SXLP-135+

Surface Mount Low Pass Filter 50Ω SXLP-135+ DC to 135 MHz Features Maximum Ratings Operating Temperature -40oC to 85oC Storage Temperature -55oC to 100oC RF Power Input 0.5W Max. Permanent damage may occur if any of these limits are exceeded. Pin Connections INPUT OUTPUT GROUND 1 8 2, 3, 4, 5, 6, 7 • high rejection • sharp cut-off • shielded package • aqueous washable • low cost • defense communications • receivers / transmitters • harmonic rejection PASSBAND (MHz) fco, MHz Nom. (Loss < 1dB) (Loss 3dB) (Loss > 20dB) (Loss > 40dB) Passband Typ. Stopband Typ. DC - 135 155 210 - 300 300 - 1600 1.3 18 ATTENUATION, dBdB ATTENUATION, F .060 1.52 J K .200 .470 5.08 11.94 L .055 1.40 M wt. .060 grams 1.52 3.0 0.9 1 1.35 1.75 1.35 1.75 0.9 FREQUENCY / Fco FREQUENCY / FCO Frequency (MHz) SXLP-135+ INSERTION LOSS 60 40 20 Return Loss (dB) 1 10 100 FREQUENCY (MHz) 1000 10000 Group Delay (nSec) 0.02 0.07 0.14 0.29 0.53 1.66 0.00 0.00 0.01 0.01 0.01 0.08 48.64 31.28 26.33 24.81 22.58 7.91 1.0 10.0 20.0 30.0 40.0 50.0 6.00 5.92 5.88 5.88 5.96 6.07 155.0 160.0 180.0 210.0 280.0 300.0 400.0 2.98 4.95 15.25 29.11 56.34 66.63 64.93 0.16 0.25 0.53 0.75 2.26 5.05 2.59 4.92 2.97 0.69 0.34 0.18 0.16 0.09 60.0 70.0 80.0 90.0 100.0 110.0 115.0 6.20 6.36 6.54 6.79 7.13 7.60 7.90 600.0 800.0 1000.0 1200.0 1400.0 1600.0 70.93 79.87 79.15 83.19 75.49 66.38 3.59 3.41 5.76 8.67 3.01 2.01 0.10 0.15 0.19 0.24 0.27 0.28 120.0 130.0 135.0 140.0 150.0 155.0 8.28 9.43 10.24 11.06 11.95 11.77 SXLP-135+ RETURN LOSS SXLP-135+ GROUP DELAY 14 50 40 30 20 10 12 10 8 6 4 0 0 Frequency (MHz) 1.0 10.0 30.0 90.0 135.0 150.0 GROUP DELAY (nSec) 80 3 10 Insertion Loss (dB) x σ 60 RETURN LOSS (dB) INSERTION LOSS (dB) dB 33dB dB 11dB Typical Performance Data at 25oC Demo Board MCL P/N: TB-368 Suggested PCB Layout (PL-230) 100 RF OUT RF IN 20dB dB 20 dB DC DC E .07 1.78 VSWR (:1) Functional Schematic 40dB dB 40 dB 40 Outline Dimensions ( inch mm ) D .200 5.08 STOPBAND (MHz) Typical Frequency Response Suggested Layout, Tolerance to be within ±.002 G H .040 .660 1.02 16.76 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Low Pass Filter Electrical Specifications (TAMB= 25OC) PCB Land Pattern C .27 6.86 +RoHS Compliant Applications Outline Drawing A B .44 .74 11.18 18.80 CASE STYLE: HF1139 1 10 100 FREQUENCY (MHz) 1000 10000 0 31 62 93 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com 124 155 REV. A M151121 EDR-7468/1U SXLP-135+ URJ/RAV 170127 Page 1 of 1