ML6101X402XX

ML6101 ML6101 Series Voltage Monitor Application Battery Charger Voltage Monitor Features CMOS Low Power Consumption : Typical 1.0uAat Vin=2.0V Selectable Monitor V oltage : 1.1V to 6.0V in 0.1V increments HighlyAccurate : Detect V oltage 1.1V to 1.9V + 3% Detect V oltage 2.0V to 6.0V + 2% Operating V oltage : 0.8V to 10.0V PackageAvailable : SOT23 (150mW), SOT89 (500mW) & TO92 (300mW) General Description The ML6101 is a group of high-precision and low-power Voltage Monitor. The ML6101 consists of a highly-accurate and low-power reference voltage source, a comparator, a hysteresis circuit, and an output driver. Detect voltage is very accurate and stable with N-channel open drain and CMOS, are available. Output High when the Monitor Voltage goes upto or higher than the user selected Monitor Voltage. Block Diagram (1) CMOS Output (2) N-Channel Open Drain Output Absolute Maximum Ratings Parameter Input Voltage Output Current Output Voltage Continuous SOT-23 Total Power SOT-89 Dissipation TO-92 Operating Ambient Temperature Storage Temperature Symbol VIN IOUT VOUT Pd Ratings 10 50 VSS-0.3 ~VIN+0.3 150 500 300 Topr Tstg P1/11 -40 ~ +70 -40 ~ +70 o o Units V mA V mW C C Rev. A, June 2005 ML6101 Electrical Characteristics Parameter Monitor Voltage Hysteresis Range Symbol VMON VHYS Conditions Min Typ VMON = 1.1V to 1.9V VMON X0.97 VMON = 2.0V to 6.0V VMON X0.98 VMON = 1.1V to 2.9V X0.04 VMON X0.05 VMON = 3.0V to 6.0V X0.015 VMON X0.025 VIN = 1.0V 0.8 VIN = 2.0V 1.0 VIN = 3.0V 1.3 VIN = 4.0V 1.6 VIN = 5.0V 2.0 VDF = 1.1~6.0V 0.8 Nch VDS = 0.5V 1.0 VIN = 1.0V 3.0 VIN = 2.0V 5.0 VIN = 3.0V 11.0 VIN = 4.0V 13.0 VIN = 5.0V Pch VDS = 2.1V -10.0 VIN = 8.0V (CMOS Output) While VIN changes from 0.6V to 10V Max Units V X1.03 V X1.02 V X0.06 X0.035 V 2.0 2.5 uA 3.0 3.5 4.0 10.0 V Supply Current ISS Operating Voltage VIN Output Current IOUT mA Transient Delay Time (VDR -> VOUT Inversion) tDLY 0.2 ms P2/11 Rev. A, June 2005 ML6101 Electrical Characteristics By Detector Threshold Part Number ML6101X113XX ML6101X123XX ML6101X133XX ML6101X143XX ML6101X153XX ML6101X163XX ML6101X173XX ML6101X183XX ML6101X193XX ML6101X202XX ML6101X212XX ML6101X222XX ML6101X232XX ML6101X242XX ML6101X252XX ML6101X262XX ML6101X272XX ML6101X282XX ML6101X292XX ML6101X302XX ML6101X312XX ML6101X322XX ML6101X332XX ML6101X342XX ML6101X352XX ML6101X362XX ML6101X372XX ML6101X382XX ML6101X392XX ML6101X402XX ML6101X412XX ML6101X422XX ML6101X432XX ML6101X442XX ML6101X452XX ML6101X462XX ML6101X472XX ML6101X482XX ML6101X492XX ML6101X502XX ML6101X512XX ML6101X522XX ML6101X532XX ML6101X542XX ML6101X552XX ML6101X562XX ML6101X572XX ML6101X582XX ML6101X592XX ML6101X602XX Standard Monitor Accuracy Detector Threshold VMON (V) MIN. 1.067 1.164 1.261 1.358 1.455 1.552 1.649 1.746 1.843 1.960 2.058 2.156 2.254 2.352 2.450 2.548 2.646 2.744 2.842 2.940 3.038 3.136 3.234 3.332 3.430 3.528 3.626 3.724 3.822 3.920 4.018 4.116 4.214 4.312 4.410 4.508 4.606 4.704 4.802 4.900 4.998 5.096 5.194 5.292 5.390 5.488 5.586 5.684 5.782 5.880 TYP. 1.100 1.200 1.300 1.400 1.500 1.600 1.700 1.800 1.900 2.000 2.100 2.200 2.300 2.400 2.500 2.600 2.700 2.800 2.900 3.000 3.100 