FR-D740-050SC-EC

Specifications /// Product Information EBG 184-EN MITSUBISHI ELECTRIC FACTORY AUTOMATION Type FR-D720S-008-EC FR-D720S-014-EC FR-D720S-025-EC FR-D720S-042-EC FR-D720S-070-EC FR-D720S-0100-EC FR-D740-012-EC FR-D740-022-EC FR-D740-036-EC FR-D740-050-EC FR-D740-080-EC FR-D740-120-EC FR-D740-160-EC 200 V Type 400 V Type ND (normal duty) 150 % 200 % 50 °C Rated current [A] * 0.8 1.4 2.5 4.2 7.0 10.0 1.2 2.2 3.6 5.0 8.0 12 16 Rated motor capacity [kW] * 0.1 0.2 0.4 0.75 1.5 2.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5 WxHxD (mm) 68 x 128 x 80.5 68 x 128 x 80.5 68 x 128 x 142.5 68 x 128 x 162.5 108 x 128 x 155.5 140 x 150 x 155.5 108 x 128 x 129.5 108 x 128 x 129.5 108 x 128 x 135.5 108 x 128 x 155.5 108 x 128 x 165.5 220 x 150 x 155 220 x 150 x 155 FR-D700 H Overload capacity 60 seconds overload 3 seconds overload Ambient temperature D W W Frequency Inverters The micro-drive solution Small, cost-effective, reliable * Standard operation / initial value Operating conditions Voltage Ambient temperature Storage temperature Ambient humidity Altitude Specifications 1-phase, 200 – 240 V (–15 %, +10 %) or 3-phase, 380 – 480 V (–15 %, +10 %) –10 ºC to +50 °C (non freezing) –20 °C to +65 °C Max. 90 % relative humidity (non condensing) Max.1000 m above sea level EUROPEAN BRANCHES EUROPEAN REPRESENTATIVES MITSUBISHI ELECTRIC EUROPE B.V. FRANCE 25, Boulevard des Bouvets F-92741 Nanterre Cedex Phone +33 (0)1 / 55 68 55 68 MITSUBISHI ELECTRIC EUROPE B.V. GERMANY Gothaer Straße 8 D-40880 Ratingen Phone +49 (0)21 02 / 4 86-0 MITSUBISHI ELECTRIC EUROPE B.V. IRELAND Westgate Business Park, Ballymount IRL-Dublin 24 Phone +353 (0)1 / 419 88 00 MITSUBISHI ELECTRIC EUROPE B.V. ITALY Viale Colleoni 7 I-20041 Agrate Brianza (MI) Phone +39 039 / 60 53 1 MITSUBISHI ELECTRIC EUROPE B.V. SPAIN Carretera de Rubi, 76-80 E-08190 Sant Cugat del Vallés Phone +34 93 / 565 31 31 MITSUBISHI ELECTRIC EUROPE B.V. UK Travellers Lane UK-Hatfield Herts. AL10 8 XB Phone +44 (0)1707 / 27 61 00 GEVA Austria Wiener Straße 89 AT-2500 Baden Phone: +43 (0)2252 / 85 55 20 TEHNIKON BELARUS Oktyabrskaya 16/5, Off. 703-711 BY-220030 Minsk Phone: +375 (0)17 / 210 46 26 KONING & HARTMAN B.V. BELGIUM Woluwelaan 31 BE-1800 Vilvoorde Phone: +32 (0)2 / 257 02 40 AKHNATON BULGARIA 4 Andrej Ljapchev Blvd. Pb 21 BG-1756 Sofia Phone: +359 (0)2 / 97 44 05 8 INEA CR d.o.o. CROATIA Losinjska 4 a HR-10000 Zagreb Phone: +385 (0)1 / 36 940 - 01/ -02/ -03 AutoCont CS s.r.o. CZECH REPUBLIC Jelinkova 59/3 CZ-721 00 Ostrava Svinov Phone: +420 (0)59 / 5691 150 AutoCont CS s.r.o. CZECH REPUBLIC Technologická 374/6 CZ-708 00 Ostrava - Pustkovec Phone: +420 595 691 150 MITSUBISHI ELECTRIC FACTORY AUTOMATION B:TECH, a.s. CZECH REPUBLIC Na Ostrove 84 CZ-58001 Havlickuv Brod Phone: +420 (0)569 / 408 841 B:TECH, a.s. CZECH REPUBLIC Headoffice, U Borové 69 CZ-58001 Havlickuv Brod Phone: +420 569 777 777 Beijer Electronics A/S DENMARK Lautruphoj 1-3 DK-2750 Ballerup Phone: +45 (0)70 / 26 46 46 Beijer Electronics Eesti OÜ ESTONIA Pärnu mnt.160i EE-11317 Tallinn Phone: +372 (0)6 / 51 81 40 Beijer Electronics OY FINLAND Jaakonkatu 2 FIN-01620 Vantaa Phone: +358 (0)207 / 463 500 UTECO A.B.E.E. GREECE 5, Mavrogenous Str. GR-18542 Piraeus Phone: +30 211 / 1206 900 MELTRADE Ltd. HUNGARY Fertõ utca 14. HU-1107 Budapest Phone: +36 (0)1 / 431-9726 Operating conditions Protection Shock resistance Vibration resistance Certifications SHERF MOTION TECHN. Ltd. ISRAEL Rehov Hamerkava 19 IL-58851 Holon Phone: +972 (0)3 / 559 54 62 Kazpromautomatics Ltd. KAZAHSTAN 2, Scladskaya str. KAZ-470046 Karaganda Phone: +7 3212 / 50 11 50 Beijer Electronics SIA LETTONIA Vestienas iela 2 LV-1035 Riga Phone: +371 (0)784 / 2280 Beijer Electronics UAB LITHUANIA