TC1-1T-152X+

Surface Mount RF Transformer 50 Ω TC1-1T-152X+ 5 to 1500 MHz The Big Deal CASE STYLE: AT1521 • Super wideband, 5 to 1500 MHz • Low insertion loss, 1.5 dB typ. • Amplitude Unbalance, ±0.2 dB typ. • Good input return loss, 14 dB typ. • Low phase unbalance, ±1.5˚ typ. • Common mode rejection, 30 dB typ. Product Overview Mini-Circuits’ TC1-1T-152X+ is a surface-mount transmission line transformer (with bias center tap) covering a very wide frequency range from 5 to 1500 MHz. The transformer provides low insertion loss with excellent phase and amplitude performance. Featuring core and wire construction on a 5-lead unit measures 0.15 x 0.15 x 0.16 inch. Key Features Feature Advantages Wideband, 5 to 1500 MHz Super wide frequency range covers bandwidth requirements for many broadband applications. Low insertion loss, 1.5 dB typ. This unit provides excellent signal transmission from input to output with consistent performance across its entire frequency range. Good Phase and Amplitude Unbalance Provides good CMRR. DC current 200 mA Supply DC current from center tap. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 3 ® Balanced to Unbalanced top hat RF Transformer 50 Ω TC1-1T-152X+ 5 to 1500 MHz Features • suitable for tin/lead and RoHS solder systems • wideband, 5 to 1500 MHz • balanced transmission line • excellent phase unbalance, 1.5° typ • excellent amplitude unbalance, 0.2 dB typ. • aqueous washable Generic photo used for illustration purposes only CASE STYLE: AT1521 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • VHF/UHF transmitters • cellular • GPS • communication e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Reel Size 7” 13” Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio Max. Unit 1 Frequency Range 5 Insertion Loss* Amplitude Unbalance Phase Unbalance Common mode rejection Input Return Loss Ohm 1500 5 - 870 — 1.0 1.6 870 - 1000 — 1.2 1.7 1000 - 1500 — 1.8 2.5 5 - 870 — 0.1 0.7 870 - 1000 — 0.3 0.9 1000 - 1500 — 0.5 1.8 6 5 - 870 — 1.0 870 - 1000 — 2.0 8 1000 - 1500 — 3.0 10 5-1000 22 33 — 1000-1500 20 28 — 5-870 — 15 — 870-1000 — 12 — MHz dB dB Degree dB dB * Insertion Loss is referenced to mid-band loss, 0.7 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 SECONDARY DOT 1 SECONDARY 3 SECONDARY CT 2 RF Power 0.5W DC Current 200mA Permanent damage may occur if any of these limits are exceeded. Config. M1 Product Marking Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. OR M171506 TC1-1T-152X+ WP/CP/AM 190805 Page 2 of 3 TC1-1T-152X+ Outline Drawing PCB Land Pattern Note: 1. Case Material Plastic 2. Termination Finish: Tin plate over Nickel plate. 3. Lead #1 identifier shall be located in the cross-hatched area shown, on bottom view. Identifier may be either a molded or marked feature. 4.Top-Hat total thickness: .013 inches max. Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .150 3.81 B .150 3.81 C .160 4.06 D .050 1.27 E .040 1.02 F .025 0.64 G .028 0.71 H .065 1.65 J .190 4.83 K wt .030 grams 0.76 0.15 Typical Performance Data AVERAGE INSERTION LOSS (dB) FREQUENCY (MHz) 5 10 100 200 400 600 800 1000 1200 1400 1500 0.79 0.71 0.73 0.77 0.87 0.98 1.14 1.32 1.54 1.79 1.92 21.59 24.37 24.80 21.92 17.73 15.25 13.56 12.43 11.48 10.65 10.27 PHASE UNBALANCE (Deg.) 0.00 0.00 0.02 0.05 0.11 0.04 0.05 0.24 0.47 0.70 0.81 CMRR (dB) 0.00 0.06 0.64 1.25 1.80 2.27 2.86 3.05 3.23 3.24 3.16 77.68 65.55 44.93 38.91 35.39 34.01 32.01 30.47 28.19 26.17 25.34 TC1-1T-152X+ CMRR 85.0 CMRR (dB) 2.5 2.0 1.5 75.0 65.0 55.0 45.0 35.0 1.0 25.0 0.5 0.0 AMPLITUDE UNBALANCE (dB) TC1-1T-152X+ AVERAGE INSERTION LOSS 3.0 INSERTION LOSS (dB) INPUT R. LOSS (dB) 15.0 0 500 1000 1500 5.0 0 500 FREQUENCY (MHz) 1000 1500 FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a full stated statement the Standard Termsare and the exclusive rights and remedies visit Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded and do not formthereunder, a part of thisplease specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 3 of 3