RLP-70+

Metal Shield Low Pass Filter 50Ω RLP-70+ DC to 70 MHz Maximum Ratings Operating Temperature -40oC to 85oC Storage Temperature -55oC to 100oC RF Power Input 0.5W Max Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN RF OUT GROUND 2 6 1, 3, 4, 5, 7, 8 Features • high rejection • sharp insertion loss roll off • excellent VSWR, 1.1:1 typ.@ passband • aqueous washable Generic photo used for illustration purposes only CASE STYLE: GP731 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • wireless communications • receivers / transmitters Outline Drawing Reel Size 7” 13” Low Pass Filter Electrical Specifications (TAMB= 25OC) PCB Land Pattern PASSBAND (MHz) fco, MHz Nom. (Loss < 2dB) (Loss 3dB) (Loss > 20dB) (Loss > 40dB) Passband Typ. Stopband Typ. DC - 70 77 100 - 115 115 - 1000 1.1 20 STOPBAND (MHz) VSWR (:1) Typical Frequency Response Suggested Layout, Tolerance to be within ±.002 ATTENUATION, dBdB ATTENUATION, SOLDER RESIST Outline Dimensions ( inch mm ) C .100 2.54 D .175 4.45 K .050 1.27 L .040 1.02 M .195 4.95 N .390 9.91 E .075 1.91 P .120 3.05 F .100 2.54 Q .390 9.91 G .110 2.79 H .040 1.02 R .070 1.78 J .080 2.03 wt. grams 0.25 Note: Please refer to case style drawing for details 10 FREQUENCY (MHz) 100 1000 0.9 0.9 11 1.75 1.5 1.35 1.3 3 14 Typical Performance Data at 25oC Frequency (MHz) RETURN LOSS (dB) INSERTION LOSS (dB) 1 3 dB 12 dB FREQUENCY / Fco FREQUENCY / fCO RLP-70+ INSERTION LOSS 0 20dB dB 20 dB 20 DC Demo Board MCL P/N: TB-332 Suggested PCB Layout (PL-176) 100 90 80 70 60 50 40 30 20 10 0 RF OUT RF IN Insertion Loss (dB) x σ Return Loss (dB) Frequency (MHz) Group Delay (nSec) 0.5 30.0 50.0 70.0 74.0 77.0 0.26 0.46 0.73 1.44 1.96 2.86 0.01 0.00 0.01 0.03 0.07 0.13 29.63 26.01 34.05 26.46 16.38 10.21 2.0 4.0 10.0 16.0 20.0 26.0 8.88 8.73 8.72 8.84 8.98 9.24 80.0 84.0 86.0 92.0 100.0 110.0 4.64 8.66 11.14 19.15 29.98 44.80 0.23 0.34 0.36 0.38 0.41 0.63 5.93 2.87 2.12 1.17 0.81 0.64 30.0 36.0 40.0 46.0 50.0 56.0 9.48 9.88 10.24 10.90 11.51 12.70 115.0 200.0 400.0 600.0 800.0 1000.0 54.65 75.92 76.19 84.79 78.30 58.09 1.12 2.39 1.55 4.15 3.25 0.60 0.58 0.26 0.12 0.09 0.13 0.14 60.0 66.0 70.0 76.0 77.0 80.0 13.75 16.08 18.62 24.82 25.65 26.75 RLP-70+ RETURN LOSS 50 45 40 35 30 25 20 15 10 5 0 GROUP DELAY (nSec) B .350 8.89 Functional Schematic 40dB dB 40 dB 40 METALLIZATION A .350 8.89 e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200 500,1000 0 1 10 FREQUENCY (MHz) 100 1000 RLP-70+ GROUP DELAY 28 26 24 22 20 18 16 14 12 10 8 0 10 20 30 40 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com 50 FREQUENCY (MHz) 60 70 80 REV. C ECO-005139 EDR-8672U RLP-70+ URJ/RAV 201201 Page 1 of 1