NCS1-63+

CERAMIC BALUN RF Transformer 50Ω 4900 to 6000 MHz NCS1-63+ 1:1 Ratio FEATURES y Wideband, 4900 to 6000 MHz y Low phase unbalance, 5 deg. and amplitude unbalance, 0.3 dB typ. y Miniature size, 0.079”x0.049”x0.033” y LTCC construction y Low cost y Aqueous washable Generic photo used for illustration purposes only CASE STYLE: GE0805C-1 +RoHS Compliant APPLICATIONS y WLAN y WIMAX y 802.11 y Radar y ISM The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications ELECTRICAL SPECIFICATIONS AT 25°C Parameter Frequency (MHz) Min. Impedance Ratio Typ. Max. Units 1 Frequency Range 4900 6000 MHz Insertion Loss1 4900 - 6000 — 1.0 — dB Amplitude Unbalance 4900 - 6000 — 0.3 — dB Phase Unbalance2 4900 - 6000 — 5 — Degree 1. Insertion Loss is referenced to mid-band loss, 1.3 dB. Reference Demo Board TB-419+ 2. Relative to 180° MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature RF Power 3 CONFIGURATION R Ratings -40°C to 85°C -55°C to 100°C 3W 3. Derate linearly to 2W at 85°C Permanent damage may occur if any of these limits are exceeded. REV. E ECO-010109 NCS1-63+ MCL NY 211014 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 3 CERAMIC BALUN RF Transformer NCS1-63+ PAD CONNECTIONS OUTLINE DRAWING PRIMARY DOT (Unbalanced Port) 1 PRIMARY (GND) 2 SECONDARY DOT (Balanced) 4 SECONDARY (Balanced) 3 NO CONNECTION 6 NOT USED (GND Externally) 5 PCB Land Pattern INDEX AREA* Pads 2,3,4 are DC-connected internally Suggested L ayout, T olerance to be within ±.002 *Shape of index marking may vary PRODUCT MARKING: N/A DEMO BOARD MCL P/N: TB-419+ SUGGESTED PCB LAYOUT (PL-264) OUTLINE DIMENSIONS (Inches mm ) A .079 2.01 B .049 1.24 C .033 0.84 D .014 0.36 G .026 0.66 H .014 0.36 J .039 1.00 K .110 2.80 E .012 0.30 F .012 0.30 wt grams .008 TAPE & REEL INFORMATION: F74 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 CERAMIC BALUN RF Transformer NCS1-63+ 3 TYPICAL PERFORMANCE DATA Frequency (MHz) Insertion Loss (dB) Input Return Loss (dB) Amplitude Unbalance (dB) 4900 0.27 8.80 0.30 2.92 5000 0.19 9.34 0.16 2.19 5200 0.07 10.61 0.07 1.00 5300 0.04 11.32 0.13 0.55 5400 0.01 11.93 0.20 0.30 5500 0.01 12.34 0.30 0.08 Phase Unbalance (deg) 5600 0.03 12.33 0.41 0.21 5700 0.07 12.03 0.47 0.67 5900 0.19 10.72 0.57 2.31 6000 0.27 10.08 0.57 3.57 3. Measured with Agilent E5071B network analyzer using impedance conversion and port extension. NCS1-63+ AMPLITUDE UNBALANCE NCS1-63+ INSERTION LOSS 1.0 AMPLITUDE UNBALANCE (dB) INSERTION LOSS (dB) 0.6 0.4 0.2 0.0 4900 5100 5300 5500 5700 FREQUENCY (MHz) 5900 6100 0.8 0.6 0.4 0.2 0.0 4900 5100 5300 5500 5700 FREQUENCY (MHz) 5900 6100 NCS1-63+ PHASE UNBALANCE PHASE UNBALANCE (Deg) 6.0 5.0 4.0 3.0 2.0 1.0 0.0 4900 5100 5300 5500 5700 FREQUENCY (MHz) 5900 6100 NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3