AJM-24S05

AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety FEATURES ►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85~264VAC, 47~440Hz ►I/O Isolation 4000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -40℃ to +80℃ ►Overload/Voltage and Short Circuit Protection ►EMI Emission EN 55011/32 Class B Approved ►EMC Immunity EN 61000-4-2,3,4,5,6,8,11 Approved ►Medical EMC Standard with 4th Edition of EMI EN 55011 & EMS EN 60601-1-2 Approved ►Medical Safety with 2xMOPP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES 60601-1 Approved ►UL508 Safety Approval Specifically for Industrial Application ►UL/cUL/IEC/EN 62368-1(60950-1) Safety Approval & CE Marking PRODUCT OVERVIEW The new MINMAX AJM-24 series is a range of fully encapsulated AC-DC power modules. These high performance products feature an extended operating temperature range of -40℃ to +80℃. Universal input voltage 85-264VAC and UL/IEC/EN safety approvals including medical safety and UL 508 listing qualify these power supplies modules for applications in products with worldwide markets EMI Emission EN 55011/32 Class B Approved. The AJM-24 series power modules provide a perfect solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number Output Voltage Output Current Input Current 115VAC, 60Hz VDC 5 9 12 15 24 ±12 ±15 mA 3000 2666 2000 1600 1000 ±1000 ±800 Efficiency (typ.) 230VAC, 50Hz @Max. Load Max. AJM-24S05 AJM-24S09 AJM-24S12 AJM-24S15 AJM-24S24 AJM-24D12 AJM-24D15 Max. capacitive Load @Max. Load, 115VAC mA(typ.) 282 424 419 424 409 414 414 µF 2200 1000 1000 680 470 470# 330# # For each output 169 255 252 255 246 249 249 % 77 82 83 82 85 84 84 Input Specifications Parameter Conditions / Model AC Voltage Input Range Input Frequency Range All Models DC Voltage Input Range No-Load Power Consumption 115VAC Inrush Current 230VAC E-mail:sales@minmax.com.tw 2022/04/08 REV:7 Tel:886-6-2923150 Page 1 of 5 Cold Start at 25℃ Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC --- --- 0.3 W --- --- 20 A --- --- 40 A AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety Output Specifications Parameter Output Voltage Setting Accuracy Line Regulation Conditions / Model Min. Typ. --±2.0 Vin=Min. to Max. @Full Load --±0.5 Single Output Model --±0.5 Io=0% to 100% Dual Output Models --±2.5 No minimum Load Requirement 1.5 5V Output Models --0-20 MHz Bandwidth Other Output Models --1.0 Zener diode clamp 120 --±0.02 ----85VAC, Hiccup Mode, auto-recovery 105 --(long term overload condition may cause damage) Hiccup mode, Automatic Recovery Load Regulation Minimum Load Ripple & Noise Over Voltage Protection Temperature Coefficient Overshoot Over Load Protection Short Circuit Protection Max. --------- Unit %Vnom. % % % 1.8 1.3 --5 %VPP of Vo %VPP of Vo % of Vo %/℃ % --- %Inom. General Specifications Parameter I/O Isolation Voltage Leakage Current I/O Isolation Resistance Switching Frequency Typ. Max. Unit ----VAC 80 --µA 500 VDC ----MΩ 132 --kHz 115VAC, 60Hz 20 --ms 230VAC, 50Hz 80 --ms MIL-HDBK-217F@25℃, Ground Benign 400,000 Hours UL/cUL 60950-1, CSA C22.2 No 60950-1 ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No. 60601-1 IEC/EN 60950-1, IEC/EN 60601-1 3rd Edition 2xMOPP UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1 (CB-report) UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1 (CB-report) ANSI/AAMI ES60601-1 2xMOPP recognition (UL certificate), IEC/EN 60601-1 3rd Edition (CB-report) Hold-up Time MTBF (calculated) Safety Standards Safety Approvals Conditions Reinforced Insulation, Rated For 60 Seconds Min. 4000 --1000 ------- Conditions / Model Min. -40 -----40 ------- Typ. --------142 67 --- Max. +80 0.75 1.2 +95 ----95 Unit ℃ W/℃ W/℃ ℃ ℃ ℃ % rel. H --- --- 260 ℃ Environmental Specifications