TC1-1-43+

Surface Mount RF Transformer 50Ω TC1-1-43+ 650 to 4000 MHz Features • wideband, 650 to 4000 MHz • balanced transmission line • good return loss • excellent amplitude unbalance, 0.5 dB typ. and phase unbalance, 3 deg typ. in 1 dB bandwidth • plastic base with leads • aqueous washable Generic photo used for illustration purposes only CASE STYLE: AT224-1A +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • balanced to unbalanced transformation • push-pull amplifiers • PCS/DCS • MMDS Reel Size 7” 13” e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Max. Unit Impedance Ratio Ohm Frequency Range 650 Insertion Loss* Phase Unbalance 4000 650-4000 2.0 800-3000 1.0 800-3000 3 650-4000 4 dB Deg. 0.5 800-3000 650-4000 Amplitude Unbalance MHz dB 0.5 *Insertion Loss is referenced to mid-band loss, 0.5 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 NOT USED 2 Permanent damage may occur if any of these limits are exceeded. Config. G Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 TC1-1-43+ ED-13728A/2 IG/CP/AM 210412 Page 1 of 2 TC1-1-43+ Outline Drawing PCB Land Pattern Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. Suggested Layout, Tolerance to be within±.002 Outline Dimensions ( inch mm ) A .150 3.81 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 Typical Performance Data FREQUENCY (MHz) 650.00 700.00 800.00 1000.00 1600.00 2000.00 2600.00 3000.00 3800.00 4000.00 19.40 19.03 19.01 18.85 16.34 15.36 16.20 20.76 9.18 7.51 1.6 7.04 6.11 4.73 3.45 0.32 0.42 0.66 1.07 4.79 5.95 INPUT RETURN LOSS 21.0 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 500 PHASE UNBALANCE (Deg.) 0.72 0.70 0.65 0.50 0.15 0.05 0.40 0.56 0.41 0.09 23.0 RETURN LOSS (dB) INSERTION LOSS (dB) 0.30 0.30 0.32 0.35 0.45 0.53 0.62 0.57 1.34 1.71 INSERTION LOSS 1.8 AMPLITUDE UNBALANCE (dB) INPUT R. LOSS (dB) INSERTION LOSS (dB) 19.0 17.0 15.0 13.0 11.0 9.0 7.0 1000 1500 2000 2500 3000 FREQUENCY (MHz) 3500 4000 5.0 500 1000 1500 2000 2500 3000 FREQUENCY (MHz) 3500 4000 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a fullstated statement the Standard Termsare and the exclusive rights and anddo remedies please visit document. Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded not form thereunder, a part of this specification B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2