TCM1-1X+

® Surface Mount top hat RF Transformer 50Ω TCM1-1X+ 1.5 to 500 MHz Features • excellent amplitude unbalance. 0.2 dB typ. • excellent phase unbalance, 4 deg. typ. in 1 dB bandwidth • plastic base with solder plated leads • aqueous washable Generic photo used for illustration purposes only CASE STYLE: DB1627 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • impedance matching • balanced to unbalanced transformation • push-pull amplifier e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Reel Size 7” 13” Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio Max. Unit 1 Frequency Range Ohm 1.5 Insertion Loss* 500 1.5 - 500 3 2.5 - 400 2 5 - 350 1 MHz dB * Insertion Loss is referenced to mid-band loss, 0.9 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -20°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 1 RF Power 0.25W SECONDARY DOT DC Current 30mA SECONDARY Permanent damage may occur if any of these limits are exceeded. 3 NOT USED 2,5 Config. C Product Marking Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. B M164261 TCM1-1X+ IG/TD/CP/AM 191017 Page 1 of 2 TCM1-1X+ Outline Drawing PCB Land Pattern Orientation dot on top hat & orientation feature on substrate corresponds to pin#1 Top-Hat total thickness: .013 inches MAX. Outline Dimensions ( inch mm ) A .160 4.06 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 Typical Performance Data FREQUENCY (MHz) INSERTION LOSS (dB) INPUT R. LOSS (dB) 1.00 1.93 11.00 8.80 0.88 20.96 50.00 0.99 21.15 110.00 1.15 17.98 170.00 1.29 15.11 200.00 1.40 14.01 270.00 1.59 11.90 369.00 1.95 9.77 402.00 2.04 9.20 501.00 2.38 7.88 RETURN LOSS 30 4.0 25 RETURN LOSS (dB) INSERTION LOSS (dB) INSERTION LOSS 5.0 3.0 2.0 1.0 0.0 20 15 10 5 1 101 201 301 FREQUENCY (MHz) 401 501 1 101 201 301 FREQUENCY (MHz) 401 501 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. Notes B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. entitled the rights anddocument benefits contained therein. For a full statement of thelimited Standard Terms and and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ C. The parts covered by thistospecification are subject to Mini-Circuits standard warranty terms and conditions (collectively, “Standard Terms”); Purchaserswebsite of this at part are entitled www.minicircuits.com/MCLStore/terms.jsp to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mini-Circuits: TCM1-1X+