LFCG-92+

Ceramic Low Pass Filter 50Ω LFCG-92+ DC1 to 990 MHz Features • Low loss, 0.4 dB typ. • Small size 0805 (2.0 x 1.25 mm) • Temperature stable • LTCC construction Generic photo used for illustration purposes only CASE STYLE: GE0805C-2 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications e and Reel Available Tapra cost at no ext • Harmonic Rejection • VHF/UHF transmitters / receivers • lab use Reel Size 7” Devices/Reel 20, 50, 100, 200, 500,1000, 4000 Electrical Specifications1,2 at 25°C Parameter ATTENUATION (dB) Specification Definition 40 Pass Band Insertion Loss Freq. cut-off VSWR Stop Band Rejection Loss 20 1 2 3 1 DC F6 F5 F1 F2 F3 F4 FREQUENCY Functional Schematic F# Frequency (MHz) Min. Typ. Max. Unit DC - F1 F2 DC - F1 F3 F4 - F5 F6 DC - 990 1400 DC - 990 1700 1800 - 2700 5000 — — — — 30 — 0.4 3.0 1.45 30 40 50 0.8 — — — — — dB dB :1 dB dB dB In Application where DC voltage is present at either input or output port, coupling capacitors are required. Measured on Mini-Circuits Characterization Test Board TB-800+ Maximum Ratings Operating Temperature Storage Temperature RF Power Input* -55°C to +100°C -55°C to +100°C 2W at 25°C *Passband rating, derate linearly to 1W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. Typical Performance Data at 25°C R F IN R F OUT Insertion Loss (dB) 10 20 100 500 700 990 1400 1500 1700 1800 2000 2500 2700 3000 3500 4000 5000 Pad Connections 8 4 1,3,5,7 2,6 INSERTION LOSS (dB) 70 VSWR (:1) 0.06 0.08 0.11 0.34 0.35 0.44 2.18 8.83 32.78 40.59 35.16 55.61 50.94 43.62 41.69 43.14 60.95 LFCG-92+ INSERTION LOSS 150 60 1.03 1.02 1.11 1.44 1.32 1.22 1.90 9.15 46.32 62.15 78.35 117.43 116.94 128.23 125.95 130.99 139.99 LFCG-92+ VSWR 120 50 40 VSWR Top View Input Output Ground Isolate (Do not ground) Frequency (MHz) 30 20 90 60 30 10 0 0 0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 Notes FREQUENCY A. Performance and quality attributes and conditions not expressly stated in this specification document(MHz) are intended to be excluded and do not form a part of this specification document. (MHz) B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria andFREQUENCY measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com 5000 REV. A M151107 ED-16419/27 LFCG-92+ MY/CP/AM 150813 Page 1 of 2 LFCG-92+ Low Pass Filter Demo Board MCL P/N: TB-800+ Suggested PCB Layout (PL-427) Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within .002 Pad Connections Input Output Ground Isolate (Do not ground) 8 4 1,3,5,7 2,6 Outline Dimensions ( inch mm ) A .079 2.01 B .049 1.24 C .037 0.94 D .014 0.36 E .012 0.30 H .025 0.64 J .134 3.40 K .104 2.64 L 0.014 0.36 M .039 0.99 F .012 0.30 G .026 0.66 wt grams .008 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2