TCP-2-10-75+

SURFACE MOUNT Power Splitter/Combiner 75Ω 2 Way-0° TCP-2-10-75+ 5 to 1000 MHz FEATURES y Low insertion, 0.3 dB typ. y Excellent amplitude unbalance, 0.2 dB typ. y very good phase unbalance, 1.0 deg. typ. y External resistor & capacitor required y Aqueous washable y Leads for excellent solderability y Low cost Generic photo used for illustration purposes only CASE STYLE: DB714 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y CATV y Cellular ELECTRICAL SPECIFICATIONS AT 25°C Parameter Frequency (MHz) Frequency Range Min. Typ. 5 Insertion Loss, above 3.0 dB Isolation Phase Unbalance Amplitude Unbalance Operating temperature Storage temperature RF Power Input (as splitter) Unit MHz 5 - 50 — 0.3 1.4 50 - 500 — 0.3 0.9 500 - 1000 — 0.6 1.3 5 - 50 14 24 — 50 - 500 19 29 — 500 - 1000 16 30 — 5 - 50 — — 6.0 50 - 500 — — 4.0 500 - 1000 — — 3.0 5 - 50 — — 1.2 50 - 500 — — 0.6 500 - 1000 — — 0.5 MAXIMUM RATINGS Parameter Max. 1000 dB dB Degree dB FUNCTIONAL SCHEMATIC Ratings PORT 1 -40°C to 85°C -55°C to 100°C 1 2 3 0.5 W max. 150 Ohm Permanent damage may occur if any of these limits are exceeded. 6 5 4 1.5pF PORT 2 PORT S REV. K ECO-012587 TCP-2-10-75+ DY/TD/CP/AM 220322 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 3 SURFACE MOUNT Power Splitter/Combiner PIN CONNECTIONS OUTLINE DRAWING SUM PORT 6 PORT 1 3 PORT 2 4 GROUND 1 CONNECT 2,5 EXT. RESISTOR 150Ω 3,4 EXT. CAPACITOR 1.5pF TCP-2-10-75+ Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. 2 OR 5 TO GND Lead #1 identifier shall be located in the cross-hatched area shown. PRODUCT IdentifierMARKING: may be eitherN/A a molded or marked feature. PCB Land Pattern DEMO BOARD MCL P/N: TB-124 SUGGESTED PCB LAYOUT (PL-002) Suggested Layout, Tolerance to be within ±.002 OUTLINE DIMENSIONS (Inches mm ) A .160 4.06 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 TAPE & REEL INFORMATION: F47 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 SURFACE MOUNT Power Splitter/Combiner TCP-2-10-75+ TYPICAL PERFORMANCE DATA AT 25°C Total Loss1 (dB) VSWR (:1) S-1 S-2 Amplitude Unbalance (dB) 5.00 3.14 3.32 0.19 27.67 0.39 1.02 1.16 1.21 8.00 3.13 3.31 0.18 28.39 0.22 1.01 1.15 1.19 10.00 3.13 3.32 0.18 28.59 0.14 1.01 1.14 1.19 20.00 3.14 3.32 0.18 28.82 0.06 1.00 1.14 1.18 35.00 3.14 3.32 0.19 28.77 0.04 1.00 1.14 1.18 50.00 3.14 3.33 0.18 28.68 0.01 1.00 1.14 1.18 80.00 3.15 3.33 0.18 28.61 0.08 1.01 1.13 1.17 110.00 3.16 3.34 0.18 28.60 0.16 1.02 1.13 1.17 150.00 3.17 3.35 0.18 28.65 0.12 1.03 1.12 1.16 350.00 3.21 3.39 0.18 28.62 0.20 1.10 1.11 1.10 550.00 3.25 3.40 0.15 26.72 0.34 1.21 1.17 1.13 650.00 3.27 3.41 0.14 25.16 0.31 1.27 1.23 1.19 750.00 3.34 3.47 0.13 23.56 0.39 1.33 1.30 1.26 900.00 3.54 3.65 0.11 21.40 0.55 1.40 1.41 1.36 1000.00 3.71 3.80 0.09 20.18 0.68 1.44 1.48 1.42 Frequency (MHz) Isolation (dB) Phase Unbalance (deg.) S 1 2 1. Total Loss = Insertion Loss + 3dB splitter loss. TOTAL LOSS S-1(dB) 3.8 ISOLATION 40 S-2(dB) ISOLATION (dB) TOTAL LOSS (dB) 4.0 3.6 3.4 3.2 3.0 35 30 25 20 15 0 200 400 600 800 1000 0 200 FREQUENCY (MHz) 400 600 800 1000 FREQUENCY (MHz) VSWR 1.6 #S-VSWR 1.5 #1-VSWR #2-VSWR VSWR 1.4 1.3 1.2 1.1 1.0 0 200 400 600 800 1000 FREQUENCY (MHz) NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3