SLP-50+

Coaxial Low Pass Filter 50Ω SLP-50+ DC to 48 MHz Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input 0.5W max. Permanent damage may occur if any of these limits are exceeded. Features • good attenuation rate, 1.35 typ. 20dB/ 3dB BW ratio • rugged shielded case • other SLP models available with wide selection of cut-off frequencies Generic photo used for illustration purposes only CASE STYLE: FF99 Connectors Model SMA SLP-50+ Applications +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • lab use • test equipment • video equipment Low Pass Filter Electrical Specifications­ PASSBAND (MHz) fco (MHz) Nom. STOPBAND (MHz) VSWR (:1) (loss < 1 dB) (loss 3 dB) (loss > 20 dB) (loss > 40 dB) Passband Typ. Stopband Typ. DC-48 55 70-90 90-200 1.7 18 typical frequency response Outline Drawing electrical schematic AT T E NUAT ION, dB 40 dB R F IN 20 dB 3 dB 1 dB DC 0.9 1 1.35 1.75 F R E QUE NC Y / F co Frequency (MHz) B D .67 1.98 17.02 50.29 INSERTION LOSS 50 80 60 40 20 0 1 10 100 FREQUENCY(MHz) 1000 at RF level of 0 dBm Typical Performance Data Return Loss (dB) σ 0.05 0.0 0.23 0.1 0.37 0.1 0.43 0.1 0.40 0.1 0.65 0.1 0.70 0.1 1.46 0.2 4.65 0.3 7.96 0.4 14.84 0.5 20.96 6.0 23.73 0.6 26.33 0.7 27.59 0.7 30.55 0.8 38.67 1.2 41.07 1.4 43.54 1.6 45.78 1.8 47.97 2.2 56.91 4.1 68.38 5.2 67.23 4.2 68.62 4.6 69.35 3.3 69.36 5.8 77.07 8.8 69.51 5.2 71.27 9.7 Frequency (MHz) 41.2 22.7 15.7 15.4 25.1 14.8 17.1 9.9 3.0 1.5 0.5 0.3 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 RETURN LOSS 40 30 20 10 0 1 10 100 FREQUENCY(MHz) 1000 Group Delay (nsec) 1.00 8.50 15.50 23.00 30.50 38.00 45.00 48.00 49.50 52.00 53.50 55.00 57.00 59.00 61.00 63.00 65.00 67.00 69.00 70.00 72.50 75.00 80.00 81.00 82.50 85.00 87.50 90.00 100.00 125.00 GROUP DELAY (nsec) at RF level of 0 dBm 1.00 15.50 23.00 30.50 38.00 45.00 48.00 52.00 55.00 57.00 61.00 65.00 67.00 69.00 70.00 72.50 80.00 82.50 85.00 87.50 90.00 100.00 133.50 150.00 163.00 170.50 175.00 185.50 192.50 200.00 RETURN LOSS (dB) INSERTION LOSS (dB) 100 E wt .312 grams 7.92 42.0 3 Insertion Loss (dB) _ x Outline Dimensions ( inch mm ) R F OUT 50 45 40 35 30 25 20 15 10 5 0 at RF level of 0 dBm 0 25 16.62 16.73 17.87 17.45 18.79 21.89 25.87 30.56 33.92 42.09 42.83 38.77 29.20 22.03 16.66 14.04 11.17 10.62 8.06 7.57 7.70 7.14 6.57 4.93 3.61 0.84 1.23 0.73 0.70 0.69 GROUP DELAY 50 75 FREQUENCY (MHz) 100 125 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. C M151107 SLP-50+ 200522