MSWT-4-20

Surface Mount Switch 50Ω Transfer, Maximum Ratings Operating Temperature Storage Temperature MSWT-4-20+ MSWT-4-20 DC to 2.0 GHz Low Video Leakage Features • wideband, DC to 2.0 GHz • low video leakage, 15 mVp-p typ. • excellent VSWR, 1.2:1 typ. CASE STYLE: XX211 PRICE: $3.45 ea. QTY (10) -40°C to 85°C -55°C to 100°C Pin Connections Tx Rx J1 J2 CONTROL 1 CONTROL 2 CONTROL 3 CONTROL 4 2 6 4 8 1 3 5 7 Applications • transmitter/receiver • automatic test equipment + RoHS compliant in accordance with EU Directive (2002/95/EC) The +suffix identifies RoHS Compliance. See our web site for RoHS compliance methodologies and qualifications. Electrical Specifications FREQ. (GHz) DC-100 MHz INSERTION LOSS (dB) 100-500 MHz Typ. Max. 500-1000 MHz Typ. Max. 1000-2000 MHz Typ. Max. Path Typ. Max. Typ. 1dB COMPR. (dBm) DC-100 100-500 500-1000 1000-2000 MHz MHz MHz MHz Typ. Typ. Typ DC-100 MHz Typ. Min. ISOLATION (dB) 100-500 MHz Typ. Min. 500-1000 MHz Typ. 1000-2000 MHz Min Min. Typ. Outline Drawing fL DC fU Tx-J1/J2 2.0 J1/J2-Rx Tx-Rx 0.9 1.1 — 1.2 1.4 — 1.1 1.3 — 1.5 1.25 1.8 1.45 2.2 1.7 1.5 2.0 1.6 2.2 — — — —— 18 16 — 25 18 — 28 20 — 29 22 — 51 52 60 44 46 53 34 37 41 27 31 36 26 29 34 21 24 27 19 21 28 15 17 21 Additional Specifications Control Voltage Control Current, mA VSWR(:1) Rise/Fall time (10%-90%), ns Switching time, 50% of Control to 90% RF(Turn-on), ns 10% RF(Turn-off), ns **Video Leakage, mVp-p 0/-5V Control -8/0 for compression spec, -8 to -5/0 for all other specs 0.2 max to -8V, 0.02 max at 0 to -0.2V DC-.1GHz 1.2 typ. 1.65 max. .1-.5GHz 1.25 typ. 1.8 max. 2 typ. 4 typ 4 typ 15 typ. .5-1GHz 1.4 typ. 1.9 max. 1-2GHz 1.4 typ. 1.7 max. 1 Control Ports 2 3 4 "On" Path (other paths are "OFF") 0 -v -v -v 0 -v -v 0 -v -v -v 0 -v -v 0 -v 0 -v -v -v -v 0 -v 0 TX-J2 TX-J1 RX-J1 RX-J2 TX-J2 & RX-J1 TX-J1 & RX-J2 ** Video leakage or break through is defined as leakage of switching signal to RF output ports. 1. RF Power Input (dBm), Max. DC-100MHz 100-500 MHz 500-2000MHz • Steady State Control 0/-8V 24 27 33 • As a Modulator 12 17 23 2. Control Current, 500µA (occurs at -9V to -12V typ.) Application Note for MSWT-4-20 Transmit-Receive Switch: The functional schematic diagram for a diversity application of the switch is shown in Figure 1, with the required external components including 4 independent drivers at the control ports. When operation as a transfer switch is desired only 2 drivers are needed, one connected to the V1 and V3 ports together, and the other connected to the V2 and V4 ports. In either case, two DC return paths are needed for the control voltages, represented by the ground symbols in the diagram. These returns must be via oppositely situated RF ports (Tx and Rx or J1 and J2), and can be furnished incidentally by the user's RF terminating devices themselves. However, if those devices are AC-coupled (that is, they contain DC blocking capacitors), then the shunt resistors shown in the diagram are needed. The resistor should be installed either at the Tx and Rx ports (connection shown as solid), or at J1 and J2 (shown dotted), with equal effect. If one external