TCM4-1W+

TCM4-1WX+ Upgraded Version* Surface Mount RF Transformer 50Ω Addition of Top-hat *Benefits ® feature • Allows faster pick-and-place • Enables visual identification marking 3 to 800 MHz TCM4-1W+ Features • wide bandwidth. 3 to 800 MHz • good return loss • plastic base with solder plated leads • aqueous washable Generic photo used for illustration purposes only CASE STYLE: DB714 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • CATV • VHF/UHF • balanced amplifier • impedance matching e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Reel Size 7” 13” Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio (Secondary/Primary) Max. Unit 4 Frequency Range Ohm 3 Insertion Loss* 800 3 - 800 3 4 - 400 2 10 - 100 1 MHz dB * Insertion Loss is referenced to mid-band loss, 0.8 dB typ. Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -20°C to 85°C PRIMARY DOT 6 Storage Temperature -55°C to 100°C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 SECONDARY CT 2 NOT USED 5 Permanent damage may occur if any of these limits are exceeded. Config. A Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. G ECO-006688 TCM4-1W+ ED-7875/7 IG/CP 210303 Page 1 of 2 TCM4-1W+ Outline Drawing Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .160 4.06 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 Typical Performance Data FREQUENCY (MHz) INSERTION LOSS (dB) INPUT R. LOSS (dB) 3.00 1.16 16.43 5.00 1.02 18.47 7.00 0.95 19.69 10.00 0.93 20.74 46.00 0.94 22.08 100.00 1.01 21.46 220.00 1.12 19.83 400.00 1.28 16.64 640.00 1.70 11.87 800.00 2.29 9.01 RETURN LOSS 30.0 4.0 25.0 RETURN LOSS (dB) INSERTION LOSS (dB) INSERTION LOSS 5.0 3.0 2.0 1.0 0.0 20.0 15.0 10.0 5.0 0 160 320 480 FREQUENCY (MHz) 640 800 0 160 320 480 FREQUENCY (MHz) 640 800 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. Notes B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. entitled the rights anddocument benefits contained therein. For a full statement of thelimited Standard Terms and and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ C. The parts covered by thistospecification are subject to Mini-Circuits standard warranty terms and conditions (collectively, “Standard Terms”); Purchaserswebsite of this at part are entitled www.minicircuits.com/MCLStore/terms.jsp to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2