Ω termination. Control 1 Control 2 EXAMPLE OF STATE 3 Functional Diagram RF COMMON 50Ω RF1 RF2 50Ω CONTROL 1 CONTROL 2 50Ω Internal Control Driver Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 3 of 11 HSWA2-30DR+ SPDT RF SWITCH 4 RF Ground GND 5 RF Ground GND 1 GND 6 RF Ground GND 2 GND 7 RF Ground RF COM 8 RF Common RF1 3 GND 9 RF Ground GND 4 GND 10 RF Ground GND 5 GND 11 RF Ground GND 12 RF Ground RF2 13 RF I/O GND 14 RF Ground GND 15 RF Ground Control 2 16 Control 2 Control 1 17 Control 1 GND 18 Supply Voltage Ground GND 19 Digital Ground VDD 20 Supply Voltage GND Paddle RF Ground Pad Control 2 RF I/O GND 16 RF Ground 3 Control 1 2 RF1 17 GND GND RF Ground 18 1 GND GND 19 Pin Number VDD Function 20 Pin Configuration (Top View) Pin Description Description 7 8 9 10 GND RF COM GND GND (note 1) 6 (note 1) 2x2mm Paddle ground GND (note 1) 15 GND GND 14 GND GND 13 RF2 RF1 12 GND GND 11 GND GND LE 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com C2 17 GND 18 9 4 VDD GND 8 3 PUP2 N/C 2x2mm Paddle ground 7 2 PUP1 RFin 6 1 VDD C16 19 C0.5 20 2. The exposed solder pad on the bottom of the package (See Pin Configuration) must be grounded for proper device operation C1 (note 2) Notes: 1. RF pins 3, 8 and 13 must be at 0 VDC. The RF pins do not require DC blocking capacitors for proper operation if the 0 VDC requirement is met. Page 4 of 11 HSWA2-30DR+ SPDT RF SWITCH Typical Performance Curves over various states. For switch state see Truth Table 1 on page 3. INSERTION LOSS Vs. FREQUENCY @ +25°C INSERTION LOSS Vs. FREQUENCY 2.5 2.5 STATE 3 STATE 2 2 INSERTION LOSS (dB) INSERTION LOSS (dB) 2 1.5 1 1.5 1 0.5 0.5 0 0 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 0 4000 ISOLATION BETWEEN RF1/RF2 TO RF COM Vs. FREQUENCY 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 120 +85°C +25°C -40°C STATE 2 & 3 110 100 100 90 90 80 70 60 +85°C +25°C -40°C STATE 1 110 ISOLATION (dB) ISOLATION (dB) 500 ISOLATION BETWEEN RF1/RF2 TO RF COM Vs. FREQUENCY 120 80 70 60 50 50 40 40 30 30 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 0 4000 500 ISOLATION BETWEEN RF1 TO RF2 Vs. FREQUENCY 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 ISOLATION BETWEEN RF1 TO RF2 Vs. FREQUENCY 140 110 +85°C +25°C -40°C STATE 2 & 3 +85°C +25°C -40°C STATE 1 120 ISOLATION (dB) 90 ISOLATION (dB) +85°C +25°C -40°C STATE 3 70 50 100 80 60 30 40 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 5 of 11 HSWA2-30DR+ SPDT RF SWITCH Typical Performance Curves over various states. For switch state see Truth Table 1 on page 3. RF COM RETURN LOSS Vs. FREQUENCY @ +25°C 26 26 24 24 22 22 RETURN LOSS (dB) RETURN LOSS (dB) RF RETURN LOSS Vs. FREQUENCY @ +25°C 20 18 16 14 12 10 18 16 14 12 STATE 1 RF1 RF COM. RF2 20 STATE 3 STATE 2 10 8 8 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 0 26 26 24 24 22 22 20 18 16 14 12 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 RETURN LOSS (dB) RETURN LOSS (dB) 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 3500 4000 RF COM RETURN LOSS Vs. FREQUENCY 18 22 20 18 500 4000 STATE 2 & 3 +85°C +25°C -40°C 0 24 0 3500 8 4000 20 14 3000 14 26 +85°C +25°C -40°C 2500 16 RF1 RETURN LOSS Vs. FREQUENCY 16 2000 FREQUENCY (MHz) 18 10 8 0 1500 20 12 STATE 3 +85°C +25°C -40°C 10 1000 RF COM RETURN LOSS Vs. FREQUENCY RETURN LOSS (dB) RETURN LOSS (dB) RF1 RETURN LOSS Vs. FREQUENCY 500 16 14 12 10 STATE 1 STATE 1 +85°C +25°C -40°C 8 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 6 of 11 HSWA2-30DR+ SPDT RF SWITCH Typical Performance Curves over various states. For switch state see Truth Table 1 on page 3. RF2 RETURN LOSS Vs. FREQUENCY RF2 RETURN LOSS Vs. FREQUENCY 26 26 24 24 RETURN LOSS (dB) RETURN LOSS (dB) 22 22 20 18 20 18 16 14 12 16 +85°C +25°C -40°C STATE 1 +85°C +25°C -40°C 10 14 8 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 