RF device has a DC return to ground, for example, then only one resistor is needed; it must be installed at the opposite RF port of the switch. The resistance of each of the external DC returns should be 20K ohms or less, for proper ON/OFF FETs. Outline Dimensions ( inch) mm A .163 4.14 H .009 0.23 B .210 5.33 J .025 0.64 C .077 1.96 K .030 0.76 D .250 6.35 M .050 1.27 E .220 5.59 N .030 0.76 F .050 1.27 P .270 6.86 G .017 0.43 wt grams 0.10 Demo Board MCL P/N: TB-202 Suggested PCB Layout (PL-220) Distribution Centers NORTH AMERICA 800-654-7949 • 417-335-5935 • Fax 417-335-5945 • EUROPE 44-1252-832600 • Fax 44-1252-837010 Mini-Circuits ® INTERNET http://www.minicircuits.com P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 Mini-Circuits ISO 9001 & ISO 14001 Certified REV. B M102713 MSWT-4-20 WP/CP 060117 Page 1 of 2 MSWT-4-20+ MSWT-4-20 Typical Performance Data FREQ. (MHz) ON INSERTION LOSS (dB) (CTRL1 @-8V, CTRL2 @ 0V) (CTRL3 @-8V, CTRL4 @ 0V) TX-J1 RX-J2 AMPLITUDE UNBALANCE OFF INSERTION LOSS (dB) (CTRL1 @ 0V, CTRL2 @ -8V) (CTRL3 @ 0V, CTRL4 @ -8V) TX-J1 RX-J2 VSWR ON 1.00 8.49 23.49 38.48 60.98 98.46 210.93 308.39 503.33 623.29 750.75 930.69 1035.65 1245.58 1448.01 1552.98 1755.41 1860.38 1965.34 — x 0.77 0.77 0.82 0.84 0.86 0.87 0.98 1.04 1.04 1.12 1.21 1.19 1.38 1.36 1.44 1.35 1.39 1.51 1.47 σ 0.01 0.01 0.01 0.02 0.04 0.01 0.01 0.03 0.04 0.03 0.04 0.03 0.03 0.03 0.02 0.01 0.03 0.02 0.04 — x 1.03 1.04 1.07 1.08 1.09 1.08 1.20 1.29 1.28 1.35 1.46 1.44 1.62 1.55 1.61 1.60 1.63 1.71 1.67 σ 0.02 0.02 0.02 0.01 0.01 0.02 0.02 0.01 0.02 0.02 0.02 0.02 0.02 0.02 0.01 0.02 0.02 0.02 0.01 — x 0.27 0.27 0.25 0.24 0.23 0.21 0.22 0.25 0.25 0.25 0.25 0.28 0.26 0.22 0.24 0.28 0.24 0.22 0.22 σ 0.03 0.03 0.02 0.01 0.00 0.02 0.03 0.01 0.01 0.02 0.02 0.02 0.03 0.05 0.05 0.02 0.03 0.02 0.06 — x 98.89 81.64 68.21 64.34 58.77 52.85 43.69 40.09 34.58 32.82 31.17 29.33 28.25 25.64 24.70 23.72 22.32 21.60 21.50 σ 2.58 2.04 1.03 0.08 0.40 0.01 0.14 0.12 0.17 0.07 0.06 0.09 0.16 0.15 0.15 0.06 0.11 0.13 0.19 — x 92.52 73.58 64.25 59.52 55.31 50.90 43.46 40.29 34.09 32.54 30.89 28.45 27.42 24.47 22.92 22.75 22.09 20.95 20.84 TX-J1 σ 7.65 0.79 0.16 0.25 0.17 0.08 0.31 0.05 0.32 0.08 0.08 0.21 0.11 0.09 0.24 0.12 0.15 0.12 0.12 — x 1.18 1.18 1.18 1.18 1.18 1.18 1.19 1.19 1.23 1.28 1.34 1.44 1.47 1.47 1.40 1.35 1.25 1.22 1.23 RX- J2 — x 1.25 1.25 1.25 1.26 1.26 1.26 1.25 1.24 1.26 1.30 1.35 1.44 1.47 1.46 1.39 1.35 1.23 1.19 1.16 5.0 INSETION LOSS (dB) 4.0 3.0 2.0 1.0 0.0 at RF level of 0 dBm MSWT-4-20 INSERTION LOSS Tx-J1 Rx-J2 100 ISOLATION (dB) 80 60 40 20 0 at RF level of 0 dBm MSWT-4-20 ISOLATION Tx-J1 Rx-J2 0 400 800 1200 FREQUENCY (MHz) 1600 2000 0 400 800 1200 1600 2000 FREQUENCY (MHz) 2.0 1.8 VSWR 1.6 1.4 1.2 1.0 at RF level of 0 dBm MSWT-4-20 VSWR Tx-J1 Rx-J2 0 400 800 1200 1600 2000 FREQUENCY (MHz) Distribution Centers NORTH AMERICA 800-654-7949 • 417-335-5935 • Fax 417-335-5945 • EUROPE 44-1252-832600 • Fax 44-1252-837010 Mini-Circuits ® INTERNET http://www.minicircuits.com P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 Page 2 of 2 Mini-Circuits ISO 9001 & ISO 14001 Certified