JPS-2-1W+

Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω 3 to 750 MHz Maximum Ratings Operating Temperature Storage Temperature Features -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation 1W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. • low insertion loss, 0.4 dB typ. • excellent insertion loss flatness, 0.2 dB peak to peak typ. • excellent amplitude unbalance, 0.05 dB typ. • very good phase unbalance, 0.1 deg. typ. • excellent VSWR, 1.1:1 typ. all ports. • J-leads for excellent solderability and strain relief SUM PORT 1 PORT 1 3 PORT 2 4 GROUND 6 NOT USED 2,5 FREQ. RANGE (MHz) ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB M U L Min Typ. Min Typ. Min Typ. Max. Typ. Max. Typ. Max. 3-750 36 20 28 17 19 16 0.5 H .047 1.19 J .065 1.65 K .065 1.65 L .300 7.62 E .225 5.72 F .055 1.40 G .100 2.54 1.0 M = mid range [10 fL to fU/2] 0.4 1.0 0.9 AMPLITUDE UNBALANCE (dB) L M U L M U Max. Max. Max. Max. Max. Max. 1.0 2.0 4.0 0.2 0.3 0.4 1.4 U= upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) Outline Dimensions ( inch mm ) U Typ. PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 M PHASE UNBALANCE (Degrees) fL-fU L = low range [fL to 10 fL] D .100 2.54 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Electrical Specifications Outline Drawing C --- CASE STYLE: BH292 • UHF/VHF • instrumentation • communications systems L B .310 7.87 Generic photo used for illustration purposes only Applications Pin Connections A .280 7.11 JPS-2-1W+ Total Loss (dB) 1 S-1 Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-2 3.00 5.00 10.00 22.00 40.00 3.57 3.57 3.46 3.46 3.38 3.38 3.36 3.36 3.38 3.39 0.00 0.00 0.00 0.00 0.01 31.30 35.31 37.17 36.06 34.66 0.00 0.01 0.02 0.06 0.08 1.13 1.11 1.11 1.10 1.11 1.35 1.29 1.24 1.23 1.22 1.35 1.29 1.24 1.23 1.22 100.00 250.00 375.00 440.00 500.00 3.38 3.53 3.63 3.66 3.73 3.38 3.52 3.61 3.63 3.68 0.00 0.01 0.03 0.03 0.06 30.08 23.73 21.42 20.84 20.52 0.27 0.49 0.73 0.85 0.84 1.12 1.17 1.20 1.21 1.21 1.22 1.22 1.21 1.20 1.19 1.22 1.22 1.21 1.21 1.20 560.00 620.00 660.00 700.00 750.00 3.77 3.79 3.86 3.87 3.93 3.70 3.70 3.73 3.73 3.77 0.07 0.09 0.13 0.14 0.16 20.46 20.69 21.04 21.60 22.58 0.93 0.88 0.90 0.89 0.83 1.21 1.20 1.18 1.17 1.14 1.18 1.17 1.17 1.16 1.16 1.18 1.17 1.16 1.15 1.13 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.45 4.4 S-1(dB) 4.2 S-2(dB) 4.0 3.8 3.6 3.4 3.2 3.0 0 150 300 450 JPS-2-1W ISOLATION 40 ISOLATION (dB) TOTAL LOSS (dB) Demo Board MCL P/N: TB-48+ Suggested PCB Layout (PL-035) JPS-2-1W TOTAL LOSS 600 750 FREQUENCY (MHz) 35 30 25 20 0 150 300 450 600 750 FREQUENCY (MHz) JPS-2-1W VSWR 1.5 #S-VSWR 1.4 #1-VSWR electrical schematic #2-VSWR VSWR 1.3 1.2 1.1 1.0 0 150 300 450 600 750 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E ECO-006036 JPS-2-1W+ ED-8013/1 DY/TD/CP/AM 210202 Page 1 of 1