Savanoriu Pr. 187 LT-02300 Vilnius Phone: +370 (0)5 / 232 3101 INTEHSIS srl MOLDOVA bld. Traian 23/1 MD-2060 Kishinev Phone: +373 (0)22 / 66 4242 Beijer Electronics A/S NORWAY Postboks 487 NO-3002 Drammen Phone: +47 (0)32 / 24 30 00 KONING&HARTMANB.V. NETHERLANDS Haarlerbergweg 21-23 NL-1101 CH Amsterdam Phone: +31 (0)20 / 587 76 00 Specifications IP20 10 G Max. 0.6 G CE/UL/cUL/GOST/RoHS MPL Technology Sp. z o.o. POLAND Ul. Krakowska 50 PL-32-083 Balice Phone: +48 (0)12 / 630 47 00 Sirius Trading & Services ROMANIA Aleea Lacul Morii Nr. 3 RO-060841 Bucuresti, Sector 6 Phone: +40 (0)21 / 430 40 06 CONSYS RUSSIA Promyshlennaya st. 42 RU-198099 St. Petersburg Phone: +7 812 / 325 36 53 ELECTROTECHNICAL SYSTEMS RUSSIA Derbenevskaya st. 11A, Office 69 RU-115114 Moscow Phone: +7 495 / 744 55 54 ELEKTROSTILY RUSSIA Rubzowskaja nab. 4-3, No. 8 RU-105082 Moscow Phone: +7 495 / 545 3419 RPS-AUTOMATIKA RUSSIA Budennovsky 97, Office 311 RU-344007 Rostov on Don Phone: +7 8632 / 22 63 72 STC DRIVE TECHNIQUE RUSSIA Poslannikov per. 9, str 1 RU-105005 Moscow Phone: +7 495 / 790 72 10 Craft Co. & Engineering d.o.o. SERBIA Bulevar Svetog Cara Konstantina 80-86 SER-18106 Nis Phone: +381 (0)18 / 292-24-4/5 , 523 962 INEA SR d.o.o. SERBIA Karadjordjeva 12/260 SER-113000 Smederevo Phone: +381 (0)26 / 617 163 CS MTrade Slovensko SLOVAKIA Vajanskeho 58 SK-92101 Piestany Phone: +421 (0)33 / 7742 760 INEA d.o.o. SLOVENIA Stegne 11 SI-1000 Ljubljana Phone: +386 (0)1 / 513 8100 Beijer Electronics AB SWEDEN Box 426 S-20124 Malmö Phone: +46 (0)40 / 35 86 00 Econotec AG SWITZERLAND Hinterdorfstr. 12 CH-8309 Nürensdorf Phone: +41 (0)44 / 838 48 11 GTS TURKEY Darulaceze Cad. No. 43 KAT. 2 TR-34384 Okmeydani-Istanbul Phone: +90 (0)212 / 320 1640 CSC Automation Ltd. UKRAINE 15, M. Raskova St., Fl. 10, Office 1010 UA-02002 Kiev Phone: +380 (0)44 / 494 33 55 Simple, time-saving startup CBI Ltd. SOUTH AFRICA Private Bag 2016 ZA-1600 Isando Phone: + 27 (0)11 / 928 2000 Flexible and versatile in application Space-saving installation thanks to compact design Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// info@mitsubishi-automation.com /// www.mitsubishi-automation.com Specifications subject to change /// Art. no. 213988-A /// 04.2008 All trademarks and copyrights acknowledged. Higher energy savings with the OEC function The ultra compact standard inverter Flexible concept 쐽 Compact installation Due to the ultra-compact dimensions the FR-D700 can be mounted directly side by side. A line within the FR-D700 series allows effective, space-saving heat dissipation through an approx. 1 cm thick cooling plate (“flat plate”, up to 3.7 kW). Simple operation 쐽 Simple cabling The integrated spring clamps to connect control and power lines quickly ensure reliable and simple cabling. 쐽 Easy parameterization With the help of the parameterization software FR-Configurator a series of easy functions such as graphical machine analysis to optimize the drive system are available. 쐽 Integrated control unit The integrated Digital Dial gives the user direct access to all important parameters much more quickly than would be possible with normal keys. Door and gate drives are only some of the multiple applications of the new FR-D700 series. The FR-D700 is especially advantageous for standard applications by virtue of its userfriendliness. It is the correct choice in both simple and more sophisticated applications. Typical applications are feeder and conveyor drives, machining tools or gate and door drives. 쐽 Short service times The fans are designed as compact units that can be replaced in less than 10 seconds for cleaning or in the event of failure. More standard functions To protect both staff and valuable machinery, the FR-D700 has innovative functions that enable it to respond with great sensitivity to a variety of external factors. 