3.200 3.300 3.400 3.500 3.600 3.700 3.800 3.900 4.000 4.100 4.200 4.300 4.400 4.500 4.600 4.700 4.800 4.900 5.000 5.100 5.200 5.300 5.400 5.500 5.600 5.700 5.800 5.900 6.000 Hysteresis Range VHYS (V) Condition Supply Current ISS (uA) TYP. MAX. 3% 2% MAX. MIN. MAX. 1.133 1.236 1.339 1.442 1.545 1.648 1.751 1.854 1.957 VMON x 0.04 VMON x 0.06 2.040 2.142 2.244 2.346 2.448 2.550 2.652 2.754 2.856 2.958 3.060 3.162 3.264 3.366 3.468 3.570 3.672 3.774 3.876 3.978 4.080 4.182 4.284 4.386 4.488 4.590 VMON x 0.015 VMON x 0.035 4.692 4.794 4.896 4.998 5.100 5.202 5.304 5.406 5.508 5.610 5.712 5.814 5.916 6.018 6.120 VIN = 1.0V 0.8 2.0 VIN = 2.0V 1.0 2.5 VIN = 3.0V 1.3 3.0 VIN = 4.0V 1.6 3.5 VIN = 5.0V 2.0 4.0 P3/11 Rev. A, June 2005 ML6101 Part Number ML6101X113XX ML6101X123XX ML6101X133XX ML6101X143XX ML6101X153XX ML6101X163XX ML6101X173XX ML6101X183XX ML6101X193XX ML6101X202XX ML6101X212XX ML6101X222XX ML6101X232XX ML6101X242XX ML6101X252XX ML6101X262XX ML6101X272XX ML6101X282XX ML6101X292XX ML6101X302XX ML6101X312XX ML6101X322XX ML6101X332XX ML6101X342XX ML6101X352XX ML6101X362XX ML6101X372XX ML6101X382XX ML6101X392XX ML6101X402XX ML6101X412XX ML6101X422XX ML6101X432XX ML6101X442XX ML6101X452XX ML6101X462XX ML6101X472XX ML6101X482XX ML6101X492XX ML6101X502XX ML6101X512XX ML6101X522XX ML6101X532XX ML6101X542XX ML6101X552XX ML6101X562XX ML6101X572XX ML6101X582XX ML6101X592XX ML6101X602XX Operating Voltage VIN (V) MIN. MAX. Pch Output Current Pch IOUT (mA) Condition TYP. Nch Output Current Nch IOUT (mA) Condition TYP. Transient Delay Time tDLY (ms) MAX. VDS = 0.5V VIN = 1.0V 1.0 VDS = 0.5V VIN = 2.0V 3.0 VDS = 2.1V 0.8V 10V VIN = 8.0V -10.0 VDS = 0.5V VIN = 3.0V 5.0 0.2 VDS = 0.5V VIN = 4.0V 11.0 VDS = 0.5V VIN = 5.0V 13.0 P4/11 Rev. A, June 2005 ML6101 Pin Configuration SOT-23-3 SOT-89-3 TO-92 Package Pin Number SOT-23-3 SOT-89-3 TO-92 1 1 1 3 2 2 2 3 3 Pin Name VOUT VIN VSS Function Supply Voltage Output Supply Voltage Input Ground P5/11 Rev. A, June 2005 ML6101 Functional Description (Refers to CMOS Output) 1. Firstly, when the Input Voltage (VIN) falls 4. When the Input Voltage (VIN) falls below below the Minimum Operating Voltage the Monitor Release Voltage (VMR) level, (VMIN) level, output becomes unstable. In output at the Output pin (VOUT) is equal to the case of N-channel open drain Ground Voltage (VSS) level until the Input configuration, as the output pin is Voltage (VIN) reaches the Minimum generally pulled-up, the output will be Operating Voltage (VMIN) level. equal to the pull-up voltage. 5. When the Input Voltage (VIN) falls below 2. When the Input Voltage (VIN) rises, output the Minimum Operating Voltage (VMIN) become stable once the voltage has level, output becomes unstable. In the case exceeded VMIN. The Output Voltage (VOUT) of N-channel open drain configuration, as will remain equal to the Ground Voltage the output pin is generally pulled-up, the (VSS) level until the Input Voltage (VIN) output will be equal to the pull-up reaches the Monitor Voltage (VMON) level. voltage. 