JCPS-8-10+

Surface Mount Power Splitter/Combiner 8 Way-0° 50Ω 5 to 1000 MHz Features Maximum Ratings Operating Temperature Storage Temperature -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation 0.5W max. 0.875W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections SUM PORT 1 PORT 1 3 PORT 2 4 PORT 3 5 PORT 4 6 • CATV • VHF/UHF 9 PORT 7 11 fL-fU PORT 8 12 5-1000 ISOLATION (dB) INSERTION LOSS (dB) ABOVE 9.0 dB M U L M U L M U L M U Typ. Min Typ. Min Typ. Max. Typ. Max. Typ. Max. Max. Max. Max. Max. Max. Max. 0.5 1.2 1.8 5 10 15 1.0 0.7 1.3 34 20 22 16 20 Suggested Layout, Tolerance to be within ±.002 G .100 2.54 2.2 3.0 U = upper range [fU/2 to fU] S-2 S-3 S-4 S-6 Isolation (dB) S-8 1-2 1-7 VSWR VSWR VSWR S 1 8 3-4 6-7 9.32 9.52 9.50 9.68 9.66 9.81 9.32 9.50 9.47 9.65 9.63 9.77 9.36 9.55 9.52 9.69 9.68 9.81 9.41 9.58 9.55 9.72 9.72 9.85 9.44 9.61 9.58 9.74 9.74 9.88 0.48 0.45 0.45 0.45 0.44 35.93 37.70 36.05 34.15 32.59 42.85 44.59 45.09 44.62 44.23 41.38 44.75 39.23 35.64 33.28 44.66 44.72 42.45 39.66 37.44 1.06 1.05 1.06 1.07 1.08 1.29 1.26 1.24 1.24 1.24 1.37 1.33 1.32 1.31 1.31 100.00 9.49 9.66 9.62 9.78 9.77 9.92 200.00 9.68 9.83 9.77 9.92 9.89 10.04 300.00 9.87 10.01 9.92 10.06 9.99 10.13 400.00 10.09 10.19 10.08 10.19 10.09 10.24 500.00 10.25 10.35 10.22 10.32 10.21 10.37 0.42 0.36 0.36 0.39 0.40 30.78 26.77 24.36 22.64 21.29 43.90 43.17 43.56 43.75 41.70 30.81 26.11 23.70 22.22 21.25 35.03 30.42 28.36 27.44 26.98 1.09 1.13 1.16 1.20 1.26 1.23 1.21 1.20 1.19 1.17 1.30 1.26 1.23 1.19 1.15 0.41 0.39 0.56 0.76 0.88 20.26 19.65 19.47 19.61 19.89 38.51 35.63 33.44 31.84 30.86 20.65 20.44 20.50 20.60 20.42 26.76 26.89 27.74 29.88 34.76 1.31 1.31 1.28 1.24 1.22 1.15 1.13 1.11 1.11 1.11 1.12 1.09 1.06 1.06 1.10 10.39 10.50 10.39 10.50 10.39 10.57 10.44 10.58 10.51 10.65 10.60 10.77 10.43 10.60 10.62 10.79 10.80 10.99 10.41 10.62 10.71 10.93 10.99 11.17 10.46 10.69 10.88 11.12 11.17 11.34 1. Total Loss = Insertion Loss + 9dB splitter loss. JCPS-8-10 TOTAL LOSS S-1 11.0 50 S-8 10.6 10.2 9.8 9.4 40 35 30 25 20 15 ISO 1-2(dB) 10 9.0 0 200 400 600 FREQUENCY(MHz) 800 1000 JCPS-8-10 VSWR 1.4 JCPS-8-10 ISOLATION 45 ISOLATION (dB) wt grams 4.0 Demo Board MCL P/N: TB-134 Suggested PCB Layout (PL-037) S-1 5.00 10.00 30.00 50.00 70.00 Amplitude Unbalance (dB) Total Loss1 (dB) 11.4 TOTALLOSS (dB) L .890 22.61 F .100 2.54 600.00 700.00 800.00 900.00 1000.00 Outline Dimensions ( inch mm ) K .065 1.65 1.5 Typical Performance Data PCB Land Pattern J .065 1.65 15 M = mid range [10 fL to fU/2] Freq. (MHz) H .047 1.19 AMPLITUDE UNBALANCE (dB) L Outline Drawing E .250 6.35 PHASE UNBALANCE (Degrees) Typ. Min GROUND 2,7,8,13,14 L = low range [fL to 10 fL] D .100 2.54 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Electrical Specifications FREQ. RANGE (MHz) 10 C --- CASE STYLE: BG291 Applications PORT 6 B .800 20.32 Generic photo used for illustration purposes only • wideband frequency, 5 to 1000 MHz • excellent input matching, VSWR 1.35 typ. • excellent output matching, VSWR 1.25 typ. • shielded metal case • J-leads for good solderability & strain relief • aqueous washable • protected under U.S Patent 6,963,255 PORT 5 A .870 22.10 JCPS-8-10+ 0 200 ISO 1-7(dB) 400 600 ISO 3-4(dB) 800 1000 FREQUENCY (MHz) electrical schematic VSWR 1.3 1.2 1.1 #S-VSWR #1-VSWR 1.0 0 200 400 600 800 1000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. F M151107 ED-9392/1 JCPS-8-10+ WZ/TD/CP/AM 200427