AKF-15D15C

AKF-15 SERIES AC-DC Power Module 15W FEATURES ►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85-264VAC, 47-440Hz ►Single, Dual and Triple Outputs ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -25℃ to +70℃ ►Overload/Voltage and Short Circuit Protection ►EMI Emission EN55011/32 Class B Approved ►EMC Immunity EN 61000-4-2,3,4,5,6,8,11 Approved ►UL508 Safety Approval (Option) Specifically for Industrial Application ►UL/cUL/IEC/EN 62368-1(60950-1) Safety Approval & CE Marking PRODUCT OVERVIEW The MINMAX AKF-15 series is a range of fully encapsulated AC-DC power supply modules. The product features EMI emission EN 55011/32 class B approved and EMS compliance to EN 61000-4 standard. This series comply with international standard pinout and input voltage range of 85-264VAC for worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval. The AKF-15 series provide a better solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output Voltage Output Current Input Current Max. capacitive Load Efficiency (typ.) 115VAC, 60Hz Max. @Max. Load @No Load VDC mA mA(typ.) mA(typ.) µF % AKF-15S05 5 3000 290 30 3900 75 AKF-15S12 12 1250 275 30 2200 79 AKF-15S15 15 1000 275 30 2200 79 AKF-15S24 24 625 275 30 1000 79 AKF-15S48 48 310 273 30 680 79 AKF-15D12 ±12 ±650 275 30 #1500 79 AKF-15D15 ±15 ±500 275 30 #1500 79 5 1500 *12 625 AKF-15D512 AKF-15T512 AKF-15T515 5 2000 *12 200 *-12 -200 *5 2000 *15 150 *-15 -150 * Output voltage accuracy 4% max. E-mail:sales@minmax.com.tw 2023/12/27 REV:28 302 30 290 30 @Max. Load 2000 1500 72 2200 1500 74 1500 2200 284 30 1500 74 1500 # For each output Tel:886-6-2923150 Page 1 of 5 www.minmaxpower.com AKF-15 SERIES AC-DC Power Module 15W Input Specifications Parameter Conditions / Model Input Voltage Range Input Frequency Range All Models Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC --- --- 15 A --- --- 30 A Min. Typ. Max. Unit --- ±1.0 ±2.0 % --- ±0.5 ±1.0 % Single Output Models --- ±0.5 ±1.0 % Dual/ Triple Output Models --- ±2.5 ±5.0 % --- ±1.0 --- % --- ±2.5 --- % --- ±2.5 --- % 5VDC Output Models --- 1.5 1.8 %VPP of Vo Other Output Models --- 0.8 1.0 %VPP of Vo --- 10 --- %Inom. % of Vo Input Voltage Range 115VAC Inrush Current Min. Cold Start at 25℃ 230VAC Output Specifications Parameter Conditions / Model Output Voltage Accuracy Line Regulation Vin=Min. to Max. @Full Load Load Regulation Io=10% to 100% Vo1 Cross RegulationDual Positives / Triple Output Vo2 Vo3 Ripple & Noise Measured output Io = 20% to 100% of rated load Other output(s) set at 50% of rated load 0-20 MHz Bandwidth Minimum Load Over Voltage Protection --- 120 --- Temperature Coefficient Zener diode clamp --- ±0.01 ±0.02 %/℃ Overshoot --- --- 5 % Vout 105 --- --- %Inom. Hiccup mode, auto-recovery Over Load Protection (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, Automatic Recovery General Specifications Parameter I/O Isolation Voltage Conditions Min. Typ. Max. Unit Input to Output, 60 Seconds 3000 --- --- VAC 500 VDC 100 --- --- MΩ --- 100 --- kHz 20 --- I/O Isolation Resistance Switching Frequency Hold-up Time --- MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 280,000 ms Hours UL/cUL 60950-1 recognition(UL certificate), IEC/EN 60950-1(CB-report) Safety Approvals UL/cUL 62368-1 recognition(UL certificate), IEC/EN 62368-1(CB-report) UL/cUL 508 listed certificate EMC Specifications Parameter Standards & Level Conduction EMI Radiation EN 55011, EN 55032, EN 61000-6-4, EN 61000-6-3 Performance Without external components Class B EN 55035, EN 61000-6-2, EN 61000-6-1 EMS E-mail:sales@minmax.com.tw 2023/12/27 REV:28 ESD EN61000-4-2 air ± 8kV, Contact ± 4kV B Radiated immunity EN 61000-4-3 10V/m A Fast transient EN 61000-4-4 ±2kV B Surge EN 61000-4-5 ±1kV B Conducted immunity EN 61000-4-6 10Vrms B PFMF EN 61000-4-8 30A/m A Dips EN 61000-4-11 30% 10ms B Interruptions EN 61000-4-11 >95% 5000ms C Tel:886-6-2923150 Page 2 of 5 www.minmaxpower.com AKF-15 SERIES AC-DC Power Module 15W Environmental Specifications Parameter Conditions Operating Ambient Temperature Range Min. Typ. Max. -25 --- +70 +50℃ to +70℃ Power Derating Unit ℃ W/℃ 0.563 -40 --- +85 ℃ Shutdown, Internal IC Junction Temperature --- 140 --- ℃ Automatic Recovery, Internal IC Junction Temperature --- 65 --- ℃ Humidity (non condensing) --- --- 95 % rel. H Lead Temperature (1.5mm from case for 10Sec.) --- --- 260 ℃ Storage Temperature Range Thermal Shutdown Notes 1 2 3 4 5 All Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. We recommend to protect the converter by a slow blow fuse in the input supply line. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. Other input and output voltage may be available, please contact MINMAX. Specifications are subject to change without notice E-mail:sales@minmax.com.tw 2023/12/27 REV:28 Tel:886-6-2923150 Page 3 of 5 www.minmaxpower.com AKF-15 SERIES AC-DC Power Module 15W Package Specifications PCB Mounting Mechanical Dimensions 8.89 [0.350] Pin Connections 11.43 [0.450] 11.43 [0.450] 19.5 [0.77] 0.7 [0.03] 6.0 [0.24] 8.89 [0.350] Pin Dual Single 1 6 5 4 3 7.1 [0.28] No Pin Ø 1.0 [0.04] -Vout3 Ø 1.0 [0.04] 4 -Vout -Vout -Vout2 Common Ø 1.0 [0.04] 5 No Pin Common +Vout2 +Vout2 Ø 1.0 [0.04] 6 +Vout +Vout -Vout1 -Vout1 Ø 1.0 [0.04] +Vout1 +Vout1 Ø 1.0 [0.04] 7 No Pin 2 5.0 [0.20] 46.0 [1.81] Bottom View Diameter mm (inches) Ø 1.0 [0.04] AC(L) – AC Line 3 74.0 [2.91] 39.8 [1.57] 7.1 [0.28] 62.00 [2.441] Mounting M4.0 Thread Triple AC(N) – AC Neutral 2 O1.0 [O0.04] 7 Dual (D512) (D12,D15) 1 ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) ►Pin pitch tolerance: ±0.25 (±0.01) ►Pin diameter tolerance: X.X±0.1 (X.XX±0.004) 20.32 [0.800] 54.0 [2.13] Physical Characteristics Case Size : 74.0x54.0x19.5mm (2.91x2.13x0.77 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy Weight : 135g Package Specifications Chassis Mounting with screw terminal (order code suffix C) Mechanical Dimensions Connections Terminal 4XØ3.5 Dual (D12,D15) Single 2 1 DCON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] -Vout3 -Vout -Vout -Vout2 Common 5 NC Common +Vout2 +Vout2 6 +Vout +Vout -Vout1 -Vout1 +Vout1 +Vout1 7 10.0 [0.39] NC NC NC: No Connection 5.0 [0.20] 16.8 [0.66] 23.3 [0.92] 76.0 [2.99] AC(L) – AC Line 3 4 Triple AC(N) – AC Neutral 2 54.0 [2.13] Indication LED Top view 46.0 [1.81] 1 7 6 5 4 3 Dual (D512) Note: Screw type Terminal: Wires 1.5mm2 max. Recommended Terminal Screw tightening torque: 0.5Nm (3.5lb.in.) max. ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pin pitch tolerance: ±0.25 (0.01) Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 132g E-mail:sales@minmax.com.tw 2023/12/27 REV:28 Tel:886-6-2923150 Page 4 of 5 www.minmaxpower.com AKF-15 SERIES AC-DC Power Module 15W Package Specifications for screw terminal with DIN Rail Mounting (order code suffix AC-DIN-01) Mechanical Dimensions Indication LED 46.0 [1.81] 7 6 5 4 3 2 Top view 1 54.0 [2.13] 4XØ3.5 DCON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 12.7 [0.50] 23.3 [0.92] 11.0 [0.43] 5.0 [0.20] 3.0 [0.12] 16.8 [0.66] 10.0 [0.39] 76.0 [2.99] Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 186g Screw terminal with DIN Rail Mounting Order Code Table PCB Mounting AKF-15S05 Chassis Mounting AKF-15S05C PCB Mounting With UL508 AKF-15S05ICE Chassis Mounting With UL508 AKF-15S05CICE AKF-15S12 AKF-15S15 With DIN Rail Mounting by two Order Code AKF-15S05C AC-DIN-01 AKF-15S12C AKF-15S12ICE AKF-15S12CICE AKF-15S12C AC-DIN-01 AKF-15S12CICE AC-DIN-01 AKF-15S15C AKF-15S15ICE AKF-15S15CICE AKF-15S15C AC-DIN-01 AKF-15S15CICE AC-DIN-01 AKF-15S24 AKF-15S24C AKF-15S24ICE AKF-15S24CICE AKF-15S24C AC-DIN-01 AKF-15S24CICE AC-DIN-01 AKF-15S48 AKF-15S48C AKF-15S48ICE AKF-15S48CICE AKF-15S48C AC-DIN-01 AKF-15S48CICE AC-DIN-01 AKF-15D12 AKF-15D12C AKF-15D12ICE AKF-15D12CICE AKF-15D12C AC-DIN-01 AKF-15D12CICE AC-DIN-01 AKF-15D15 AKF-15D15C AKF-15D15ICE AKF-15D15CICE AKF-15D15C AC-DIN-01 AKF-15D15CICE AC-DIN-01 AKF-15D512 AKF-15D512C --- --- AKF-15D512C AC-DIN-01 --- --- AKF-15T512 AKF-15T512C --- --- AKF-15T512C AC-DIN-01 --- --- AKF-15T515 AKF-15T515C --- --- AKF-15T515C AC-DIN-01 --- --- No. 77, Sec. 1, Zhonghua W. Rd., South Dist., Tainan City 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw Chassis Mounting with UL508 & DIN Rail Mounting by two Order Code AKF-15S05CICE AC-DIN-01 Minmax Technology Co., Ltd. 2023/12/27 REV:28 Page 5 of 5