TC16-161TX+

® Surface Mount top hat RF Transformer 50Ω TC16-161TX+ 0.6 to 160 MHz Features • plastic base with solder plated leads • excellent amplitude unbalance, 0.1dB typ. and phase unbalance, 0.5 deg. typ. Generic photo used for illustration purposes only CASE STYLE: AT1521 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Reel Size 7” 13” • impedance matching • balanced amplifier e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Electrical Specifications at 25°C Parameter Condition Min. Typ. Impedance Ratio (secondary / primary) Max. Unit 16 Frequency Range 0.6 Insertion Loss* Ohm 160 0.6-160 3 1.5-120 2 3-80 1 MHz dB * Insertion Loss is referenced to mid-band loss, 0.7 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 SECONDARY CT 2 NOT USED 5 Permanent damage may occur if any of these limits are exceeded. Product Marking Config. A Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 TC16-161T+ ED-7614/3 IG/TD/CP/AM 190620 Page 1 of 2 TC16-161TX+ Outline Drawing Demo Board MCL P/N: TB-145 Suggested PCB Layout (PL-244) PCB Land Pattern Note: 1. Case Material Plastic 2. Termination Finish: Tin plate over Nickel plate. 3. Lead #1 identifier shall be located in the cross-hatched area shown, on bottom view. Identifier may be either a molded or marked feature. 4.Top-Hat total thickness: .013 inches max. Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .150 3.81 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 Typical Performance Data FREQUENCY (MHz) INPUT R. LOSS (dB) 0.60 1.40 14.15 1.00 1.16 17.14 1.50 0.99 19.51 5.00 0.64 29.93 10.00 0.59 36.06 50.00 0.74 16.77 80.00 0.94 12.74 100.00 1.10 10.87 120.00 1.31 9.38 160.00 1.83 7.18 TC16-161T+ INSERTION LOSS 5.0 TC16-161T+ INPUT RETURN LOSS 50 RETURN LOSS (dB) INSERTION LOSS (dB) INSERTION LOSS (dB) 4.0 3.0 2.0 1.0 40 30 20 10 0 0.0 0 50 100 150 FREQUENCY (MHz) 200 0 50 100 150 200 FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a full stated statement the Standard Termsare and the exclusive rights and remedies visit Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded and do not formthereunder, a part of thisplease specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2