3. When a voltage higher than the Monitor Voltage (VMON) is applied to the Input Notes : Voltage pin (VIN), output at VOUT will be 1. The difference between VMR and VMF equal to the input at the VIN pin. High represents the Hysteresis Range. impedance exists on the Output pin (VOUT) with the N-channel open drain configuration. If the pin is pulled-up. VOUT will be identical to the pull-up voltage. Timing Diagram Input Voltage (VIN ) Monitor Voltage (VMON ) Monitor Release Voltage (VMR ) Minimum Operating Voltage (VMIN ) Ground Voltage (VSS ) Output Voltage (VOUT ) Ground Voltage (VSS ) 1 2 3 4 5 P6/11 Rev. A, June 2005 ML6101 Ordering Information Designator a Description Output Configuration C = CMOS Output N = N-Channel Output Detect Voltage eg. 30=3.0V 50=5.0V Detect Voltage Accuracy 2 = +2.0% 3 = +3.0% Package Type M = SOT-23-3 P = SOT-89 T = TO-92 b c d e Device Orientation R = Embossed Tape (Orientation of Device : Right) L = Embossed Tape (Orientation of Device : Left) B = Bag (TO-92) H = Paper Tape (TO-92) G = Lead Free Part G Marking SOT-23-3 : Designator 1 Description Type A = Voltage Detector (CMOS Output) B = Voltage Detector (N-channel Output) Output Voltage eg. 30 = 3.0V Internal Code 2,3 4 SOT-89 : Designator 1 Description Type A = Voltage Detector (CMOS Output) B = Voltage Detector (N-channel Output) Output Voltage eg. 30 = 3.0V Internal Code 2,3 4 TO-92 : Designator 1 Description Type A = Voltage Detector (CMOS Output) B = Voltage Detector (N-channel Output) Output Voltage eg. 30 = 3.0V Internal code Year Code eg. 05 = Year 2005 Week Code eg. 30 = Week 30 2,3 4 5, 6 7, 8 P7/11 Rev. A, June 2005 ML6101 Packaging Information (0.8) SOT-89 : 0.15 -0.1 -0.05 4.5 ± 0.1 1.5 ± 0.1 SOT-23-3 -0.1 0.4 -0.05 1.72 ± 0.1 2.45 ± 0.15 0 ~ 0.1 2.8 ± 0.2 1.6 +1.2 -0.0.1 (0.95) min. 0.2 0.42 ± 0.06 0.42 ± 0.06 0.49 ± 0.06 1.1 mm 4.25 max 0.4 ± 0.04 1.9 ± 0.2 2.9 ± 0.2 1.1 ± 0.1 1.5 ± 0.1 1.5 ± 0.1 1.27 1.27 ∅5.2 max 4.2 max TO-92 : Units : mm 5.3 max Recommended Pattern Layout SOT-23 : 2.4 12.7 min SOT-89 0.9 2.2 45º 45º 1.9 1.0 1.5 0.8 1. 0 1.0 P8/11 1.6 Rev. A, June 2005 3.7 ML6101 Tape and Reel Information SOT-23 : SIZE (mm) A B C D G H ∅ 178 ± 0.8 2 ± 0.2 ∅ 13 ± 0.2 ∅ 21 ± 0.8 8 ± 0.5 ∅ 60 3,000 pcs / reel SOT-23 Taping Specifications : 4 ± 0.1 2 ± 0.05 ∅1.5 + 0.1 -0 3.5 ± 0.05 1.75 ± 0.1 4 ± 0.1 ∅ 1.1 ± 0.1 Direction of feed 8 ± 0.2 Direction of feed “R” type [Orientation of Device: Right] Standard Type “L” type [Orientation of Device: Left] Reverse Type P9/11 Rev. A, June 2005 ML6101 SOT-89 : SIZE (mm) A B C D G H ∅ 178 ± 0.8 2 ± 0.2 ∅ 13 ± 0.2 ∅ 21 ± 0.8 12 ± 0.5 ∅ 60 1,000 pcs / reel SOT-89 Taping Specifications : 4.0 ± 0.1 2.0 ± 0.05 ∅ 1.5 + 0.1 0 5.65 ± 0.05 1.5 ± 0.1 8.0 ± 0.1 Direction of feed 12.0 ± 0.2 Direction of feed “R” type [Orientation of Device: Right] Standard Type “L” type [Orientation of Device: Left] Reverse Type P10/11 Rev. A, June 2005 ML6101 TO-92 Taping Specifications : P H1 H L1 H0 WO W2 W1 W P2 F PO D t SIZE (mm) P PO P2 F W WO W1 W2 H H0 H1 D t L1 12.7 ± 1.0 12.7 ± 0.3 6.35 ± 0.4 2.5+ 0.45 - 0.15 2,000 pcs / box 18.0 ± 1.0 6.0 ± 0.3 9.0 ± 0.5 0.5 MAX 19.0 ± 0.5 16.0 ± 0.5 32.25 MAX ∅ 4.0 ± 0.2 0.6 ± 0.2 3.5 MIN The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. P11/11 Rev. A, June 2005