QCN-8+

ULTRA-SMALL CERAMIC Power Splitter/Combiner 2 Way-90° 50Ω QCN-8+ 450 to 750 MHz FEATURES y Low insertion loss, 0.6 dB typ. y Wrap-around terminal for excellent solderability y Ultra small, 0.12"X0.06"X0.035" Generic photo used for illustration purposes only CASE STYLE: FV1206-1 APPLICATIONS y Balanced amplifiers y Modulators y UHF y Point to point radio ELECTRICAL SPECIFICATIONS AT 25°C Parameter Frequency (MHz) Frequency Range Min. Typ. 450 Insertion Loss, above 3.0 dB Isolation Phase Unbalance Amplitude Unbalance VSWR 750 MHz 0.6 0.9 470-700 0.5 0.8 450-750 13 16 470-700 13 16 dB dB 450-750 5 8 470-700 5 8 450-750 0.5 1.0 470-700 0.3 0.8 450-750 1.4 470-700 1.4 Degree dB (:1) ELECTRICAL SCHEMATIC Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C Power Input (as a splitter) Unit 450-750 MAXIMUM RATINGS Parameter Max. PORT 1 SUM PORT 15W* max. * Derate linearly to 7W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. PORT 2 50 Ohm www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. D ECO-010256 QCN-8+ ED-11876D/1 AD/TD/CP/AM 220929 PAGE 1 OF 3 ULTRA-SMALL CERAMIC Power Splitter/Combiner 2 Way-90° 50Ω 450 to 750 MHz OUTLINE DRAWING PIN CONNECTIONS SUM PORT 1 PORT 1 (0°) 4 PORT 2 (+90°) 6 GROUND QCN-8+ (ON TOP) 2,5 50 OHM TERM EXTERNAL 3 (ON TOP) PRODUCT MARKING: N/A PCB Land Pattern DEMO BOARD MCL P/N: TB-255 SUGGESTED PCB LAYOUT (PL-131) Suggested Layout, Tolerance to be within ±.002 OUTLINE DIMENSIONS (Inches mm ) A .126 3.20 B .063 1.60 C .035 0.89 D .024 0.61 G .039 0.99 H .024 0.61 J .042 1.07 K .123 3.12 E .022 0.56 F .011 0.28 wt grams .020 TAPE & REEL INFORMATION: F75 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 ULTRA-SMALL CERAMIC Power Splitter/Combiner 2 Way-90° 50Ω QCN-8+ 450 to 750 MHz TYPICAL PERFORMANCE DATA Total Loss1 (dB) Frequency (MHz) Amplitude Unbalance (dB) Isolation (dB) S-1 S-2 450.00 3.27 3.76 0.49 15.68 460.00 3.32 3.71 0.40 470.00 3.36 3.67 0.31 510.00 3.49 3.53 550.00 3.58 3.45 570.00 3.61 590.00 3.63 610.00 630.00 VSWR (:1) Phase Unbalance (deg.) S 1 2 85.22 1.41 1.41 1.38 15.70 85.29 1.40 1.41 1.38 15.72 85.37 1.40 1.41 1.37 0.04 15.84 85.66 1.39 1.40 1.36 0.13 15.95 86.00 1.37 1.40 1.36 3.43 0.18 16.01 86.18 1.37 1.40 1.36 3.42 0.20 16.07 86.37 1.36 1.40 1.36 3.63 3.43 0.20 16.12 86.62 1.36 1.40 1.36 3.62 3.46 0.17 16.16 86.85 1.36 1.40 1.37 650.00 3.60 3.50 0.11 16.18 87.12 1.36 1.41 1.38 670.00 3.57 3.56 0.01 16.19 87.43 1.37 1.41 1.39 690.00 3.53 3.64 0.11 16.19 87.77 1.37 1.43 1.40 710.00 3.48 3.74 0.27 16.17 88.15 1.38 1.44 1.42 730.00 3.41 3.87 0.46 16.13 88.60 1.40 1.46 1.45 750.00 3.33 4.03 0.70 16.07 89.12 1.41 1.48 1.48 1. Total Loss = Insertion Loss + 3 dB splitter loss. QCN-8+ TOTAL LOSS S-1 4.5 S-2 4.0 3.5 3.0 2.5 2.0 450 500 550 600 QCN-8+ ISOLATION 20 ISOLATION (dB) TOTAL LOSS(dB) 5.0 650 700 18 16 14 12 10 450 750 500 550 600 650 700 750 FREQUENCY (MHz) FREQUENCY (MHz) QCN-8+ PHASE UNBALANCE PHASE UNBALANCE (deg.) 90 88 86 84 450 500 550 600 650 700 750 FREQUENCY (MHz) NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/terms/viewterm.html www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3