SEPS-3-33+

DC Pass Power Splitter/Combiner 3 Way-0° 50Ω Maximum Ratings 700 to 3000 MHz Features Permanent damage may occur if any of these limits are exceeded. • wide frequency band, 700-3000 MHz • good isolation, 18 dB typ. • good output matching, VSWR 1.1 typ. • good coplanarity • low unbalance • shielded case • aqueous washable Pin Connections Applications Operating Temperature Storage Temperature -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation DC Current SEPS-3-33+ 4W max. 0.5W max. 2.25 A(750mA for each port) SUM PORT 4 PORT 2 6 PORT 3 8 GROUND all others Frequency (MHz) Frequency Range 700 - 800 800 - 2200 2200 - 2700 2700 - 3000 700 - 800 800 - 2200 2200 - 2700 2700 - 3000 700 - 800 800 - 2200 2200 - 2700 2700 - 3000 700 - 800 800 - 2200 2200 - 2700 2700 - 3000 700- 800 800 - 2200 2200 - 2700 2700 - 3000 700 - 800 800 - 2200 2200 - 2700 2700 - 3000 Isolation Phase Unbalance Suggested Layout, Tolerance to be within ±.002 Amplitude Unbalance Outline Dimensions ( inch mm ) D .125 3.18 E .100 2.54 H --- J --- K .050 1.27 L .060 1.52 M .920 23.37 F .060 1.52 G .040 1.02 wt grams 4.4 Min. Typ. 700 Insertion Loss Above 4.8 dB C .200 5.08 and Reel Available Tape cost at no extra Devices/Reel 125 Electrical Specifications at 25°C PCB Land Pattern B 1.000 25.40 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size 13” Parameter Outline Drawing A 1.250 31.75 CASE STYLE: JF1258 • cellular • GPS • PCS • L Band 17 PORT 1 Generic photo used for illustration purposes only VSWR (Port S) VSWR (Port 1-3) — — — — 14 16 14 14 0.5 0.9 1.1 1.2 17 20 18 18 — — — — — — — — — — — — — — — — 1.0 2.0 2.5 4.0 0.2 0.2 0.1 0.3 1.5 1.2 1.6 1.5 1.3 1.3 1.4 1.4 Max. Unit 3000 MHz 1.0 1.5 1.6 1.7 — — — — 3.0 5.0 7.0 9.0 0.5 0.5 0.5 0.8 1.8 1.8 2.0 2.0 1.5 1.5 1.65 1.65 dB dB Degree dB :1 :1 Demo Board MCL P/N: TB-513+ Suggested PCB Layout (PL-309) Electrical Schematic DC Through RF+DC RF+DC RF+DC RF+DC Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. OR M151548 SEPS-3-33+ ED-13670 AD/CP/AM 200811 SEPS-3-33+ Typical Performance Data Freq. (MHz) Total Loss1 (dB) S-1 S-2 Amp. Unbal. (dB) S-3 Isolation (dB) 1-2 1-3 Phase VSWR VSWR VSWR VSWR Unbal. S 1 2 3 (deg.) 2-3 700.00 800.00 1000.00 1100.00 1200.00 5.27 5.11 5.32 0.22 21.17 16.82 20.80 0.61 5.17 5.03 5.23 0.20 26.47 18.13 25.50 0.76 5.11 5.00 5.19 0.19 29.79 20.42 29.11 1.11 5.14 5.03 5.23 0.20 25.96 21.37 26.05 1.24 5.19 5.08 5.29 0.21 23.83 22.20 24.15 1.36 1.56 1.29 1.18 1.28 1.34 1.29 1.16 1.28 1.03 1.25 1.09 1.26 1.08 1.22 1.08 1.24 1.16 1.18 1.09 1.20 1400.00 1500.00 1600.00 1800.00 1900.00 5.32 5.37 5.42 5.43 5.45 1.25 1.26 1.24 1.14 1.05 2000.00 2200.00 2500.00 2700.00 3000.00 5.48 5.46 5.56 5.68 5.70 5.76 5.99 6.01 6.01 5.91 5.93 5.88 5.78 6.01 5.76 5.19 5.23 5.29 5.33 5.39 5.40 5.45 5.49 5.50 5.52 0.22 0.22 0.21 0.16 0.13 22.04 21.87 22.12 24.40 25.68 23.70 24.43 25.13 25.89 25.82 22.49 22.32 22.58 25.06 26.98 1.40 1.37 1.29 1.20 1.19 0.11 25.17 25.35 27.38 1.21 0.08 20.54 23.74 22.65 1.21 0.02 17.07 22.04 18.94 0.92 0.06 17.62 21.67 19.83 1.16 0.25 18.75 19.52 20.18 3.61 1.08 1.03 1.01 1.04 1.03 1.13 1.13 1.13 1.11 1.10 1.11 1.06 1.02 1.00 1.01 1.09 1.05 1.10 1.05 1.41 1.17 1.13 1.15 1.66 1.34 1.09 1.30 1.45 1.36 1.06 1.33 1.26 1.26 1.36 1.26 1. Total Loss = Insertion Loss + 4.8dB splitter theoretical loss. SEPS-3-33+ TOTAL LOSS S-1(dB) 6.5 S-2(dB) 40 S-3(dB) ISOLATION (dB) TOTAL LOSS (dB) 7.0 6.0 5.5 5.0 4.5 600 1000 1400 1800 2200 FREQUENCY (MHz) SEPS-3-33+ ISOLATION 2600 3000 1-2 (dB) 35 1-3 (dB) 2-3 (dB) 30 25 20 15 600 1000 1400 1800 2200 FREQUENCY (MHz) 2600 3000 SEPS-3-33+ VSWR 2.2 #S-VSWR 2.0 #1-VSWR VSWR 1.8 1.6 1.4 1.2 1.0 600 1000 1400 1800 2200 FREQUENCY (MHz) 2600 3000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2