MTX2-73+

MMIC BALUN RF Transformer MTX2-73+ 50Ω 2000 to 7000 MHz THE BIG DEAL y Wideband, 2000 to 7000 MHz y Low phase unbalance, 4 deg. and amplitude unbalance, 0.8 dB typ. y Miniature size, (3 x 3 x 0.89 mm) y Low cost y Aqueous washable Generic photo used for illustration purposes only CASE STYLE: DQ1225 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y WLAN y WiMAX/WIBRO y ISM y RADAR PRODUCT OVERVIEW Mini-Circuits MTX2-73+ is a wideband MMIC balun transformer with an impedance ratio of 2:1 covering a wide range of applications from 2000 to 7000 MHz. Fabricated using IPD process technology, this model provides outstanding repeatability with low insertion loss, low amplitude unbalance, low phase unbalance, and RF input power handling up to +34 dBm (2.5W). The unit comes housed in a tiny 3 x 3 x 0.89mm QFN package with low inductance, excellent thermal efficiency, and high ESD rating. Feature Advantages Wideband, 2000 to 7000 MHz MTX2-73+ supports a broad variety of applications including WLAN, WiMAX, WiBRO, ISM, radar and more. Low insertion loss • 0.6 dB, 2600 to 6000 MHz • 1.9 dB, 2000 to 7000 MHz Enables excellent signal power transmission from input to output. Low unbalance • 0.8 dB amplitude unbalance • 4° phase unbalance Low unbalance can improve a system’s electromagnetic compatibility by rejecting unwanted common-mode noise. Tiny size, 3 x 3 x 0.89 mm Accommodates tight space requirements for dense PCB layouts. REV. B ECO-009930 MTX2-73+ ED-150122/8 AG/CP/AM 210917 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 4 MMIC BALUN RF Transformer MTX2-73+ ELECTRICAL SPECIFICATIONS AT 25°C Parameter Frequency (MHz) Min. Impedance Ratio (secondary/primary) Typ. Max. Units 7000 MHz 2 Frequency Range 2000 Insertion Loss1 Amplitude Unbalance Phase Unbalance2 2600 - 6000 — 0.6 1.0 2000 - 7000 — 1.9 2.3 2600 - 6000 — 0.5 0.9 2000 - 7000 — 0.8 1.2 2600 - 6000 — 3 5 2000 - 7000 — 4 7 dB dB Degree 1. Insertion loss is referenced to mid-band loss, 1.5 dB. 2. Relative to 180° MAXIMUM RATINGS Parameter Operating Temperature Ratings -40°C to 85°C Storage Temperature -65°C to 150°C Input RF Power 34 dBm at 25°C Permanent damage may occur if any of these limits are exceeded. www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 4 MMIC BALUN RF Transformer CONFIGURATION J PAD CONNECTIONS NO CONNECTION* PRI MTX2-73+ SEC *Internal open circuit Function Pad Number PRIMARY DOT (Unbalanced Port) 2 SECONDARY DOT (Balanced) 9 SECONDARY (Balanced) 7 EXTERNAL GND 1,3,6,8 & paddle NO CONNECTION all other PRODUCT MARKING index over pin 1 MCL X273 black body model family designation Marking may contain other features or characters for internal lot control www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 4 MMIC BALUN RF Transformer MTX2-73+ ADDITIONAL DETAILED TECHNICAL INFORMATION IS AVAILABLE ON OUR DASH BOARD. TO ACCESS C LIC K HERE Data Table Performance Data Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DQ1225 Plastic package, exposed paddle lead finish: Matte-Tin Tape & Reel Standard quantities available on reel F66 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-482 Evaluation Board TB-MTX2-73+ Environmental Ratings ENV12 ESD RATING Human Body Model (HBM): Class 1B (500 to < 1000V) in accordance with ANSI/ESD STM 5.1 - 2001 MSL TEST FLOW CHART Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Finish NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 4 OF 4