TC1-1TX+

® Surface Mount top hat RF Transformer 50Ω TC1-1TX+ 0.4 to 500 MHz Features • usable over 0.4-500 MHz • excellent amplitude unbalance, 0.1 dB typ. and phase unbalance, 2 deg typ. in 1 dB bandwidth • good return loss • plastic base with leads • aqueous washable Generic photo used for illustration purposes only CASE STYLE: AT1521 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • VHF/UHF receivers/transmitters • push-pull amplifiers Reel Size 7” 13” e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Impedance Ratio 1 Frequency Range 0.4 Insertion Loss* Amplitude Unbalance Phase Unbalance Typ. Max. Unit Ohm 500 0.4-500 3 0.5-300 2 1-100 1 1-100 0.1 0.5-300 0.6 1-100 2 0.5-300 5 MHz dB dB Degree * Insertion Loss is referenced to mid-band loss, 0.35 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 SECONDARY CT 2 Permanent damage may occur if any of these limits are exceeded. Product Marking Config. A Demo Board MCL P/N: TB-145 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. B M164261 TC1-1TX+ ED-9236/2 IG/TD/CP/AM 200430 Page 1 of 2 TC1-1TX+ Outline Drawing PCB Land Pattern Orientation Dot on Top Hat & Marking on the Substrate both refers to Pin#1 of the Unit. Suggested Layout, Tolerance to be within±.002 Top-hat total thickness: .013 inches MAX. Outline Dimensions ( inch mm ) A .150 3.81 B .150 3.81 C .160 4.06 D .050 1.27 E .040 1.02 F .025 0.64 G .028 0.71 H .065 1.65 J .190 4.83 K wt .030 grams 0.76 0.15 Typical Performance Data FREQUENCY (MHz) INSERTION LOSS (dB) 0.30 1.00 5.00 10.00 50.00 100.00 200.00 300.00 400.00 500.00 0.88 0.57 0.33 0.32 0.40 0.51 0.78 1.10 1.46 1.84 AMPLITUDE UNBALANCE (dB) 15.46 21.01 27.35 28.55 23.46 18.34 13.01 10.06 8.16 6.90 INSERTION LOSS 2.2 1.8 1.4 1.0 0.6 0.2 PHASE UNBALANCE (Deg.) 0.06 0.04 0.02 0.02 0.02 0.06 0.21 0.47 0.82 1.26 0.03 0.05 0.01 0.15 0.63 1.24 2.57 3.99 5.66 7.50 INPUT RETURN LOSS 30.0 RETURN LOSS (dB) INSERTION LOSS (dB) INPUT R. LOSS (dB) 25.0 20.0 15.0 10.0 5.0 0.0 0 100 200 300 FREQUENCY (MHz) 400 500 0 100 200 300 FREQUENCY (MHz) 400 500 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a full stated statement the Standard Termsare and the exclusive rights and remedies visit Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded and do not formthereunder, a part of thisplease specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2