TCP-2-10X+

top hat ® SURFACE MOUNT Power Splitter/Combiner 50Ω TCP-2-10X+ 2 Way-0° 5 to 1000 MHz FEATURES y Low insertion, 0.5 dB typ. y Excellent amplitude unbalance, 0.1 dB typ. y Very good phase unbalance, 1.0 deg. typ. y External resistor & capacitor required y Aqueous washable y Leads for excellent solderability y Low cost Generic photo used for illustration purposes only CASE STYLE: DB1627 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y Cellular y VHF/UHF y Communications systems ELECTRICAL SPECIFICATIONS AT 25°C Parameter Frequency (MHz) Frequency Range Isolation Phase Unbalance Amplitude Unbalance MAXIMUM RATINGS Operating temperature Storage temperature RF Power Input (as splitter) Typ. 5 Insertion Loss, above 3.0 dB Parameter Min. Max. Unit 1000 MHz 5 - 50 — 0.3 0.9 50 - 500 — 0.5 0.9 500 - 1000 — 0.5 1.4 5 - 50 17 25 — 50 - 500 16 25 — 500 - 1000 16 21 — 5 - 50 — — 4.0 50 - 500 — — 4.0 500 - 1000 — — 6.0 5 - 50 — — 0.6 50 - 500 — — 0.6 500 - 1000 — — 0.3 dB dB Degree dB FUNCTIONAL SCHEMATIC Ratings -40°C to 85°C -55°C to 100°C 0.5 W max. Permanent damage may occur if any of these limits are exceeded. REV. B ECO-012587 TCP-2-10X+ ED-8261/1 DY/CP/AM 220627 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 1 OF 3 top hat ® SURFACE MOUNT Power Splitter/Combiner PIN CONNECTIONS OUTLINE DRAWING SUM PORT 6 PORT 1 3 PORT 2 4 GROUND 1 CONNECT 2,5 EXT. RESISTOR 100Ω 3,4 EXT. CAPACITOR 1.5pF TCP-2-10X+ 2 OR 5 TO GND        
  PCB Land Pattern  ­   €   ‚ƒ ƒ„
 € ­ €… PRODUCT MARKING: PC DEMO BOARD MCL P/N: TB-232 SUGGESTED PCB LAYOUT (PL-001) OUTLINE DIMENSIONS (Inches mm ) A .160 4.06 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 TAPE & REEL INFORMATION: F47 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 2 OF 3 top hat ® SURFACE MOUNT Power Splitter/Combiner TCP-2-10X+ TYPICAL PERFORMANCE DATA AT 25°C Total Loss1 (dB) VSWR (:1) S-1 S-2 Amplitude Unbalance (dB) 5.00 3.10 3.24 0.14 32.43 0.15 1.02 1.11 1.14 6.00 3.10 3.24 0.14 32.64 0.15 1.02 1.11 1.14 8.00 3.10 3.24 0.14 32.81 0.09 1.02 1.10 1.14 10.00 3.11 3.24 0.13 32.85 0.09 1.02 1.10 1.14 25.00 3.12 3.25 0.14 32.38 0.01 1.02 1.10 1.14 40.00 3.13 3.27 0.14 31.84 0.06 1.02 1.10 1.14 60.00 3.13 3.28 0.14 31.23 0.09 1.03 1.10 1.13 Frequency (MHz) Isolation (dB) Phase Unbalance (deg.) S 1 2 90.00 3.15 3.29 0.14 30.38 0.10 1.03 1.10 1.13 120.00 3.16 3.30 0.14 29.54 0.11 1.04 1.09 1.13 200.00 3.19 3.33 0.14 27.50 0.24 1.05 1.09 1.11 400.00 3.27 3.40 0.13 23.84 0.45 1.07 1.06 1.06 600.00 3.37 3.48 0.11 21.78 0.71 1.09 1.05 1.02 800.00 3.49 3.58 0.09 20.95 0.98 1.09 1.08 1.09 900.00 3.55 3.63 0.08 21.06 1.15 1.09 1.12 1.14 1000.00 3.63 3.70 0.07 21.68 1.29 1.08 1.16 1.20 1. Total Loss = Insertion Loss + 3dB splitter loss. TOTAL LOSS S-1(dB) 3.8 S-2(dB) ISOLATION (dB) TOTAL LOSS (dB) 4.0 ISOLATION 40 3.6 3.4 3.2 3.0 35 30 25 20 15 0 200 400 600 800 1000 0 200 FREQUENCY (MHz) 400 600 800 1000 FREQUENCY (MHz) VSWR 1.25 #S-VSWR 1.20 #1-VSWR #2-VSWR VSWR 1.15 1.10 1.05 1.00 0 200 400 600 800 1000 FREQUENCY (MHz) NOTES A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the standard. Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/terms/viewterm.html www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com PAGE 3 OF 3