AAF-03S12

AAF-03 SERIES AC-DC Power Module 3W FEATURES ►Ultra Compact Size 1.0" x 1.0" x 0.64" ►Fully Encapsulated Plastic Case for PCB Mounting ►Universal Input 85-264VAC ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -25°C to +70°C ►No Min. Load Requirement ►Overload/Voltage and Short Circuit Protection ►EMI Emission EN 55032/14-1 Class B Approved ►EMS Immunity EN 61000-4-2,3,4,5,6,8,11 Approved ►Eco Design, Low No Load Power Consumption < 150mW ►UL/cUL/IEC/EN 62368-1(60950-1), TUV/IEC/EN 60335-1 Safety Approval & CE Marking PRODUCT OVERVIEW The AAF-03 Series from MINMAX is a range of ultra-small, fully encapsulated 3 Watt AC-DC power supply modules. They are designed for easy PCB mounting with solder pins. The modules feature EMI emission EN 55032/14-1 Class B approved. EMC immunity complies with EN 61000-6-1. The low stand-by power consumption complies with European ErP Directive 2009/125/EC. This series comply with international standard pinout and input voltage range of 85-264VAC for worldwide markets. The AAF-03 series provide a better solution for space critical applications in consumer appliances and instrumentation and communication equipment. Model Selection Guide Model Number Output Voltage Output Current Input Current Max. capacitive Load Efficiency (typ.) Max. Peak(1) @Max. Load VDC mA mA mA(typ.) µF @Max. Load % AAF-03S03 3.3 900 1170 62 1200 70 AAF-03S05 5 600 780 61 820 72 AAF-03S09 9 333 430 57 470 77 AAF-03S12 12 250 320 56 330 78 AAF-03S15 15 200 260 56 270 78 AAF-03S24 24 125 160 56 180 78 Input Specifications Parameter Conditions / Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:sales@minmax.com.tw 2023/12/12 REV:13 Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 63 Hz 120 --- 370 VDC --- --- 150 mW 115VAC --- --- 15 A 230VAC --- --- 25 A Tel:886-6-2923150 Page 1 of 3 www.minmaxpower.com AAF-03 SERIES AC-DC Power Module 3W Output Specifications Parameter Conditions Output Voltage Accuracy Min. Typ. Max. Unit --- --- ±2.0 %Vnom. % Line Regulation Vin=Min. to Max. @Full Load --- --- ±1.0 Load Regulation Io=0% to 100% --- --- ±1.0 % Ripple & Noise 0-20 MHz Bandwidth --- --- 70 mV P-P --- 125 --- % of Vo Temperature Coefficient --- --- ±0.05 %/℃ Overshoot --- --- 5 %Vout 135 150 --- %Inom. Minimum Load No minimum Load Requirement Over Voltage Protection Zener Diode Clamp Hiccup mode, auto-recovery Over Load Protection (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, Automatic Recovery General Specifications Parameter I/O Isolation Voltage Conditions Min. Typ. Max. Unit 60 Seconds 3000 --- --- VAC 500 VDC 100 --- --- MΩ --- 65 --- kHz 8 --- I/O Isolation Resistance Switching Frequency Hold-up Time 115VAC, Full Load MTBF (calculated) --- MIL-HDBK-217F@25℃, Ground Benign 1,200,000 ms Hours UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1 (CB-report) Safety Approvals UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1 (CB-report) IEC/EN 60335-1 recognition (CB-report, TUV certificate) EMC Specifications Parameter Standards & Level Conduction EMI EN 55014-1, EN 55032 Radiation Performance Without external components Class B EN 55014-2, EN 55035 ESD EN 61000-4-2 Air ± 8kV, Contact ± 4kV A Radiated immunity EN 61000-4-3 10V/m A Fast transient EN 61000-4-4 ±2kV A Surge EN 61000-4-5 ±1kV A Conducted immunity EN 61000-4-6 10Vrms A PFMF EN 61000-4-8 30A/m A Dips EN 61000-4-11 30% 10ms A Interruptions EN 61000-4-11 >95% 5000ms B EMS Environmental Specifications Min. Max. Unit Operating Ambient Temperature Range Parameter Conditions -25 +70 ℃ Storage Temperature Range -40 +85 Power Derating +60℃ to +70℃ ℃ W/℃ 0.15 Humidity (non condensing) --- 95 % rel. H Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ Notes 1 2 3 4 5 Peak load lasting