LFCG-612+

Ceramic Low Pass Filter 50Ω LFCG-612+ 4900 to 6100 MHz Features Generic photo used for illustration purposes only • Low loss, 1 dB typ. • Small size 0805 (2.0 x 1.25 mm) • Temperature stable • LTCC construction CASE STYLE: GE0805C-4 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Reel Size 7” • ISM band filtering • Harmonic Rejection • C band transmitters / receivers • Lab use Electrical Specifications1,2 at 25°C Parameter ATTENUATION (dB) Specification Definition 40 Pass Band Insertion Loss Freq. cut-off VSWR Stop Band Rejection Loss 20 1 2 3 1 DC F0 F1 F2 F3 F4 F5 FREQUENCY F6 Functional Schematic and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 4000 F# Frequency (MHz) F0 - F1 F2 F0- F1 F3 F4 - F5 F6 4900 - 6100 7500 4900 - 6100 8200 9800 - 12200 14700 - 18300 Min. Typ. Max. Unit — — — 33 25 1.0 3.0 1.7 20 40 33 1.2 — — — — — dB dB :1 dB dB dB In Application where DC voltage is present at either input or output port, coupling capacitors are required. Measured on Mini-Circuits Characterization Test Board TB-799+ Maximum Ratings Operating Temperature Storage Temperature RF Power Input* -55°C to +100°C -55°C to +100°C 1W at 25°C *Passband rating, derate linearly to 0.5W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. Typical Performance Data at 25°C R F IN R F OUT Insertion Loss (dB) 10 200 600 1000 3000 4900 6100 7500 8200 9800 12200 14700 16000 17000 18300 20000 8 4 1,2,3,5,6,7 VSWR (:1) 0.16 0.16 0.63 1.39 3.72 0.78 0.78 2.55 22.02 43.00 41.19 47.48 52.06 56.18 62.88 44.34 LFCG-612+ INSERTION LOSS 150 1.01 1.26 1.96 2.90 6.22 1.52 1.24 1.64 22.66 53.85 74.67 32.13 36.96 124.20 30.30 105.03 LFCG-612+ VSWR 120 60 VSWR Pad Connections 80 INSERTION LOSS (dB) Top View Input Output Ground Frequency (MHz) 40 20 90 60 30 0 0 0 5000 10000 15000 20000 0 5000 10000 15000 Notes FREQUENCY (MHz) A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. FREQUENCY (MHz) B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com 20000 REV. A M151107 LFCG-612+ ED-16419/26 MY/CP/AM 150813 Page 1 of 2 LFCG-612+ Low Pass Filter Demo Board MCL P/N: TB-799+ Suggested PCB Layout (PL-429) Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within±.002 Pad Connections Input Output Ground 8 4 1,2,3,5,6,7 Outline Dimensions ( inch mm ) A .079 2.01 B .049 1.24 C .027 0.69 D .014 0.36 E .012 0.30 H .025 0.64 J .134 3.40 K .110 2.80 L .014 0.36 M .039 0.99 F .012 0.30 G .026 0.66 wt grams .008 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2