NCS4-63+

CERAMIC BALUN RF Transformer 50Ω 4500 to 6000 MHz NCS4-63+ 1:4 Ratio FEATURES y Wideband, 4500 to 6000 MHz y Low phase unbalance, 5 deg and amplitude unbalance, 0.3 dB typ. y Miniature size, 0.079"x0.049"x0.033" y LTCC construction y Low cost y Aqueous washable Generic photo used for illustration purposes only CASE STYLE: GE0805C-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y WLAN y WIMAX y 802.11 y Radar ELECTRICAL SPECIFICATIONS1 AT 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio (Secondary/Primary) Max. Units 4 Frequency Range 4500 6000 MHz Insertion Loss1 4500 - 6000 — 1.0 — dB Amplitude Unbalance 4500 - 6000 — 0.5 — dB Phase Unbalance2 4500 - 6000 — 5 — Degree 1. Insertion Loss is referenced to mid-band loss, 0.7 dB. Reference Demo Board TB-419+ 2. Relative to 180° CONFIGURATION J MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature RF Power 3 Ratings NO CONNECTION* PRI -40°C to 85°C -55°C to 100°C 3W SEC 3. Derate linearly to 2W at 85ºC. Permanent damage may occur if any of these limits are exceeded. *Internal open circuit REV. D ECO-010302 NCS4-63+ MCL NY 211025 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 3 CERAMIC BALUN RF Transformer NCS4-63+ PAD CONNECTIONS PRIMARY DOT (Unbalanced Port) PRIMARY (GND) OUTLINE DRAWING 1 PCB Land Pattern 2,5 SECONDARY DOT (Balanced) 4 SECONDARY (Balanced) 3 NO CONNECTION 6 INDEX AREA* Pads 2,3,4,5 are DC-connected internally. Suggested L ayout, T olerance to be within ±.002 *Shape of index marking may vary PRODUCT MARKING: N/A DEMO BOARD MCL P/N: TB-419+ SUGGESTED PCB LAYOUT (PL-264) OUTLINE DIMENSIONS (Inches mm ) A .079 2.01 B .049 1.24 C .033 0.84 D .014 0.36 G .026 0.66 H .014 0.36 J .039 1.00 K .110 2.80 E .012 0.30 F .012 0.30 wt grams .008 TAPE & REEL INFORMATION: F74 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 CERAMIC BALUN RF Transformer NCS4-63+ 4 TYPICAL PERFORMANCE DATA Frequency (MHz) Insertion Loss (dB) Input Return Loss (dB) Amplitude Unbalance (dB) 4500 0.09 14.03 0.04 8.50 4600 0.07 14.78 0.02 8.30 4900 0.02 16.64 0.02 5.52 5000 0.01 17.28 0.03 4.60 5200 0.00 18.16 0.18 2.85 5400 0.02 19.21 0.32 2.16 Phase Unbalance (deg) 5600 0.06 19.53 0.30 1.25 5700 0.09 19.66 0.30 1.17 5800 0.12 19.00 0.22 0.35 6000 0.17 17.62 0.17 1.13 4. Measured with Agilent E5071B network analyzer using impedance conversion and port extension. NCS4-63+ INSERTION LOSS* 0.5 0.4 0.3 0.2 0.1 0.0 4500 4800 5700 6000 5700 6000 0.8 0.6 0.4 0.2 0.0 4500 4800 5100 5400 FREQUENCY (MHz) 5700 6000 NCS4-63+ PHASE UNBALANCE 12.0 PHASE UNBALANCE (Deg) 5100 5400 FREQUENCY (MHz) NCS4-63+ AMPLITUDE UNBALANCE 1.0 AMPLITUDE UNBALANCE (dB) INSERTION LOSS (dB) 0.6 10.0 8.0 6.0 4.0 2.0 0.0 4500 4800 5100 5400 FREQUENCY (MHz) NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3