AAF-05S05

AAF-05 SERIES AC-DC Power Module 5W FEATURES ►Ultra Compact Size 1.0 x 1.0 x 0.64" ►Fully Encapsulated Plastic Case for PCB and Chassis Mounting Version ►Universal Input 85-264VAC ►I/O Isolation 3000VAC with Reinforced Insulation ►No Min. Load Requirement ►Operating Ambient Temp. Range -25℃ to +70℃ ►Overload/Voltage and Short Circuit Protection ►EMI Emission EN 55032/14-1 Class B Approved ►EMS Immunity EN 61000-4-2,3,4,5,6,8,11 Approved ►Eco Design, No Load Input Power 300mW max. ►Safety Approval to UL/cUL/IEC/EN 62368-1(60950-1), TUV IEC/EN 60335-1 & CE Marking PRODUCT OVERVIEW The AAF-05 Series from MINMAX is a range of ultra-small, fully encapsulated 5 Watt AC-DC power supply modules. They are designed for easy PCB mounting with solder pins. The modules feature EMI emission EN 55032/14-1 Class B approved. EMC immunity complies with EN 61000-6-1. The low stand-by power consumption complies with European ErP Directive 2009/125/EC. This series comply with international standard pinout and input voltage range of 85-264VAC for worldwide markets. The AAF-05 power supplies provide a better solution for space critical applications in consumer appliances and instrumentation and communication equipment. Model Selection Guide Model Number Output Voltage Output Current Input Current Max. Capacitive Load Efficiency (typ.) Max. Peak(1) @Max. Load VDC mA mA mA(typ.) µF @Max. Load % AAF-05S03 3.3 1515 1970 117 2200 74 AAF-05S05 5 1000 1300 108 1000 80 AAF-05S09 9 555 721 106 300 82 AAF-05S12 12 416 540 106 160 82 AAF-05S15 15 333 433 104 100 83 AAF-05S24 24 208 270 104 43 83 AAF-05S48 48 104 135 102 10 85 Input Specifications Parameter Conditions / Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:sales@minmax.com.tw 2023/12/12 REV:11 Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 63 Hz 120 --- 370 VDC --- --- 300 mW 115VAC --- --- 20 A 230VAC --- --- 40 A Tel:886-6-2923150 Page 1 of 4 www.minmaxpower.com AAF-05 SERIES AC-DC Power Module 5W Output Specifications Parameter Conditions / Model Output Voltage Accuracy Min. Typ. Max. Unit --- --- ±2.0 %Vnom. % Line Regulation Vin=Min. to Max. @Full Load --- --- ±1.0 Load Regulation Io=0% to 100% --- --- ±1.0 % 3.3V & 5VDC Output Models --- --- 60 mV P-P Other Output Models --- --- 1 %VPP of Vo % of Vo Ripple & Noise 0-20 MHz Bandwidth Minimum Load No minimum Load Requirement Over Voltage Protection --- 125 --- Temperature Coefficient Zener Diode Clamp --- --- ±0.05 %/℃ Overshoot --- --- 5 %Vout 135 150 --- %Inom. Hiccup mode, auto-recovery Over Load Protection (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, Automatic Recovery General Specifications Parameter I/O Isolation Voltage Conditions Min. Typ. Max. Unit 60 Seconds 3000 --- --- VAC 500 VDC 100 --- --- MΩ --- 65 --- kHz ms I/O Isolation Resistance Switching Frequency 115VAC, Full Load --- 8 --- 230VAC, Full Load --- 40 --- ms MIL-HDBK-217F@25℃, Ground Benign 520,000 --- --- Hours Hold-up Time MTBF (calculated) UL/cUL 60950-1 recognition(UL certificate), IEC/EN 60950-1(CB-report) Safety Approvals UL/cUL 62368-1 recognition(UL certificate), IEC/EN 62368-1(CB-report) IEC/EN 60335-1 recognition(CB-report, TUV certificate) EMC Specifications Parameter Standards & Level Conduction EMI Radiation EN 55014-1, EN 55032 Performance Without external components Class B EN 55014-2, EN 55035 EMS E-mail:sales@minmax.com.tw 2023/12/12 REV:11 ESD EN 61000-4-2 Air ± 8kV, Contact ± 4kV A Radiated immunity EN 61000-4-3 10V/m A Fast transient EN 61000-4-4 ±2kV A Surge EN 61000-4-5 ±1kV A Conducted immunity EN 61000-4-6 10Vrms A PFMF EN 61000-4-8 30A/m A Dips EN 61000-4-11 30% 10ms A Interruptions EN 61000-4-11 >95% 5000ms B Tel:886-6-2923150 Page 2 of 4 www.minmaxpower.com AAF-05 SERIES AC-DC Power Module 5W Environmental Specifications Parameter Conditions Operating Ambient Temperature Range Power Derating Min. Max. -25 +70 +50℃ to +70℃ Unit ℃ W/℃ 0.125 Storage Temperature Range -40 +85 ℃ Humidity (non condensing) --- 95 % rel. H Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ Notes 1 2 3 4 5 6 Peak load lasting