MMIC
SP2T RF Switch
HSWA2-63DR+
Absorptive RF Switch with internal driver
Single Supply Voltage, +2.7V to +5.5V
The Big Deal
• High Isolation, 69 dB at 1.0 GHz
• High Input IP3, +65 dBm
• Fast switching, 300 ns
• Tiny Size, 4x4mm
• Immune to latch-up
CASE STYLE: DG983-3
Product Overview
Mini-Circuits’ HSWA2-63DR+ is a MMIC SPDT absorptive switch with an internal driver designed for
wideband operation from 100 MHz to 6.0 GHz supporting many applications requiring high performance
across a wide frequency range. This model provides excellent isolation, fast switching speed and high
linearity in a tiny 4x4mm 20-Lead MCLP package. Produced using a unique CMOS process on silicon,
it offers the performance of GaAs with the advantages of conventional CMOS devices. HSWA2-63DR+
provides a high level of ESD protection and excellent repeatability.
Key Features
Feature
Advantages
Wideband, 100 MHz to 6.0 GHz
Usable over 1kHz to 6 GHz
One model can be used in many applications, saving component count. Also ideal for
wideband applications such as military and instrumentation.
With lower input power it can operate over 1kHz to 6 GHz covering even wider applications
Absorptive switch
In the off condition, RF output ports which are not switched ON are terminated into
50Ω. This enables proper impedance termination of the circuitry following the RF output ports, preventing any unintended action such as oscillation.
High Isolation:
• 71 dB at 1000 MHz
• 48 dB at 6000 MHz
High isolation significantly reduces leakage of power into OFF ports.
High linearity, +65 dBm IIP3
High linearity minimizes unwanted intermodulation products which are difficult or
impossible to filter in multi-carrier environments such as CATV, or in the presence of
strong interfering signal from adjacent circuitry or received by antenna.
Immune to Latch-up
Unlike conventional CMOS devices, HSWA is immune to latch-up
Tiny size, 4 x 4mm MCLP package
Tiny footprint saves space in dense layouts while providing low inductance, repeatable
transitions, and excellent thermal contact to the PCB.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 5
SP2T RF Switch
50Ω
100 MHz - 6 GHz
Absorptive RF Switch with internal driver
Single Supply Voltage, +2.7V to +5.5V
Product Features
• High Isolation, 69 dB typ. at 1 GHz
• Low insertion loss, 0.95 dB typ. at 1 GHz
• High Input IP3, 65 dBm typ.
• Fast switching time, 300 ns typ.
• Low current consumption, 120 µA typ.
• Wide bandwidth, 100-6000 MHz, usable over 1kHz-6000 MHz
• Immune to latch-up
Generic photo used for illustration purposes only
CASE STYLE: DG983-3
HSWA2-63DR+
+RoHS Compliant
Typical Applications
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• Defense
• Test and Measurements
• Switch matrices
General Description
HSWA2-63DR+ is a high isolation absorptive SPDT switch with integral CMOS driver, operates with single
positive supply voltage while consuming, 120 µA typical. It has been designed for very wide band operation. It is packaged in a 4mm x 4mm x0.9mm 20-lead MCLP package and is rated MSL3.
Simplified Schematic and Pad Description
Function
Pad
Number
RF COM
8
RF common/ SUM port*
RF1
3
RF out #1/In port #1*
Description
RF2
13
RF out #1/In port #2*
Control 1
17
CMOS Control IN #1
Control 2
16
CMOS Control IN #2
VDD
20
Supply voltage
GND
1.2,4-7,9,10-12
14,15,18,19
Ground
* Must be held at 0VDC. If required add DC blocking capacitors on these ports.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
REV. OR
M161605
HSWA2-63DR+
RS/CP
200922
Page 2 of 5
HSWA2-63DR+
SPDT RF Switch
RF Electrical Specifications1, 100 MHz - 6 GHz, TAMB=25°C, VDD= +3.0V, 50 Ohms
Parameter
Condition (MHz)
Min.
Typ.
Max.