쐽 Sensorless vector control The sensorless vector control of the FR-D700 also makes it possible to achieve exceptional speed and torque performance even without a motor with sensor. This saves additional hardware costs. 쐽 Controlled deceleration during brief power failures The frequency inverter can respond to power failures using regenerative energy to perform controlled deceleration of the motor. This prevents uncontrolled rundown and damage, for example, to textile machines. 쐽 Automatic restart after power failures In pump and fan applications you can configure the inverter to resume power after brief power failures. The system then catches the coasting motor and automatically accelerates it back to the preset speed. 쐽 Integrated emergency stop function* The FR-D700 series has an emergency stop input for safe shutdown. This ensures safe operation in compliance with the European Machinery Directive without installation of a second protection mechanism. The FR-D700 thus conforms to the ISO13849-1 (EN954-1) cat. 3 and IEC60204-1 cat. 0 standards. Removable comb-like cable bushing * available from summer 2008 Cabling and fan replacement made easy Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives. Conveyor belts and chain conveyors are an ideal application for the FR-D700. Compliance to international standards such as CE, UL, cUL, GOST, RoHS guarantees worldwide use. In addition to entering and displaying various parameters, the integrated four-digit LED display also monitors and displays current operating values and alarm messages. Entry into the drive universe Improved functions and device properties such as simplified cabling thanks to spring clamps, the integrated Digital Dial with LED display, improved performance yield in the low-speed range as well as the integrated emergency stop function make the FR-D700 the new standard in the ultra compact class. 쐽 Simple network connection The standard configuration of the FR-D700 has a serial interface (RS485) which allows communication with a PC and a PLC. Modbus RTU also is supported. Upgraded functional scope The built-in multi-user panel with Digital Dial 쐽 Failure safety with self-diagnostics This inverter actively monitors its own functional safety. If, for example, the fan rpm decreases to 50 %, a pre-alarm is triggered. An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation. 쐽 Independent motor setting The independent motor setting is based on the Autotuning function that can read out all the parameters needed for the motor model in less than a minute even when it is not running. 쐽 High overload capacity of 200 % The maximum short-term overload capacity of 200 % for 0.5 s minimizes downtimes caused by overload alarms. 쐽 Integrated brake chopper The built-in brake transistor of the FR-D700 supports direct connection of an external braking resistor to improve stopping power. Additional energy savings The FR-D700’s OEC function helps to further optimize current and hence power consumption of the motor. The result is an additional decrease in energy requirement compared to a conventional inverter. Long service life Only one protection mechanism is needed. The FR-D700 is designed for a service life of over 10 years. This is made possible, among other things, by high-performance heatresistant capacitors, cooling fans with sealed bearings and special lubricating grease. The flow of cooling air comes into contact only with the heat sinks and not electronic components. This ensures that no dust or dirt can collect on the components. The circuit boards are protected against aggressive environments with single or double layer conformal coating – another feature that ensures longer service life. The ultra compact standard inverter Flexible concept 쐽 Compact installation Due to the ultra-compact dimensions the FR-D700 can be mounted directly side by side. A line within the FR-D700 series allows effective, space-saving heat dissipation through an approx. 