SYM-30DHW+

High IP3 Frequency Mixer SYM-30DHW+ Level 17 (LO Power +17 dBm) 5 to 3000 MHz Maximum Ratings Operating Temperature Storage Temperature Generic photo used for illustration purposes only Features -55°C to 100°C RF Power 200mW IF Current 40mA CASE STYLE: TTT167 • wideband, 5 to 3000 MHz • good L-R isolation, 40 dB typ. • excellent L-I isolation, 44 dB typ. • wide IF bandwidth, useable to 3 GHz • high IP3, 26 dBm typ. -40°C to 85°C Permanent damage may occur if any of these limits are exceeded. Pin Connections +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size 7” 13” Applications LO 2 • CDMA • GSM • DCS • PCN RF 1 IF 3 GROUND 4,5,6 Electrical Specifications FREQUENCY (MHz) Outline Drawing e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200 500 LO/RF CONVERSION LOSS* (dB) Mid-Band m IF fL-fU 5-3000 5-1500 — X σ Max. 6.5 .10 8.3 LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) L M U L M U Total Range Max. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. 9.1 1 dB COMP.: +14 dBm typ. *IP3 at 800-900 MHz. and 1800-1900 MHz 36 24 40 30 40 L = low range [fL to 10 fL] m= mid band [2fL to fU/2] 25 42 28 44 36 M = mid range [10 fL to fU/2] 48 IP3* at center band (dBm) Typ. 33 29 U = upper range [fU/2 to fU] PCB Land Pattern Typical Performance Data Frequency (MHz) RF 5.10 10.10 50.10 150.10 292.21 Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A B .38 .50 9.65 12.70 L .070 1.78 C .23 5.84 D .020 0.51 E .075 1.91 F G .250 .425 6.35 10.80 M N .270 .540 6.86 13.72 P .060 1.52 Q R .095 .445 2.41 11.30 H .187 4.75 J .050 1.27 S T .208 .415 5.28 10.54 Demo Board MCL P/N: TB-12 Suggested PCB Layout (PL-079) K .050 1.27 wt. grams 0.8 LO 35.11 40.11 80.11 180.11 322.22 Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +17dBm LO +17dBm LO +17dBm LO +17dBm LO +17dBm 6.52 6.37 6.32 6.35 6.54 35.53 36.08 35.81 36.19 36.11 39.27 42.21 44.46 44.52 44.86 1.16 1.09 1.04 1.07 1.14 1.65 1.64 1.65 1.65 1.59 434.31 576.42 718.52 860.63 1002.73 464.32 606.43 748.53 890.64 1032.74 6.48 6.51 6.35 6.48 6.61 36.06 36.15 36.82 37.89 38.92 44.17 43.45 43.17 43.23 43.28 1.21 1.31 1.40 1.51 1.58 1.60 1.61 1.56 1.56 1.57 1144.84 1286.94 1429.05 1600.10 1815.49 1174.85 1316.95 1459.06 1630.11 1845.50 6.51 6.34 6.15 6.10 6.32 40.92 42.38 42.75 42.06 40.35 43.96 45.03 45.18 45.85 45.85 1.67 1.62 1.56 1.37 1.20 1.51 1.52 1.45 1.42 1.36 2030.87 2246.25 2461.64 2677.02 3000.10 2060.88 2276.26 2491.65 2707.03 3030.11 6.91 7.53 7.53 7.31 7.24 37.09 34.69 34.48 36.24 39.16 44.23 43.76 46.04 45.72 41.54 1.34 1.52 1.44 1.29 1.37 1.31 1.22 1.12 1.09 1.27 Electrical Schematic LO RF IF Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E M151777 SYM-30DHW+ DJ/TD/CP 200813 Page 1 of 2 SYM-30DHW+ Performance Charts at IF Freq of 30 MHz LO=+14 dBm SYM-30DHW L-R ISOLATION 80 LO=+17 dBm LO=+20 dBm LO=+14 dBm 70 9.0 ISOLATION (dB) CONVERSION LOSS (dB) 10.0 SYM-30DHW CONVERSION LOSS 8.0 7.0 6.0 60 50 40 20 0 500 1000 1500 2000 FREQUENCY (MHz) 2500 0 3000 500 1000 1500 2000 FREQUENCY (MHz) SYM-30DHW L-I ISOLATION 55 50 VSWR 45 40 35 30 LO=+14 dBm 25 LO=+17 dBm LO=+20 dBm 20 0 500 2500 3000 SYM-30DHW LO VSWR 60 ISOLATION (dB) LO=+20 dBm 30 5.0 1000 1500 2000 FREQUENCY (MHz) 2500 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 LO=+14 dBm 0 3000 500 LO=+17 dBm LO=+20 dBm 1000 1500 2000 FREQUENCY (MHz) 2500 3000 SYM-30DHW IF VSWR SYM-30DHW RF VSWR 2.4 3.0 LO=+14 dBm LO=+17 dBm LO=+20 dBm 2.2 2.5 2.0 VSWR VSWR LO=+17 dBm 2.0 1.8 1.6 1.4 1.5 1.2 LO=+14 dBm LO=+17 dBm LO=+20 dBm 1.0 1.0 0 500 1000 1500 2000 FREQUENCY (MHz) 2500 3000 0 300 600 900 FREQUENCY (MHz) 1200 1500 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2