ABF-04S05

ABF-04 SERIES AC-DC Power Module 4W FEATURES ►Fully Encapsulated Plastic Case for PCB Mounting ►Universal Input 85-264VAC, 47-440Hz ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -25℃ to +60℃ ►No Min. Load Requirement ►Overload/Voltage and Short Circuit Protection ►EMI Emission EN55032 Class B Approved ►EMC Immunity EN 61000-4-2,3,4,5,6,8,11 Approved ►Eco Design, Compliant to Energy Star Specification and ErP Directive 2009/125/EC ►UL/cUL/IEC/EN (62368-1)60950-1 Safety Approval & CE Marking PRODUCT OVERVIEW The MINMAX ABF-04 series is a range of fully encapsulated AC-DC power supply modules. They are designed for direct PCB mounting with solder pins. The product features EMI emission EN 55032 Class B approved and EMS compliance to the EN 61000-4 standard. This series comply with international standard pinout and input voltage range of 85-264VAC for worldwide markets. The ABF-04 series provides a better superior solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Output Voltage Model Number Output Current Input Current Max. capacitive Load Efficiency (typ.) Max. @Max. Load VDC mA mA(typ.) μF @Max. Load % ABF-04S03 3.3 1200 82 1200 70 ABF-04S05 5 800 82 800 72 ABF-04S09 9 444 77 440 75 ABF-04S12 12 333 76 330 76 ABF-04S15 15 267 76 260 76 ABF-04S24 24 167 76 160 77 +5 600 +3.3 150 +12 250 +5 120 ABF-04D12 ±12 ±166 76 # 330 77 ABF-04D15 ±15 ±133 76 # 260 77 ABF-04D53 ABF-04D125 5600 72 72 4700 330 72 75 4700 # For each output Input Specifications Parameter Conditions / Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption 115VAC Inrush Current 230VAC E-mail:sales@minmax.com.tw 2024/01/10 REV:15 Cold Start at 25℃ Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC --- --- 0.3 W --- --- 15 A --- --- 25 A Tel:886-6-2923150 Page 1 of 3 www.minmaxpower.com ABF-04 SERIES AC-DC Power Module 4W Output Specifications Parameter Conditions / Model Min. Typ. Max. Unit Single and Dual Output Models --- ±1.0 ±2.0 %Vnom. ABF-04D53 & ABF-04D125 --- ±2.0 ±5.0 %Vnom. Single and Dual Output Models --- ±0.5 ±1.0 % Vo1 --- ±0.5 ±1.0 % Vo2 --- ±1.0 ±3.0 % 3.3VDC Output Model --- ±1.0 ±1.5 % 5~24VDC and Dual Output Models --- ±0.5 ±1.0 % Vo1 --- ±0.5 ±1.0 % Vo2 --- ±2.5 ±5.0 % 3.3V & 5VDC Output Models --- 100 150 mV P-P --- 0.8 1.0 %VPP of Vo Single Output and Dual +/- Output Models No min. Load required --- --- %Inom. Dual +/+ Output Models --- 25 --- %Inom. Zener diode clamp --- 120 --- % of Vo Temperature Coefficient --- ±0.01 ±0.02 %/℃ Overshoot --- --- 5 %Vout 105 --- --- %Inom. Output Voltage Setting Accuracy Line Regulation ABF-04D53 & ABF-04D125 Load Regulation ABF-04D53 & ABF-04D125 Ripple & Noise 0-20 MHz Bandwidth Other Output Models Minimum Load Over Voltage Protection Hiccup mode, auto-recovery Over Load Protection (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, Automatic Recovery General Specifications Parameter I/O Isolation Voltage Conditions Min. Typ. Max. Unit Input to Output, 60 Seconds 3000 --- --- VAC 500 VDC I/O Isolation Resistance 100 --- --- MΩ Switching Frequency --- 130 --- kHz Hold-up Time --- 20 --- ms MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 330,000 Hours UL/cUL 60950-1 recognition(UL certificate) , IEC/EN 60950-1(CB-report) Safety Approvals UL/cUL 62368-1 recognition(UL certificate), IEC/EN 62368-1(CB-report) EMC Specifications Parameter Standards & Level Conduction EMI Radiation EN 55032 Performance Without external components Class B EN 55035 EMS E-mail:sales@minmax.com.tw 2024/01/10 REV:15 ESD EN 61000-4-2 air ± 8kV , Contact ± 4kV B Radiated immunity EN 61000-4-3 10V/m A Fast transient EN 61000-4-4 ±2kV B Surge EN 61000-4-5 ±1kV B Conducted immunity EN 61000-4-6 10Vrms B PFMF EN 61000-4-8 30A/m A Dips EN 61000-4-11 30% 10ms B Interruptions EN 61000-4-11 >95% 5000ms C Tel:886-6-2923150 Page 2 of 3 www.minmaxpower.com ABF-04 SERIES AC-DC Power Module 4W Environmental Specifications Parameter Conditions Operating Ambient Temperature Range Power Derating Min. Typ. Max. -25 --- +60 +50℃ to +60℃ Unit ℃ W/℃ 0.3 -40 --- +85 ℃ Shutdown, Internal IC Junction Temperature --- 142 --- ℃ Automatic Recovery, Internal IC Junction Temperature --- 67 --- ℃ Humidity (non condensing) --- --- 95 % rel. H Lead Temperature (1.5mm from case for 10Sec.) --- --- 260 ℃ Storage Temperature Range Thermal Shutdown Notes 1 2 3 4 5 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact MINMAX. Specifications are subject to change without notice. Package Specifications Mechanical Dimensions Pin Connections Pin Single Output 1 4 14.00 [0.551] 25.25 [0.994] 5 Bottom View 7.50 [0.295] 6 7.50 [0.295] 1 D53/D125 NC 2 36.5 [1.44] 3 2x3.75 [2x0.148] 2 D12/D15 Diameter mm (inches) Ø 0.6 [0.02] NC Ø 0.6 [0.02] 3 +Vout +Vout +Vout1 Ø 0.6 [0.02] 4 -Vout Common Common Ø 0.6 [0.02] 5 No Pin -Vout +Vout2 Ø 0.6 [0.02] 6 AC(N) Ø 0.6 [0.02] 7 AC(L) Ø 0.6 [0.02] 21.00 [0.827] 3.00 [0.118] 27.0 [1.06] 3.75 [0.148] 7 4.0 [0.16] 17.1 [0.67] ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.01) ►Pin pitch tolerance: ±0.25 (±0.01) ►Pin diameter tolerance: X.X±0.1 (X.XX±0.004) Physical Characteristics Case Size : 36.5x27.0x17.1mm (1.44x1.06x0.67 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy Weight : 30g No. 77, Sec. 1, Zhonghua W. Rd., South Dist., Tainan City 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw Minmax Technology Co., Ltd. 2024/01/10 REV:15 Page 3 of 3