1 cm thick cooling plate (“flat plate”, up to 3.7 kW). Simple operation 쐽 Simple cabling The integrated spring clamps to connect control and power lines quickly ensure reliable and simple cabling. 쐽 Easy parameterization With the help of the parameterization software FR-Configurator a series of easy functions such as graphical machine analysis to optimize the drive system are available. 쐽 Integrated control unit The integrated Digital Dial gives the user direct access to all important parameters much more quickly than would be possible with normal keys. Door and gate drives are only some of the multiple applications of the new FR-D700 series. The FR-D700 is especially advantageous for standard applications by virtue of its userfriendliness. It is the correct choice in both simple and more sophisticated applications. Typical applications are feeder and conveyor drives, machining tools or gate and door drives. 쐽 Short service times The fans are designed as compact units that can be replaced in less than 10 seconds for cleaning or in the event of failure. More standard functions To protect both staff and valuable machinery, the FR-D700 has innovative functions that enable it to respond with great sensitivity to a variety of external factors. 쐽 Sensorless vector control The sensorless vector control of the FR-D700 also makes it possible to achieve exceptional speed and torque performance even without a motor with sensor. This saves additional hardware costs. 쐽 Controlled deceleration during brief power failures The frequency inverter can respond to power failures using regenerative energy to perform controlled deceleration of the motor. This prevents uncontrolled rundown and damage, for example, to textile machines. 쐽 Automatic restart after power failures In pump and fan applications you can configure the inverter to resume power after brief power failures. The system then catches the coasting motor and automatically accelerates it back to the preset speed. 쐽 Integrated emergency stop function* The FR-D700 series has an emergency stop input for safe shutdown. This ensures safe operation in compliance with the European Machinery Directive without installation of a second protection mechanism. The FR-D700 thus conforms to the ISO13849-1 (EN954-1) cat. 3 and IEC60204-1 cat. 0 standards. Removable comb-like cable bushing * available from summer 2008 Cabling and fan replacement made easy Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives. Conveyor belts and chain conveyors are an ideal application for the FR-D700. Compliance to international standards such as CE, UL, cUL, GOST, RoHS guarantees worldwide use. In addition to entering and displaying various parameters, the integrated four-digit LED display also monitors and displays current operating values and alarm messages. Entry into the drive universe Improved functions and device properties such as simplified cabling thanks to spring clamps, the integrated Digital Dial with LED display, improved performance yield in the low-speed range as well as the integrated emergency stop function make the FR-D700 the new standard in the ultra compact class. 쐽 Simple network connection The standard configuration of the FR-D700 has a serial interface (RS485) which allows communication with a PC and a PLC. Modbus RTU also is supported. Upgraded functional scope The built-in multi-user panel with Digital Dial 쐽 Failure safety with self-diagnostics This inverter actively monitors its own functional safety. If, for example, the fan rpm decreases to 50 %, a pre-alarm is triggered. An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation. 