NCS4-102+

CERAMIC BALUN RF Transformer 50Ω 700 to 1000 MHz NCS4-102+ 1:4 Ratio FEATURES y Wideband, 700 to 1000 MHz y Low phase unbalance, 5 deg and amplitude unbalance, 0.5 dB typ. y Miniature size, 0.079"x0.049"x0.033" y LTCC construction y Low cost y Aqueous washable Generic photo used for illustration purposes only CASE STYLE: GE0805C-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y LTE y Radar y Cellular ELECTRICAL SPECIFICATIONS1 AT 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio (Secondary/Primary) Max. Units 4 Frequency Range 700 1000 MHz Insertion Loss 700 - 1000 — 0.9 1.3 dB Amplitude Unbalance 700 - 1000 — 0.5 — dB Phase Unbalance2 700 - 1000 — 5 — Degree 1. Measured on Demo Board TB-628+ 2. Relative to 180° MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature RF Power Ratings CONFIGURATION J NO CONNECTION* PRI -40°C to 85°C -55°C to 100°C 2W SEC Permanent damage may occur if any of these limits are exceeded. *Internal open circuit REV. D ECO-010302 NCS4-102+ MCL NY 211025 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 3 CERAMIC BALUN RF Transformer NCS4-102+ PAD CONNECTIONS OUTLINE DRAWING PRIMARY DOT (Unbalanced Port) 1 PRIMARY (GND) 2 SECONDARY DOT (Balanced) 4 SECONDARY (Balanced) 6 NO CONNECTION (Isolate) 3 GND Externally 5 PCB Land Pattern INDEX AREA* Pads 2,4,5 are DC-connected internally. Suggested L ayout, T olerance to be within ±.002 *Shape of index marking may vary PRODUCT MARKING: N/A DEMO BOARD MCL P/N: TB-628+ SUGGESTED PCB LAYOUT (PL-354) OUTLINE DIMENSIONS (Inches mm ) A .079 2.01 B .049 1.24 C .033 0.84 D .014 0.36 G .026 0.66 H .014 0.36 J .039 1.00 K .110 2.80 E .012 0.30 F .012 0.30 wt grams .008 TAPE & REEL INFORMATION: F74 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 CERAMIC BALUN RF Transformer NCS4-102+ 3 TYPICAL PERFORMANCE DATA Frequency (MHz) Insertion Loss (dB) Input Return Loss (dB) Amplitude Unbalance (dB) 700 0.87 13.12 0.40 2.59 730 0.81 14.07 0.33 2.32 760 0.77 14.86 0.25 1.98 790 0.74 15.48 0.17 1.59 820 0.72 15.91 0.09 1.15 850 0.70 16.14 0.00 0.65 Phase Unbalance (deg) 880 0.70 16.15 0.09 0.09 910 0.69 16.01 0.17 0.52 940 0.70 15.76 0.26 1.17 1000 0.71 15.04 0.45 2.67 3. Measured with Agilent E5071B network analyzer using impedance conversion and port extension. NCS4-102+ INSERTION LOSS 1.0 0.8 0.6 0.4 0.2 700 750 950 1000 950 1000 0.6 0.4 0.2 0.0 700 750 800 850 900 FREQUENCY (MHz) 950 1000 NCS4-102+ PHASE UNBALANCE 6.0 PHASE UNBALANCE (Deg) 800 850 900 FREQUENCY (MHz) NCS4-102+ AMPLITUDE UNBALANCE 0.8 AMPLITUDE UNBALANCE (dB) INSERTION LOSS (dB) 1.2 5.0 4.0 3.0 2.0 1.0 0.0 700 750 800 850 900 FREQUENCY (MHz) NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3