0 500 60 60 58 58 56 56 54 54 52 50 48 46 44 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 3000 3500 4000 52 50 48 46 44 +85°C +25°C -40°C STATE 3 42 1000 INPUT IP3 Vs. FREQUENCY IP3 @ INPUT (dBm) IP3 @ INPUT (dBm) INPUT IP3 Vs. FREQUENCY +85°C +25°C -40°C 42 40 STATE 2 40 0 500 1000 1500 2000 2500 FREQUENCY (MHz) 3000 3500 4000 0 POWER IN @ 1dB COMPRESSION Vs. FREQUENCY 35 35 34 34 33 33 32 31 30 29 28 27 +85°C +25°C -40°C STATE 3 26 500 1000 1500 2000 2500 FREQUENCY (MHz) POWER IN @ 1dB COMPRESSION Vs. FREQUENCY P.IN @ 1dB COMP. (dBm) P.IN @ 1dB COMP. (dBm) STATE 2 32 31 30 29 28 27 +85°C +25°C -40°C 26 STATE 2 25 25 0 200 400 600 FREQUENCY (MHz) 800 1000 0 200 400 600 FREQUENCY (MHz) 800 1000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 7 of 11 HSWA2-30DR+ SPDT RF SWITCH Outline Drawing (DG983-1) PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Device Marking Pin 1 Index MCL HSWA2 + Outline Dimensions (inch mm ) A B C D E F G H J K L M N P Q R .157 .157 .035 .008 .081 .081 .010 — .022 .020 .177 .177 .081 .010 .032 .081 4.00 4.00 0.90 0.20 2.06 2.06 0.25 — 0.56 0.50 4.50 4.50 2.06 0.25 0.81 2.06 WT. GRAMS .04 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 8 of 11 HSWA2-30DR+ SPDT RF SWITCH Suggested Layout for PCB Design (PL-206) Recommended layout for PCB design The amount of vias surrounding the device in the suggested PCB layout are critical for obtaining the specified isolation performance for the device shown in the datasheet. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 9 of 11 HSWA2-30DR+ SPDT RF SWITCH TB-347 Evaluation Board Schematic Diagram Bill of Materials DESCRIPTION N# Qty N3 Capacitor Tantalum 1206 1µF +/-10% 1 N6 Capacitor X7R 0402 0.01µF +/-10% 1 N7 Capacitor Tantalum 1206 3.3µF +/-10% 1 N8, N9, N17 Capacitor 0603 NPO 100pF +/-5% 3 N11, N14 Resistor 0603 1 MOHM +/-1% 2 N12, N15 Resistor 0603 10 MOHM +/-1% 2 N10, N16 Resistor 0603 10 KOHM +/-1% 2 N5 LDO Voltage Regulator 3.3V MAX8878 1 N13 Dual Non-inverted Schmitt Trigger SN74LVC2G17 1 N1 Empty (location for HSWA2-30DR+) 1 N4 Empty 1 How to use evaluation Board TB-347 TB-347 The Evaluation board TB-347 was designed to evaluate the electrical performance of the HSWA2-30DR+ SPDT switch. RF3 and RF4 SMA 50Ω connectors are connected through a 50Ω transmission line that is used to estimate the evaluation board loss for de-embedding purposes. The transmission lines were designed using a coplanar waveguide with ground plane. For details, please see suggested PCB layout on Page 8. The number of vias surrounding the switch is critical for obtaining the specified isolation. The TB-347 operates from +2.7V to +6.5V applied to VDD connector. IC1 voltage regulator limits the supply voltage to the switch to +3.3V. IC2 is a Schmitt trigger & buffer which prevents an overload of switch control inputs from high level control signals (up to +5.5V) and prevents from noise and transient spikes during switching process. The control connector is used for computer control mode or manual operation mode. In manual control mode connect Control 1 and/or Control 2 to ground to set Control 1 and/or Control 2 to logic low, respectively. When jumpers are removed, the digital control input pulled up to VDD for logic high. For computer control mode the software & cable are supplied. The cable should be connected between computer LPT port and evaluation board control connector. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 10 of 11 HSWA2-30DR+ SPDT RF SWITCH Tape and Reel Packaging Information Table T&R TR No. No. of Devices Reel Size Small quantity standards 20, 50, 100, 200 7 inch F87 3000 (Standard) Tape Width Pitch 12 mm 8 mm 13 inch Unit Orientation Tape Cavity Direction of Feed Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 11 of 11