쐽 Independent motor setting The independent motor setting is based on the Autotuning function that can read out all the parameters needed for the motor model in less than a minute even when it is not running. 쐽 High overload capacity of 200 % The maximum short-term overload capacity of 200 % for 0.5 s minimizes downtimes caused by overload alarms. 쐽 Integrated brake chopper The built-in brake transistor of the FR-D700 supports direct connection of an external braking resistor to improve stopping power. Additional energy savings The FR-D700’s OEC function helps to further optimize current and hence power consumption of the motor. The result is an additional decrease in energy requirement compared to a conventional inverter. Long service life Only one protection mechanism is needed. The FR-D700 is designed for a service life of over 10 years. This is made possible, among other things, by high-performance heatresistant capacitors, cooling fans with sealed bearings and special lubricating grease. The flow of cooling air comes into contact only with the heat sinks and not electronic components. This ensures that no dust or dirt can collect on the components. The circuit boards are protected against aggressive environments with single or double layer conformal coating – another feature that ensures longer service life. Specifications /// Product Information EBG 184-EN MITSUBISHI ELECTRIC FACTORY AUTOMATION Type FR-D720S-008-EC FR-D720S-014-EC FR-D720S-025-EC FR-D720S-042-EC FR-D720S-070-EC FR-D720S-0100-EC FR-D740-012-EC FR-D740-022-EC FR-D740-036-EC FR-D740-050-EC FR-D740-080-EC FR-D740-120-EC FR-D740-160-EC 200 V Type 400 V Type ND (normal duty) 150 % 200 % 50 °C Rated current [A] * 0.8 1.4 2.5 4.2 7.0 10.0 1.2 2.2 3.6 5.0 8.0 12 16 Rated motor capacity [kW] * 0.1 0.2 0.4 0.75 1.5 2.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5 WxHxD (mm) 68 x 128 x 80.5 68 x 128 x 80.5 68 x 128 x 142.5 68 x 128 x 162.5 108 x 128 x 155.5 140 x 150 x 155.5 108 x 128 x 129.5 108 x 128 x 129.5 108 x 128 x 135.5 108 x 128 x 155.5 108 x 128 x 165.5 220 x 150 x 155 220 x 150 x 155 FR-D700 H Overload capacity 60 seconds overload 0.5 seconds overload Ambient temperature D H W Frequency Inverters The micro-drive solution Small, cost-effective, reliable * Standard operation / initial value Operating conditions Voltage Ambient temperature Storage temperature Ambient humidity Altitude Specifications 1-phase, 200 – 240 V (–15 %, +10 %) or 3-phase, 380 – 480 V (–15 %, +10 %) –10 ºC to +50 °C (non freezing) –20 °C to +65 °C Max. 90 % relative humidity (non condensing) Max.1000 m above sea level EUROPEAN BRANCHES EUROPEAN REPRESENTATIVES MITSUBISHI ELECTRIC EUROPE B.V. GERMANY Gothaer Straße 8 D-40880 Ratingen Phone: +49 (0)2102 / 486-0 MITSUBISHIELECTRICEUROPEB.V. CZECH REPUBLIC Radlická 714/113a CZ-158 00 Praha 5 Phone: +420 (0)251 551 470 MITSUBISHI ELECTRIC EUROPE B.V. FRANCE 25, Boulevard des Bouvets F-92741 Nanterre Cedex Phone: +33 (0)1 / 55 68 55 68 MITSUBISHI ELECTRIC EUROPE B.V. ITALY Viale Colleoni 7 I-20041 Agrate Brianza (MB) Phone: +39 039 / 60 53 1 MITSUBISHI ELECTRIC EUROPE B.V. POLAND Krakowska 50 PL-32-083 Balice Phone: +48 (0)12 / 630 47 00 MITSUBISHI ELECTRIC EUROPE B.V. SPAIN Carretera de Rubí 76-80 E-08190 Sant Cugat del Vallés (Barcelona) Phone: 902 131121 // +34 935653131 MITSUBISHI ELECTRIC EUROPE B.V. UK Travellers Lane UK-Hatfield, Herts. AL10 8XB Phone: +44 (0)1707 / 27 61 00 GEVA AUSTRIA Wiener Straße 89 AT-2500 Baden Phone: +43 (0)2252 / 85 55 20 