Parameter Operating Ambient Temperature Range Power Derating Above +65℃ 5V Output Models Other Models Storage Temperature Range Shutdown, Internal IC Junction Temperature Automatic Recovery, Internal IC Junction Temperature Thermal Shutdown Humidity (non condensing) Lead Temperature (1.5mm from case for 10Sec.) E-mail:sales@minmax.com.tw 2022/04/08 REV:7 Tel:886-6-2923150 Page 2 of 5 AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety EMC Specifications Parameter Standards & Level Performance Conduction EN 55011, EN 55032, EN 61000-6-4, Without external components Class B EN 61000-6-3 Radiation th EN 60601-1-2 4 , EN 55024, EN 61000-6-2, EN 61000-6-1 ESD EN 61000-4-2 Air ± 15kV, Contact ± 8kV A Radiated immunity EN 61000-4-3 10V/m A Fast transient EN 61000-4-4 ±2kV A Surge EN 61000-4-5 ±1kV A EN 61000-4-6 10Vrms Conducted immunity A EN 61000-4-8 30A/m PFMF A EN 61000-4-11 0% of 230VAC 0.5 cycle Dips & Interruptions A 0% of 230VAC 1 cycle A 70% of 230VAC 25/30 cycle A 0% of 230VAC 250/300 cycle B EMI EMS Notes 1 2 3 4 5 6 This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. Safety approvals cover frequency 47-63 Hz. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact MINMAX. Specifications are subject to change without notice. E-mail:sales@minmax.com.tw 2022/04/08 REV:7 Tel:886-6-2923150 Page 3 of 5 AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 19.5 [0.77] 6.0 [0.24] 8.89 [0.35] 11.43 [0.45] 6 7 5 0.7 [0.03] 8.89 [0.35] 11.43 [0.45] 3 4 6.3 [0.25] 41.4 [1.63] 2 5.0 [0.20] 46.0 [1.81] Bottom View 74.0 [2.91] 6.3 [0.25] 62.00 [2.44] Mounting M4.0 Thread 1 Pin Single Output Dual Output Diameter mm (inches) 1 AC (N) AC (N) Ø 1.0 [0.04] 2 AC (L) AC (L) Ø 1.0 [0.04] 3 No Pin No Pin Ø 1.0 [0.04] 4 -Vout -Vout Ø 1.0 [0.04] 5 No Pin Common Ø 1.0 [0.04] 6 +Vout +Vout Ø 1.0 [0.04] 7 No Pin No Pin Ø 1.0 [0.04] ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) ►Pin pitch tolerance: ±0.25 (±0.01) ►Pin diameter tolerance: X.X±0.1 (X.XX±0.004) 20.32 [0.80] 54.0 [2.13] Physical Characteristics Case Size : 74.0x54.0x19.5mm (2.91x2.13x0.77 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy Weight : 137g Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Indication LED Top view 46.0 [1.81] 7 6 5 4 3 2 1 54.0 [2.13] 4XØ3.5 DCON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 10.0 [0.39] Single Output Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 NC NC 4 -Vout -Vout 5 NC Common 6 +Vout +Vout 7 NC NC NC: No Connection 5.0 [0.20] Note: Screw type Terminal: Wires 1.5mm2 max. Recommended Terminal Screw tightening torque: 0.5Nm (3.5lb.in.) max. Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 147g E-mail:sales@minmax.com.tw 2022/04/08 REV:7 Tel:886-6-2923150 Page 4 of 5 16.8 [0.66] 23.3 [0.92] 76.0 [2.99] Pin ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety Package Specifications with DIN Rail Mounting Bracket Mechanical Dimensions Indication LED Top view 46.0 [1.81] 7 6 5 4 3 2 1 54.0 [2.13] 4XØ3.5 DCON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 3.0 [0.12] 23.3 [0.92] 11.0 [0.43] 16.8 [0.66] 10.0 [0.39] 5.0 [0.20] 76.0 [2.99] 12.7 [0.50] Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 201g DIN-Rail Mounting Bracket (Order code for Kit : AC-DIN-01) Order Code Table PCB Mounting AJM-24S05 Chassis Mounting AJM-24S05C AJM-24S05C With DIN Rail Mounting by two Order Code AC-DIN-01 AJM-24S09 AJM-24S09C AJM-24S09C AC-DIN-01 AJM-24S12 AJM-24S12C AJM-24S12C AC-DIN-01 AJM-24S15 AJM-24S15C AJM-24S15C AC-DIN-01 AJM-24S24 AJM-24S24C AJM-24S24C AC-DIN-01 AJM-24D12 AJM-24D12C AJM-24D12C AC-DIN-01 AJM-24D15 AJM-24D15C AJM-24D15C AC-DIN-01 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw Minmax Technology Co., Ltd. 2022/04/08 REV:7 Page 5 of 5