RLP-158+

Metal Shield Low Pass Filter 50Ω RLP-158+ DC to 158 MHz Maximum Ratings Operating Temperature -40oC to 85oC Storage Temperature -55oC to 100oC RF Power Input 0.5W Max Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN RF OUT GROUND 2 6 1, 3, 4, 5, 7, 8 Features • high rejection • sharp insertion loss roll off • excellent VSWR, 1.1:1 typ.@ passband • aqueous washable Generic photo used for illustration purposes only CASE STYLE: GP731 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • wireless communications • receivers / transmitters Outline Drawing Reel Size 7” 13” Low Pass Filter Electrical Specifications (TAMB= 25OC) PCB Land Pattern PASSBAND (MHz) fco, MHz Nom. (Loss < 2dB) (Loss 3dB) (Loss > 20dB) (Loss > 40dB) Passband Typ. Stopband Typ. DC - 158 172 220 - 255 255 - 1000 1.1 20 STOPBAND (MHz) VSWR (:1) Typical Frequency Response Suggested Layout, Tolerance to be within ±.002 ATTENUATION, dBdB ATTENUATION, SOLDER RESIST B .350 8.89 C .100 2.54 D .175 4.45 K .050 1.27 L .040 1.02 M .195 4.95 N .390 9.91 E .075 1.91 P .120 3.05 F .100 2.54 Q .390 9.91 G .110 2.79 H .040 1.02 R .070 1.78 wt. grams 0.25 Note: Please refer to case style drawing for details Frequency (MHz) INSERTION LOSS (dB) RETURN LOSS (dB) 1 10 FREQUENCY (MHz) 100 1000 0.9 0.9 11 1.75 1.5 1.35 1.3 63 Typical Performance Data at 25oC RLP-158+ INSERTION LOSS 0 3 dB 12 dB FREQUENCY / Fco FREQUENCY / fCO Demo Board MCL P/N: TB-332 Suggested PCB Layout (PL-176) 100 90 80 70 60 50 40 30 20 10 0 20dB dB 20 dB 20 DC J .080 2.03 RF OUT RF IN Insertion Loss (dB) x σ Return Loss (dB) Frequency (MHz) Group Delay (nSec) 0.5 50.0 80.0 100.0 158.0 163.0 0.08 0.27 0.40 0.51 1.20 1.53 0.01 0.01 0.01 0.00 0.03 0.08 40.86 33.49 28.44 24.32 24.69 16.30 2.0 5.0 10.0 20.0 30.0 40.0 4.20 4.17 4.09 4.18 4.16 4.22 172.0 176.0 178.0 187.0 200.0 220.0 3.11 4.51 5.38 10.29 18.28 30.15 0.22 0.29 0.33 0.38 0.36 0.35 7.30 4.90 4.02 1.80 0.91 0.59 50.0 60.0 70.0 80.0 90.0 100.0 4.25 4.40 4.47 4.61 4.82 5.14 252.0 255.0 400.0 600.0 800.0 1000.0 49.89 52.12 81.37 77.30 73.42 71.29 0.55 0.66 4.89 5.44 3.94 4.00 0.42 0.42 0.22 0.16 0.13 0.16 110.0 120.0 135.0 145.0 158.0 160.0 5.32 5.77 6.78 7.62 9.76 10.19 RLP-158+ RETURN LOSS 50 45 40 35 30 25 20 15 10 5 0 RLP-158+ GROUP DELAY 12 GROUP DELAY (nSec) A .350 8.89 Functional Schematic 40dB dB 40 dB 40 METALLIZATION Outline Dimensions ( inch mm ) e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200 500,1000 11 10 9 8 7 6 5 4 3 0 1 10 FREQUENCY (MHz) 100 1000 0 20 40 60 80 100 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com 120 140 160 REV. C ECO-005139 EDR-8677U RLP-158+ URJ/RAV 201130 Page 1 of 1