TEHNIKON BELARUS Oktyabrskaya 16/5, Off. 703-711 BY-220030 Minsk Phone: +375 (0)17 / 210 46 26 ESCO D & A BELGIUM Culliganlaan 3 BE-1831 Diegem Phone: +32 (0)2 / 717 64 30 Koning & Hartman b.v. BELGIUM Woluwelaan 31 BE-1800 Vilvoorde Phone: +32 (0)2 / 257 02 40 INEA BH d.o.o. BOSNIA AND HERZEG. Aleja Lipa 56 BA-71000 Sarajevo Phone: +387 (0)33 / 921 164 AKHNATON BULGARIA 4 Andrej Ljapchev Blvd. Pb 21 BG-1756 Sofia Phone: +359 (0)2 / 817 6004 INEA CR d.o.o. CROATIA Losinjska 4 a HR-10000 Zagreb Phone: +385(0)1/36940-01/-02/-03 MITSUBISHI ELECTRIC FACTORY AUTOMATION AutoCont C.S. s.r.o. CZECH REPUBLIC Technologická 374/6 CZ-708 00 Ostrava-Pustkovec Phone: +420 595 691 150 B:ELECTRIC, s.r.o. CZECH REPUBLIC Mladoboleslavská 812 CZ-197 00 Praha 19 - Kbely Phone: +420 286 850 848 Beijer Electronics A/S DENMARK Lykkegårdsvej 17, 1. DK-4000 Roskilde Phone: +45 (0)46/ 75 76 66 Beijer Electronics Eesti OÜ ESTONIA Pärnu mnt.160i EE-11317 Tallinn Phone: +372 (0)6 / 51 81 40 Beijer Electronics OY FINLAND Jaakonkatu 2 FIN-01620 Vantaa Phone: +358 (0)207 / 463 500 UTECO A.B.E.E. GREECE 5, Mavrogenous Str. GR-18542 Piraeus Phone: +30 211 / 1206 900 MELTRADE Ltd. HUNGARY Fertõ utca 14. HU-1107 Budapest Phone: +36 (0)1 / 431-9726 Operating conditions Protection Shock resistance Vibration resistance Certifications KazpromautomaticsLtd. KAZAKHSTAN Mustafina Str. 7/2 KAZ-470046 Karaganda Phone: +7 7212 / 50 11 50 Beijer Electronics SIA LATVIA Vestienas iela 2 LV-1035 Riga Phone: +371 (0)784 / 2280 Beijer Electronics UAB LITHUANIA Savanoriu Pr. 187 LT-02300 Vilnius Phone: +370 (0)5 / 232 3101 ALFATRADE Ltd. MALTA 99, Paola Hill Malta- Paola PLA 1702 Phone: +356 (0)21 / 697 816 INTEHSIS srl MOLDOVA bld. Traian 23/1 MD-2060 Kishinev Phone: +373 (0)22 / 66 4242 HIFLEXAUTOM.B.V. NETHERLANDS Wolweverstraat 22 NL-2984 CD Ridderkerk Phone: +31 (0)180 – 46 60 04 Koning&Hartmanb.v. NETHERLANDS Haarlerbergweg 21-23 NL-1101 CH Amsterdam Phone: +31 (0)20 / 587 76 00 Specifications IP20 10 G Max. 0.6 G CE/UL/cUL/GOST/RoHS Beijer Electronics AS NORWAY Postboks 487 NO-3002 Drammen Phone: +47 (0)32 / 24 30 00 Sirius Trading & Services ROMANIA Aleea Lacul Morii Nr. 3 RO-060841 Bucuresti, Sector 6 Phone: +40 (0)21 / 430 40 06 Craft Con. & Engineering d.o.o. SERBIA Bulevar Svetog Cara Konstantina 80-86 SER-18106 Nis Phone: +381 (0)18 / 292-24-4/5 INEA SR d.o.o. SERBIA Izletnicka 10 SER-113000 Smederevo Phone: +381 (0)26 / 617 163 AutoCont Control s.r.o. SLOVAKIA Radlinského 47 SK-02601 Dolny Kubin Phone: +421 (0)43 / 5868210 CS MTrade Slovensko, s.r.o. SLOVAKIA Vajanskeho 58 SK-92101 Piestany Phone: +421 (0)33 / 7742 760 INEA d.o.o. SLOVENIA Stegne 11 SI-1000 Ljubljana Phone: +386 (0)1 / 513 8100 Beijer Electronics AB SWEDEN Box 426 SE-20124 Malmö Phone: +46 (0)40 / 35 86 00 Econotec AG SWITZERLAND Hinterdorfstr. 12 CH-8309 Nürensdorf Phone: +41 (0)44 / 838 48 11 GTS TURKEY Bayraktar Bulvari Nutuk Sok. No:5 TR-34775 Yukari ISTANBUL Phone: +90 (0)216 526 39 90 CSC Automation Ltd. UKRAINE 4-B, M. Raskovoyi St. UA-02660 Kiev Phone: +380 (0)44 / 494 33 55 SHERF Motion Techn. Ltd. ISRAEL Rehov Hamerkava 19 IL-58851 Holon Phone: +972 (0)3 / 559 54 62 CEG INTERNATIONAL LEBANON Cebaco Center/Block A Autostrade DORA Lebanon - Beirut Phone: +961 (0)1 / 240 430 CBI Ltd. SOUTH AFRICA Private Bag 2016 ZA-1600 Isando Phone: + 27 (0)11 / 928 2000 Simple, time-saving startup Flexible and versatile in application Space-saving installation thanks to compact design Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// info@mitsubishi-automation.com /// www.mitsubishi-automation.com Specifications subject to change /// Art. no. 213988-A /// 08.2008 All trademarks and copyrights acknowledged. Higher energy savings with the OEC function