TC1-1-13MG2+

Surface Mount RF Transformer 50Ω TC1-1-13MG2+ 4.5 to 3000 MHz Features • suitable for tin/lead and RoHS solder systems • wideband, 4.5 to 3000 MHz • balanced transmission line • good return loss • excellent amplitude unbalance, 0.5 dB typ. and phase unbalance, 2 deg typ. in 1 dB bandwidth • plastic base with leads • aqueous washable Generic photo used for illustration purposes only CASE STYLE: AT224-3 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Reel Size 7” 13” • balanced to unbalanced transformation • push-pull amplifiers • PCS/DCS • MMDS e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio Max. Unit 3000 MHz 1 Frequency Range 4.5 Insertion Loss* Phase Unbalance Amplitude Unbalance 2000-3000 3 1000-2000 2 4.5-1000 1 4.5-1000 2 1000-2000 3 4.5-1000 0.5 1000-2000 0.5 dB Deg. dB *Insertion Loss is referenced to mid-band loss, 0.5 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 NOT USED 2 Permanent damage may occur if any of these limits are exceeded. Config. G Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M111888 TC1-1-13MG2+ ED-11376/1 IG/TD/CP/AM 201120 Page 1 of 2 TC1-1-13MG2+ Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .150 3.81 B .150 3.81 C .150 3.81 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .030 0.76 F .025 0.64 wt grams 0.10 Typical Performance Data FREQUENCY (MHz) INSERTION LOSS (dB) 4.50 10.00 50.00 100.00 500.00 1000.00 1500.00 2000.00 2500.00 3000.00 0.18 0.18 0.19 0.24 0.46 0.68 0.90 1.11 1.62 3.02 AMPLITUDE UNBALANCE (dB) 31.52 34.60 33.50 29.68 19.52 16.22 15.89 16.97 12.88 6.79 INSERTION LOSS 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 PHASE UNBALANCE (Deg.) 0.69 0.56 0.56 0.55 0.45 0.14 0.29 0.71 0.78 0.49 3.81 1.78 0.11 0.19 0.81 1.59 0.89 1.28 5.79 12.32 INPUT RETURN LOSS 40.0 RETURN LOSS (dB) INSERTION LOSS (dB) INPUT R. LOSS (dB) 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0 500 1000 1500 2000 FREQUENCY (MHz) 2500 3000 0 500 1000 1500 2000 FREQUENCY (MHz) 2500 3000 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a fullstated statement the Standard Termsare and the exclusive rights and anddo remedies please visit document. Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded not form thereunder, a part of this specification B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2