SEPS-2-33+

DC Pass Power Splitter/Combiner 2 Way-0° 50Ω 600 to 3000 MHz Maximum Ratings Operating Temperature Storage Temperature Features -55°C to 100°C Internal Dissipation DC Current • wideband 600-3000 MHz • good isolation, 22 dB typ. • good output matching, VSWR 1.2 typ. • shielded case • aqueous washable • excellent amplitude unbalance, 0.15 dB typ. -40°C to 85°C Power Input (as a splitter) 5W max. 0.5W max. 1.5A (750 mA for each port) Permanent damage may occur if any of these limits are exceeded. Pin Connections SUM PORT 17 PORT 1 4 PORT 2 8 GROUND SEPS-2-33+ all others Generic photo used for illustration purposes only CASE STYLE: JF1258 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • cellular • GPS • PCS • CATV • ISM • wireless communication system Electrical Specifications at 25°C Outline Drawing Parameter PCB Land Pattern Frequency (MHz) Frequency Range Min. Typ. 600 Insertion Loss Above 3.0 dB Max. Unit 3000 MHz 700 - 2200 — 0.6 1.2 600 - 3000 — 0.8 1.6 dB 600 - 800 13 17.0 — 800 - 3000 17 24.0 — Phase Unbalance 600 - 3000 — 1.0 5.0 Degree Amplitude Unbalance 600 - 3000 — 0.15 0.6 dB Isolation dB Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A 1.250 31.75 B 1.000 25.40 C .200 5.08 D .125 3.18 E .100 2.54 H --- J --- K .050 1.27 L .060 1.52 M .920 23.37 F .060 1.52 VSWR (Port S) G .040 1.02 VSWR (Port 1-2) 600 - 800 — 1.45 1.75 800 - 3000 — 1.3 1.55 600-3000 — 1.2 1.4 :1 :1 wt grams 4.4 Demo Board MCL P/N: TB-760+ Suggested PCB Layout (PL-402) Electrical Schematic DC Through RF+DC RF+DC RF+DC Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 SEPS-2-33+ ED-16230/1 JC/CP/AM 200811 Page 1 of 2 SEPS-2-33+ Typical Performance Data Frequency (MHz) Total Loss1 (dB) 600.00 700.00 800.00 900.00 1000.00 1200.00 1400.00 1500.00 1600.00 1800.00 2000.00 2200.00 2400.00 2600.00 3000.00 S-1 S-2 3.34 3.31 3.30 3.31 3.32 3.33 3.33 3.35 3.37 3.43 3.45 3.51 3.62 3.71 3.89 3.36 3.33 3.31 3.32 3.33 3.34 3.36 3.38 3.41 3.48 3.51 3.58 3.68 3.78 4.09 Amplitude Unbalance (dB) Isolation (dB) 0.02 0.02 0.01 0.01 0.01 0.01 0.03 0.03 0.04 0.05 0.06 0.07 0.06 0.06 0.20 Phase Unbalance (deg.) 14.94 16.96 19.13 21.42 23.73 28.74 35.65 39.52 41.47 37.98 32.40 29.26 28.99 31.59 21.54 0.07 0.06 0.02 0.05 0.07 0.14 0.14 0.14 0.13 0.18 0.21 0.32 0.35 0.46 0.82 VSWR S VSWR 1 1.56 1.47 1.40 1.35 1.32 1.28 1.21 1.17 1.15 1.10 1.05 1.11 1.18 1.15 1.20 VSWR 2 1.25 1.24 1.24 1.24 1.25 1.24 1.20 1.18 1.16 1.11 1.06 1.10 1.16 1.19 1.08 1.23 1.22 1.22 1.22 1.23 1.24 1.22 1.20 1.18 1.14 1.10 1.14 1.21 1.22 1.08 1. Total Loss = Insertion Loss + 3dB splitter theoretical loss. SEPS-2-33+ TOTAL LOSS SEPS-2-33+ ISOLATION 5.0 50 S-2 4.5 ISOLATION (dB) TOTAL LOSS (dB) S-1 4.0 3.5 3.0 2.5 600 1100 1600 2100 FREQUENCY (MHz) 2600 3100 40 30 20 10 0 600 1100 1600 2100 FREQUENCY (MHz) 2600 3100 SEPS-2-33+ VSWR 2.0 #S-VSWR #1-VSWR #2-VSWR VSWR 1.8 1.6 1.4 1.2 1.0 600 1100 1600 2100 FREQUENCY (MHz) 2600 3100 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2