TC1-42+

Surface Mount RF Transformer 50Ω TC1-42+ 0.25 to 400 MHz Features • plastic base with solder plated leads • excellent amplitude unbalance, 0.2 dB typ. and phase unbalance, 3 deg. typ. in 1dB bandwidth • aqueous washable Generic photo used for illustration purposes only CASE STYLE: AT224-1A +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • balanced to unbalanced • push-pull amplifier Reel Size 7” 13” e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio Max. Unit 1 Frequency Range 0.25 Insertion Loss* Ohm 400 0.25-400 3 0.35-250 2 0.7-150 1 MHz dB *Insertion Loss is referenced to mid-band loss, 0.3 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 1 RF Power 0.25W SECONDARY DOT DC Current 30mA SECONDARY Permanent damage may occur if any of these limits are exceeded. 3 NOT USED 2.5 Config. C Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. B M151107 ED-12659/1 TC1-42+ IG/TD/CP/AM 210412 Page 1 of 2 TC1-42+ Outline Drawing Demo Board MCL P/N: TB-77 Suggested PCB Layout (PL-243) PCB Land Pattern Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. Suggested Layout, Tolerance to be within±.002 Outline Dimensions ( inch mm ) A .150 3.81 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 Typical Performance Data FREQUENCY (MHz) INPUT R. LOSS (dB) INSERTION LOSS (dB) 0.25 0.50 1.00 5.00 10.00 50.00 100.00 200.00 300.00 400.00 0.79 0.63 0.52 0.34 0.30 0.37 0.48 0.69 0.95 1.44 15.85 20.29 23.72 29.93 31.13 24.78 19.43 13.85 10.83 8.85 RETURN LOSS 50 RETURN LOSS (dB) INSERTION LOSS (dB) INSERTION LOSS 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 40 30 20 10 0 0 50 100 150 200 250 300 FREQUENCY (MHz) 350 400 0 50 100 150 200 250 300 350 400 FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a fullstated statement the Standard Termsare and the exclusive rights and anddo remedies please visit document. Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded not form thereunder, a part of this specification B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2