Units
0.95
6000
1.15
MHz
100 - 1000
100
—
1000 - 2000
—
0.95
1.15
2000 - 3000
—
1.0
1.2
3000 - 4000
—
1.15
1.35
4000 - 5000
—
1.25
1.55
5000 - 6000
—
1.60
1.90
100 - 1000
69
71
—
1000 - 2000
65
67
—
2000 - 3000
63
68
—
3000 - 4000
62
67
—
4000 - 5000
52
57
—
5000 - 6000
44
48
Frequency range
Insertion loss2
Isolation between Common port and RF1/RF2 Ports
Isolation between RF1 and RF2 Ports
Return loss (All Ports)
100 - 1000
67
69
—
1000 - 2000
63
64
—
2000 - 3000
59
62
—
3000 - 4000
60
64
—
4000 - 5000
54
60
—
5000 - 6000
44
50
dB
dB
dB
100 - 4000
—
20
—
4000 - 5000
—
15
—
dB
5000 - 6000
—
13
Input IP2
100 - 6000
—
110
—
dBm
Input IP3
100 - 6000
60
65
—
dBm
1.0 dB Input compression3
100 - 6000
33
35
—
Thermal Resistance, junction-to-ambient
dBm
78
°C/W
DC Electrical Specifications
Parameter
Min.
Supply voltage, VDD
Typ.
Max.
2.7
Supply current
120
Units
5.5
V
200
µA
V
Control voltage Low
-0.3
0.6
Control voltage High
1.17
3.6
V
12
µA
Control current
9
Notes:
1. Tested on Mini-Circuits’ test board TB-919+, using Agilent’s N5230A network analyzer (see Characterization test circuit, Fig.2).
2. Insertion loss values are de-embedded from test board loss.
3. Do not exceed RF input power as shown in Absolute Maximum Ratings table.
Switching Specifications
Condition
Switching time
50% control to 90/10%RF
Video feed-through
Rise/Fall time
10 to 90% or 90 to 10%
fctrl=1KHz
VDD=3V
Vctrl High=1.8V
Vctrl Low=0V
Min.
Typ.
Max.
Units
—
300
400
nS
—
27
—
mVP-P
—
67
—
ns
Power Rating
35
30
25
dBm
Parameter
20
P1dB
15
Max Input operating
10
5
0
0.001
0.010
0.100
1.000
10.000
100.000
1,000.000 10,000.000
MHz
Figure 1. P1dB and Max Input Operating Power vs. Frequency
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 3 of 5
HSWA2-63DR+
SPDT RF Switch
Absolute Maximum Ratings4
Parameter
Ratings
Operating temperature
-40°C to +105°C
Storage temperature
-65°C to 150°C
VDD, Supply voltage
-0.3 to 5.5V
Voltage control
-0.3V Min. 3.6 Max.
RF Input power, CW5
+30 dBm
RF Power into output ports5
+20 dBm
Maximum Die Junction Temperature
150°C
4. Operation of this device above any of these conditions may cause permanent damage.
5. 100% Duty Cycle, all band, 50Ω
Truth Table
State of Control voltage
Control 1
Control 2
Mode
RF COM-RF1 ON
HIGH
LOW
RF COM-RF2 ON
LOW
HIGH
ALL OFF
LOW
LOW
Unsupported
HIGH
HIGH
Characterization / Application Test Circuit
Figure 2. Block Diagram of test Circuit used for characterization
(DUT soldered on Mini-Circuits’ TB-919+)
Note: Cblock is required only when DC is present on RF ports.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 4 of 5
HSWA2-63DR+
SPDT RF Switch
Product Marking
20
1
MCL
H63DR
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click
Performance Data
here
Data Table
Swept Graphs
Case Style
DG983-3 Plastic package, exposed paddle
Tape & Reel
F87
Standard quantities available on reel
7” reels with 20, 50, 100, 200, 500, 1000 & 3000 devices
Suggested Layout for PCB Design
PL-510
Evaluation Board
TB-919+
Environmental Ratings
ENV83
Termination finish: NiPdAu
ESD Rating
Human Body Model (HBM): Class 2 (Pass 2000V) in accordance with MIL-STD-883, Method 3015
MSL Rating
Moisture Sensitivity: MSL3 in accordance with IPC/JEDEC J-STD-020D
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 5 of 5
